Chaoshen Technology Trading Mall

In fact, due to the success of Tiangong Technology, the aircraft electric engine is developed, and the domestic enterprises are sold, so for the aircraft of civilian electric passenger models, there is already a large number of research and development.

In these enterprises, there are also enterprises to find the idea of ​​developing the turning wheel machine, and even the company's products, now have completed the design phase, and entered the actual manufacturing phase.

However, due to the technical capabilities of these companies, they cannot be compared with Tiangong Technology and other official enterprises, so these businesses are small, and their size is relatively small, and it is for technical difficulties and security. , The selected tilting rotor is also a multi-rotator above four rotations.

Compared to the twin-rotor, the four-rotor or more rotor, the special eighth-rotor, the safety is much higher, and the possibility of out of control is much smaller. After all, these companies have limited technical capabilities.

Of course, in addition to these private enterprises, official enterprises naturally launched research and development work on tilting rotor, but the officially developed rotor machine, the size of its size is similar to the size of the Owl's tilting rotor. .

This is different from Tiangong Technology, and does not say other, just in terms of aircraft size, it is absolutely not the rotor unit of these companies.

After all, the size of this plane is made in accordance with the size of the Phoenix -1 type aircraft, so dozens of meters long tilt rotor, its technical difficulty, is a current Tiantong Technology, which is also very difficult.

Of course, maybe for many people, for the research and development of this large tilting rotor, there is no benefit for the current Tiangong Technology, after all, the technical difficulty of large-scale tilting rotors is so high, research and development The cost of the need is very high.

However, Wang Bin and Tiangong Science and Technology Aerospace Laboratory did not think so, first of all, if there is a large-scale vertical and landing aircraft, then these aircraft have huge uses in many ways, especially in rescue disaster relief. This is even more.

In addition, the reason why Tiangong Technology will carry out the research and development of such aircraft, in fact, there is a self-consideration, which is the feasibility of verifying the vertical lifting technology of large aircraft.

To know, like a Phoenix-KT1 type plane, as an air plane, it is destined to be between the land and near the track, this plane will also take a variety of flight tasks in the skyline space, That is, the transportation between the various space-wide spacecraft, in addition to this, this plane will also be used as spacecraft transportation between the moon and the moon rail spacecraft.

But the landing of the moon can be different from the earth landing, on the moon, there is no atmosphere, so on the moon, the aircraft's wing is not used at all, and even because there is a wing, leading to the landing More demanding conditions.

So, the air plane, if you want to land on the moon, then you can only achieve the engine on a plane.

However, this has brought new questions, that is, when the plane landed in the moon, he could never fell to the landing, if you still say it during the landing process.

But if it is on the land, the end of the machine is still in the first place, and then its danger knows.

Therefore, it is undoubtedly the best way at this time.

To this end, in fact, Tiangong Technology has long been launched, and the exploration and research and development of large-scale flying control vertical lifting technology, and has also achieved very great results.

However, when the relevant laboratories, the vertical lifting techniques of large aircraft are developed, but they can verify that they can verify.

After all, the difference in vertical take-off and ordinary aircraft is too big, and this technology is on the ordinary large aircraft. It is not necessarily used in the Phoenix series.

In the end, Wang Bin did they decided to develop a Phoenix's improvement version that specifically used to verify this technology within the atmosphere.

If the verification is successful, then next, Tiangong Technology will replace the electric scroll engines on the plane, replace the pulse burst of the rocket engine, verify.

In the end, if it is successful, when you really want to go to the moon, Wang Bin can fully develop, can be used for the Volleyophony of the Phoenix-1 series of the moon to log in.

It is based on so many factors. Wang Bin will cost such a big strength to develop this vertical drop-down Phoenix-CZ1 aircraft.

Now, this technical verification machine, its drawings design, now there is almost the same, only the final drawings verification phase.

"Total Wang! Our Phoenix-ZC1 vertical take-off and landing plane, its drawing design part, now it is almost the same, the design of all parts of the aircraft has been completed, can you let the workshop began to do parts? Trial system? "Professor of the aircraft design department asked Wang Bin.

In fact, today Wang Bin comes to the most important purpose to review the design drawings of this plane and look for some of the aircraft's defects.

However, today's Tiangong Technology is naturally designed to design aircraft in the previous time, it is naturally the designer of the design department. Secondly, in the design process, there is a design process. Super computer and intelligent system assistant, in the aircraft design process, there are countless computer simulations, so even if Wang Bin's mind, there are countless aircraft design, and can't find this plane design defect. .

Therefore, after Wang Bin reviewed the drawings of this plane, Professor Dai said to Wang Bin.

"You can start the manufacture of components," Professor Dai, you see, this does not work, since we started production, then we have more prototypes, "Listen to Professor Dai, Wang Bin nodded .

"Yes! This time is flying in the future, it can be quick." After finishing, he thought about it again: "Just produce five pieces! After all, if there is too much to produce too much!"

"Yes!" Wang Bin nodded.

Immediately, Wang Bin took advantage of his authority in the company's smart computer, distributing various parts of the drawings in the drawings, as for the parts and equipment produced by Non-Tiangong Technology, Wang Bin also put these components Allocated to the Purchasing Department, let the Purchasing Department go and related organizer purchases.

At the same time, after Wang Bin puts these parts production, it is automatically added to the production directory in the precision processing workshop, countless intelligent machine tools.

At the same time, the machining master of the machine has also received a reminder from the computer, allowing it to arrange the processing of these components as soon as possible.