Chaoshen Technology Trading Mall

For things happening inside the plant, Wang Bin naturally didn't know. After all, as their company TG-WSX2 engine passed the audit, the entire Tiangong Technology has put the center in the trial system of this engine. And verified.

At the same time, Wang Bin did not give up the continued development of the TG-002 vortex engine, and there was a new eddy jet engine to develop research and development.

However, with the previous differences, the previous two eddy spouts were only about 60 cents, and the diameter of this vortex engine in the newly developed vortex engine reached 1.2 meters.

And this time they want to design will no longer be a medium-sized vortex engine, but the equipment is equipped with a large vortex engine, that is, the engine's tail spray port diameter reaches one meter engine.

After all, they will create a large plane in the future, that is, the phoenix plane, then in addition to using the turntable engine, it is now the test case, which is the TG-WSX2 type engine, they must also have to Develop a vortex spray.

However, although they have a TG-001 engine and TG-002 vortex engine, since these vortex engines are only a medium-sized vortex engine, the thrust of these engines is still inadequate if they are mounted to large aircraft. .

Therefore, if the large airplane of Tiangong Technology wants to reach or exceeds the three Mach standard, then no need to use a large vortex engine, of course, if you can use a large stamping engine, then better, after all, Compared to the vortex engine, the performance of the stamping engine is higher than the performance of the high-altitude.

But unfortunately, now they have launched R & D work in terms of stamping engines, but since Wang Bin did not provide any technology because of the research and development of stamping engines, they did not study it until now. A qualified stamping engine.

At the same time, in terms of research and development of stamping engines, the research and development enthusiasm of poke professors at this time is not high. After all, their Tiangong Technology has now developed a vortex engine, and its performance is also very good, even high-altitude high-speed. Compared to stamping engines, it is not bad, while in terms of economic benefits, the stamping engine is far from comparable to the vortex engine they develop.

So their research and development is naturally not high.

At the same time, there is also a most important reason, that is, Tiangong Technology is now in addition to being preparing to develop more power, and the diameter of the spout is larger.

Tiangong Technology's aerospace engine laboratory, at this time, it is developing high-speed high-speed performance than a stamping engine, and in terms of research and development progress, considerable results have also been developed. Pulse engine, its maximum axis diameter has reached a degree of twenty centimeters, and in terms of thrust, it has also reached around ten tons.

It is because the research and development of the pulse engine has achieved considerable results, and the research and development of Tiangong Technology is not active. After all, these R & D staff can be very busy, and there is no extra time to develop stamping engines. .

Of course, this does not mean that they have no strength to develop stamping engines, after all, compared to structural and complex turntiles and vortex engines, the developmental difficulty of stamping engine is much lower, and the development of stamping engine is the most difficult. The problem is actually like the pulse engine, is on high temperature resistance.

Even the requirements for the pulse engine in the requirements of material performance, it is natural that they can also develop a stamping engine for material performance requirements, since their Tiangong Technology can develop a pulse engine.

In fact, don't say that R & D personnel, in fact, take Wang Bin himself, it is not very interesting for the research and development of stamping engines, after all, compared to stamping engines, the research and development of pulse engine is more difficult, but The future use and the R & D potential are absolutely not a stamped engine.

Therefore, it is the most important to develop available pulse engines for Tiangong Technology.

...................

Tiangong Technology's Tiantong Shipyard, at this time, after Tiantong Technology took over, the first self-developed brand new power ship was finally prepared for so long after she was built so long.

Yes, this new power of ships is the electric ship propulsion, and this full-electric ship is not a general civilian ship, but a police ship, which is the sea police ship.

Although the tonnage of this sea police ship is not large, only one thousand three hundred tons of the district are not long, the construction cycle is not long, only less than one year of the district, but for the first time to build a total electricity Ship's Tiemong Ships, built this sea police ship, but spent a lot of mind.

Of course, since it is the first time to build a full-electric ship, naturally encounter a small problem in the process of construction, but these problems encountered in the construction process, eventually being constructed by the shipyard and The ship's designer gives one by one.

Of course, like the official experiment of all-power promotion techniques, Wang Bin used by Wang Bin, the ship used by the shipyards, is also more advanced than the medium pressure exchange. After all, this ship is official ship. , The standards used naturally, but also to be just like officials.

At this point, next to the ship's shipbathing platform that will be underwater, the person in charge of this shipyard and the workers of the shipyard are anxiously waiting. After all, the time to wear the water is not enough. One hour.

But as a boss of Tiangong Technology, Wang Bin has not come yet.

It is to know that in a few days ago, this ship has been manufactured and has notified Wang Bin, who has notified Tiangong Technology, and in the process of notifying Wang Bin, the person in charge of this shipyard, also personally and Wang Bin Said, as the boss of this shipyard, when the first new power of the shipyard, I hope that Wang Bin will be able to participate.

At the same time, after he and Wang Bin said this, as a boss of Tiangong Technology, Wang Bin also agreed to come to participate in the following water ceremony.

Of course, they have a natural ship industry, this new recommended system sea police ship's water, not only Wang Bin and the shipyard of their shipyards, in addition to Wang Bin himself and the shipyard, they also invited. The relevant departments of the city and the provincial police, and hope that they can send people to participate in the sewer ceremony.

At the same time, it also notifies the official leadership of the city, and invited them, I hope they can come to participate in the sewer ceremony, and these people who are notified and invited by them, this is basically coming.