An active hunter in Hokkaido was thrown into another world.

"So, as far as you guys are concerned, you want the handles to remain secret this time, right?

The city has regained its calm and the noise has subsided as the Slimes have fled. We've been sneaking off the customs building since we got quiet too, and we're coming to Hunter Guild for now.

"Right."

"Hmmm...... Well, I know. If I could crusade Lyleslime that way, my lord would fly, and if I heck, my country would summon me. Your lives are a mess."

"If you can push troublesome or dangerous things, it's still fine. You've decided to be used for something bad like this. We want to live quietly in the village of Elves."

"That's right..."

Guildmaster Bal sighs.

"It sounded great, but it's in the city. I don't even know exactly which way they sounded from echoing around. They haven't even seen you guys slime attacking because it's from the rooftops, and there's no way some guys think you can attack from that distance. Everybody thinks there's lightning in the slime."

Although it was a blue sky with no clouds.

"Both lords and greats are very busy preparing to escape and come to the front gate. Well, God heavenly punished Slime, or something like that. I'll tell you from the guild that all of a sudden the thunder fell and hit the slime. The Sacrament Church will be delighted. The lead soldiers succeeded in pushing it back. If you guys don't demand a hand, there's as much deception as there is."

Even if I say God, God in this world is that always tense Mr. Nanothes.

"Um, I'm talking about a hundred pieces of gold I borrowed."

"Oh, that's enough. Take it. I'll take care of it in my guild. Your magic costs money, doesn't it? If that can be crusaded with a hundred gold coins, it's cheap."

That's what Mr. Bal says. Hilarious hands.

I counted it later and there were about eighty pieces left.

H&H Magnum's Remington M700, was expensive as Remington, but that's why it was much cheaper than Holland and Holland made. If you're going to make money, don't hesitate.

"Which kind of magic costs money. Ah. That's surprisingly troublesome, you guys. There is no gold in the village of Elves. So this is how you come to earn money every once in a while, huh? Don't you?"

That's sharp. That's the Alliance Master.

"... you're actually right"

"I knew it. No, that's what makes me look over here every once in a while. I appreciate it. I'd like you to live here, if you mean it, but I guess you won't. Either way, you guys came at the best time. Thank you."

"Um, where's the Hunter's party that called that in?

"That's a bummer. If we suck, we can all tie ourselves up. Hunters say fired, fined and hundreds of gold coins from the guild. I'm having a hard time deceiving myself about this hunter."

"If that's the case, you know..."

When I try to get the gold out of my bag, Mr. Bal shakes his head.

"No, Sin. You're sweet. You're thinking of doing something else. No, no, no, no. Mistakes require punishment. Otherwise this will happen many times. You guys need to think about it a little bit more and make sure you don't get used to it. Don't you guys move on this anymore. You got it."

……

That's right......

"Anyway, it's not going to be a day of work. Come back tomorrow. Work resumes tomorrow. You have something you want me to buy you out, don't you? Show your face to me."

"Yes."

"Uh, before that"

Mr. Bal spoke to us when he tried to leave the room.

"Get me a pigeon. There's a lot of guys living in the warehouse again. Merchant guild people too. Tomorrow."

"... Yes, sir"

There's really nothing you can do about the pigeon.

"You've been kind of a pain in the ass"

"I want to return to the village of Elves soon. The wedding will be postponed."

"That's right. You feel sorry for me when that happens. Shall I shop first today? Hundred pieces of gold. Mr. Bal gave it to me."

"Agree!"

So, the two of us went around the market and shopped all day that day.

Hardware, dishes are fine, but what shall we do with the futon?

The finished product is for sale, but it doesn't just go into the mouth of the magic bag, does it?

Shall I just buy this from the farmer?

It's tough.

"This is it, but come on..."

"Yeah, I'll buy you this..."

Cano's request for Milno with a thoughtful batten.

Let's say it's a gift from us.

That night, I took a lodging to discreetly wash my body in a bucket.

There was a mole on my shoulder. I can't get my arms up.

I feel like my horse kicked me in the shoulder over and over again.

Saran's been healing me, palming me.

Saran isn't an amazing magician, he says he's a level of magic anyone can do if he's an elf, but he's limp and feels good...

"I'm going to repel that one, so Sin is amazing after all"

"I rely on tools..."

"But Lyle Slime is telling me to run away if I find him even in the elves. There was no one in this country who could defeat it either, and now it's safe to assume that Lyleslime would be okay if it came out in the village of Copoli. Thanks, Sin."

"You're welcome. But you're strong for slime. I just thought I was the weakest monster."

"Because there's a lot going on in the slime, too. Something like snakes and hydra."

"Or so it is."

Manga makes enemies stronger and stronger.

Even in movies, two or three. Enemy roles get stronger and stronger.

I can't be as strong as the main character because I'm a normal person. [M]

Today's slime was also critical to defeat......

What if a stronger hunting gun comes along?

Even so, can you shoot me? [M]

H&H Magnum, let's practice so we can shoot properly.

I also need to put the scope on......

……

I woke up in the morning and my arm was going up.

The mole is completely gone, too. Good......

Saran is sitting beside the bed, sleeping with only his head on it.

You watched me all night...... Thanks.

"Saran...... Saran......"

Swing gently.

"Mmm...... Oh, hi, Sin."

"Oh dear. Thanks for checking in. I'm perfectly cured."

"Really? Good"

"You haven't slept much. You can sleep."

I get out of bed and get out of bed and recommend it to Saran.

If it was normal, princess, I wish I could duck you and put you to sleep so you wouldn't wake Saran, but Saran, you're so much bigger than me. I can't do that.

I'm stuck.

Watching Saran snuggle into bed and sleep twice, I try to take out the Remington M700, which I didn't take care of yesterday.

Wow...... this.

It says MODEL 700 1962-2012 FIFTY YEARS on the magazine floor plate (* 1).

It's the 50th anniversary model.

I've been active for fifty years. Ah. Stock wood is also beautiful. Obviously I use good material. The M700 is the finest. Premium model. Twenty gold coins...... Were you left unsold at the store?

You don't have to be Remington to buy a more luxury rifle if you're about to give me this kind of money. Sakoh? Are you saying that no one wants H&H Magnum right now?

Well, I don't think I shopped badly.

Because it looks just like the M700 my grandfather had.

Stock of walnut material with illumination stars and photo gates.

They will be scratched over the course of battle, and the black dye will also peel off and become silver.

I can't believe the shiny iron cannon will always be cooler that way.

The bullet... only comes in three rounds.

375 H&H Magnum, right? As a hunting rifle, it's one of the largest calibers, because one inch is 25.4 mm, at 25.4 x 0.375......

I calculate this in my notebook because I just can't calculate it.

9.5 mm? Awesome...

By the way, the caliber of the rifle that can be possessed in Japan is not more than 10.5 mm.

Even the Japanese can manage to possess it.

I've never seen anyone use such a large caliber.

The rear end of the stock, shoulder (recoil pad), is made of thick, soft rubber.

If it weren't for this, shoulder, mole, then I might have been sorry. Long live the modern rifle.

Push the bolt release to pull the bolt out. The same Remington stream as only two rocking rugs to shoot H&H magnums. (* 2)

I trust you, don't I? Don't break it or anything.

"375 caliber nylon brush"

Buy a brush for cleaning by adding silver coins.

Blow the WD-40 into the chamber with a blur on the engine section and attach the brush to the front and rear of the cleaning rod. Some people just come from the pharmacy to the barrel of a gun and don't let it go back and forth, but I don't really care. But instead of gripping the rod and letting it go back and forth at this time, I just have to push it and make sure the brush rotates with the rifling.

I always only use nylon brushes, but I think I'll use a brass brush if something happens that will cause my hitting accuracy to drop.

The revolution (twisted straight) of the rifle for the sabot slug of the M870, which is a shotgun, is 90 cm.

The length of the barrel is not 90 cm, which means that even if the bullet passes from beginning to end of the barrel, it has not spinned a turn.

It's late, isn't it? Plus, it's half rifle, so it's about half sharpened.

Everyone thinks, "Half rifle is less hit accurate than full rifle because it's sharpened," but I don't think it's actually much different.

I see a lot of videos of outsiders shooting shotgun rifles in international videos, but that doesn't mean they're hitting me better than my half rifle. Around nappy.

You put him on the bench at the shooting range and shoot him, so the conditions are the same. So you're no different than me, so it's not a bad hit because it's a half-life.

I was talking about Twisted Straight. The rifles are usually all a little over 30 cm.

About two revolutions with a 24-inch rifle barrel. So when you push the brush in, the rod rotates roughly two times until the brush pops out of the barrel.

All you have to do is patch it at the end of the cleaning rod and push it in to remove dirt and oil, OK.

Take a peek at the barrel from the pharmacy side.

Yeah, shiny.

Scope, I don't know what to do.

This gun has a front sight and a rear sight, but of course, it's not like the scope can't be mounted. There are screw holes that attach the scope.

But if it's a gun with so much recoil, people who don't have the stature can't support recoil, and you hit the scope in the eye, and you're seriously hurt.

I'm not sure about my physique.

H&H Magnum is 1.8 times more powerful than 308 Winchester.

The actual recoil felt about double because of the large caliber.

You should avoid ambushing and shooting directly at your shoulders. I shot him in the knee yesterday, but I'm glad that was it. Because I can flush recoil with my torso.

It was an extreme overlooking shooting with sniping from the roof, so you couldn't ambush it. I was lucky.

I've been shooting a few hundred shots at 308 in the last few months, so I'm a lot better at it, but I guess I'm a long way from being able to use the H&H magnum.

Yeah, let's get rid of the scope until we can flush the recoil well.

I'll use it on the iron site for a while.

Some people might think, "You can just put a dat site on it" or something.

I can't use that...

I don't see it at all when it's a little bright. Hokkaido at midday, on a snowfield, you have no idea where the dots are. Big dots are also a problem. There's no use for 2MOA in diameter. It's a circle over 5cm away at 100m, right? I don't trust you at all.

I'll think about it when I have to use it in a dark place like a dungeon in the future.

Wipe the engine part well with a cloth dampened with oil, set up the cleaned M700 and shoot it in the air.

Kachi.

Yeah, same.

When the gun changes, so does the filling of the trigger.

You may want to try different types of rifles. But each time it doesn't hit the pivotal moment when the cut of the trigger is different. After all, the best rifle I'm used to using.

So as a single model, you deliberately chose the M700, which has the largest caliber in the world. I...

As a rifle, you have a bit of a heavy set.

Because the ammunition I use is H&H Magnum. You can't help it.

The weight of the trigger is adjustable, but the heavier the trigger, the larger the normal recoil. I'll put a lot of effort into gripping it. I do it when I do it no matter how trained and habituated I am to grip the gutter and pull out only my index finger. Light triggers can be accidents like just putting your fingers on it and letting it erupt.

This trigger will never be understood by anyone who's only shooting a model gun or an airsoft gun. The beauty of the beauty is out of step. I don't want to explain what it feels like to be "pretty," but it definitely hits better than a light trigger or something, even if it's heavy.

Real guns are sharp and sharp like blades because strikers and shea are made of steel. If this is a soft metal such as zinc alloy, it won't sharply grind. That's why I'm not spattered.

Guns are limited to the real thing......

I want to go try and shoot right away, and I want to adjust the site and ballistics, but I'm patient.

I'll go down to the dining room at the inn, take my chips off and go up with breakfast for two. Sarah's still asleep, so suppose I eat first by myself?

Take your time off.

- - Author annotation - -

* 1. Floor plate

In hunting guns that do not have a detachable box-type magazine, the bolts must be operated and drained one shot at a time when the bullet is removed and the magazine is calla. Then it's a hassle, so the bottom of the magazine of this type of rifle opens like a door with a hinge when you press the latch. This means the bottom of the magazine can fall out and the remnants can be removed at once with Zarazala. The magazine follower and plate spring remain stuck to the floor plate so there is no risk of loss.

You may think box-shaped magazines would be better replaced right away, but in hunting, there can't be enough shooting in bulk to shoot while replacing magazines, and few veterans hate this because it can easily cause poor delivery ammunition and if you drop it and lose it, it will make a fuss.

* 2. Rocking Rug

The irregular part that engages when the ammunition is placed in the dispensary and the bolt is turned and closed. The convex on the bolt side is distinguished by the locking lug, and the concave on the chamber side is called the locking licence.

One in 22 caliber, two or three in a regular rifle, and six in three or two rows when it's a magnum rifle, etc. gradually increase. Remington has only two of these, regardless of caliber.

In fact, the area where two or three are engaged does not change, so there is no difference in strength.

If this is 180 degrees two, the operating angle of the bolt is 90 degrees. If it is 120 degrees three, the operating angle of the bolt is 60 degrees. Six to ten automatic guns that can't have a larger rotation angle.

"You'd rather have three or more lugs. The rotation angle of the bolts is also small and has excellent fast fire performance"

"If you can trust that little one, if you don't turn it 90 degrees, you're in danger."

In short, either is fine. Anyone who reads this should not care about such details. (Then don't write)