Chaoshen Technology Trading Mall

After get off work, Wang Bin returned to the laboratory and took all the screw rods processed before into his own science and technology mall store, and he also directly entered the science and technology mall store.

Of course, after entering the store, Wang Bin immediately asked the system to contact Xu Zhenming.

Not long after, Xu Zhenming appeared in Wang Bin's shop and said to Wang Bin: "Mr. Wang! Has the screw been completed?"

"Yes, Mr. Xu, I have completed all the glass screws you want, and although these screws are only level four, if Mr. Xu in your world is capable, you can polish these screws well. Then the precision of these screws can definitely be higher, and it may even reach the standard of three-level screws." Wang Bin said as he brought Xu Zhenming to the screw he ordered.

Then he said, "Mr. Xu, these are the screw rods you ordered, but since our Tiangong Technology can only produce glass now, we can't pack these screw rods with anti-collision packaging, so we can only hand it over to you."

Then Wang Bin pointed to a large number of glass screws and said, "These are the four-level precision screws you ordered! A total of two tons, Mr. Xu can click."

After finishing talking, Wang Bin pointed to a small number of glass screws and said: "Mr. Xu, this pile of screws has a three-level accuracy, a total of 1,000, but considering the scrap rate, so the total here is 1,100. A glass screw!

The last are these secondary screws, here are 110."Wang Bin finally pointed to the smallest number of screw rods and said.

After listening to Wang Bin's words, Xu Zhenming is still a little grateful to Wang Bin. He knows what Wang Bin said about the rejection rate.

But in fact, the things that can be entered into the science and technology mall and used for transactions are all products that have been tested by the science and technology mall and qualified.

Therefore, there is actually no reject rate in the mall, so in fact, these extra screws can be said to be given to him by Wang Bin. Why is he not grateful.

You know, let’s not talk about the second-level screw, only the third-level screw, one energy coin can only buy 100, let alone the second-level screw, there are only ten energy coins, that is to say Wang Bin's so-called scrap rate is actually giving him two energy coins!

"Mr. Wang, thank you!" Xu Zhenming said gratefully!

"Mr. Xu! You don't need to do this, in fact, I am also for your future orders! And when you buy things from me in the future, I will still charge the money I should charge, and it will not be cheaper than others!" Wang Bin Speaking with a smile.

In fact, the first reason why Wang Bin sent these scrap rates to Xu Zhenming is naturally the same as what he said just now. For Xu Zhenming's future orders, there is another reason. Since Wang Bin knows the country where Xu Zhenming is located in the world, then He didn’t mind letting Xu Zhenming get some more cheap money. This would not only improve Xu Zhenming’s own strength, but also improve Xu Zhenming’s ability in the world where Xu Zhenming is located. One name is Huaxia.

"President Wang! I know, thank you anyway!" Xu Zhenming insisted on listening to Wang Bin's words.

Wang Bin shrugged, and then said to Xu Zhenming: "Mr. Xu! How are you thinking about the things I proposed before?"

Of course Xu Zhenming knows what Wang Bin is asking. Naturally, the last time Mr. Wang and him mentioned the use of special glass to manufacture machine tool beds, spindles and bearings and other parts.

"Mr. Wang! I have considered this matter, and I am preparing to try it. This time I am also going to order one or two sets of machine bed and machine tool spindle. As for the bearings, In my world, Huaxia can still buy some high-grade bearings.

And bearings are different from other parts. I think even Mr. Wang, if you want to produce bearings from this glass in a short time, it must be very difficult!After all, whether it is the bed or the spindle of the machine tool, as long as there is a high-precision CNC machine tool, it can be processed directly.

But bearings are different. Although high-precision machine tools can also be processed, the efficiency of the processing is absolutely imaginable. At the same time, as a consumable, it is destined to buy a few in small quantities, so this time, I will not order this glass bearing for now."Xu Zhenming said.

After hearing what Xu Zhenming said, Wang Bin also nodded. Indeed, as Xu Zhenming said, other machine tool mechanical parts are easy to say. It can be processed in a short time, but there are some exceptions for bearings.

Although the bearing seems to be such a small thing, for mechanical equipment, the bearing is absolutely the top priority. The bearing alone consists of many components. If it is used in high-precision equipment, it is for the bearing itself. The accuracy requirements are very high.

It is also that the bearing itself has many components, and the accuracy requirements are not low. Therefore, if you want to use high-precision machine tools for processing, you must process these components one by one, not to mention others, only the ball bearings. Balls are absolutely timeless to process.

Of course, not all bearings are so troublesome. The rollers in roller bearings can be processed much better with CNC machine tools. But compared to processing other parts, bearings are definitely one of the most troublesome parts.

Therefore, Wang Bin also nodded and said to Xu Zhenming, "That's good! In that case, have you brought the bed and spindle data you want, Mr. Xu?"

"Bring it!" As he said, Xu Zhenming had more documents in his hands and handed them to Wang Bin!

Wang Bin took it and looked at it carefully. Wang Bin found that the machine bed data that Xu Zhenming gave him was not the data of one machine bed and bearing, but three sets of machine bed and spindle. data of.

The beds of these three sets of machine tools look a bit the same on the outside, but in fact they are not the case. The size and weight of these three sets of machine tools are different.

The smallest set of machine tools, the weight of the entire bed is only 1.1 tons, and the maximum length and width are only 1500 mm by 1000 mm. Wang Bin believes that when this machine is manufactured in the future, its weight should not exceed 3 tons. The maximum length will never exceed 1.5 meters, so this should be a small machine tool or a micro machine bed.

The weight and size of the second set are much larger, not to mention the weight of the bed of the other machine tools, it has reached three tons, you must know that this is special glass!If cast iron is used, the weight of the machine bed will definitely exceed ten tons. Secondly, the maximum length, width and height of the machine bed are 3530 mm by 3000 mm by 2890 mm. There is no doubt that this machine should be a medium-sized machine. Or the bed of an ordinary machine tool.

And the last machine bed and spindle are undoubtedly those of heavy or large machine tools.