Intelligent Industrial Empire

"Equipment numerical control is an inevitable trend in the development of China's equipment manufacturing industry. Except for those state-owned enterprises, private enterprises that research, manufacture, and sell can be said to have not. If all our equipment buys foreign second-hand equipment or simple numerical control, Not only is the cost too high, it is not conducive to our future development."

Due to the limitations of his own times, although Wang Qingfeng can predict the future of the CNC machining industry, he has no idea about the most critical CNC system for CNC machine tools.

"Oh, I said, Xiaoyun, you are a little boy, why can you know so much? When I was outside during this period, I also heard a lot. I heard from my friends that it was just two months ago. At that time, Luogang established a CNC equipment company. They mainly produce CNC systems. In the future, we can directly buy their CNC machine tools..."

"Huh? Huadu CNC? Is their name called Huadu CNC Equipment Co., Ltd.?" Wang Qingfeng's words reminded Yun Fei that in his own time he had a three-part world with RB Farak and German Siemens, occupying half of the domestic CNC system. the company.

However, although it is in a tripartite position with Farak and Siemens, the market share of Huadu CNC is all accumulated by the number of low-end systems.High-end CNC systems are monopolized by foreign companies. When others sell high-end systems, Huadu CNC has to sell hundreds or even thousands.

There is no localized high-end system, which is the eternal pain in the hearts of all Chinese robots!Especially those senior technicians who use all English systems, how can they be happy!Why does the country start late and its foundation is weak?You know, in the mid-1990s, there was no mechatronics profession.

You know, the main problem of CNC systems is to combine both mechanical and electronic.There are a lot of mechanical talents, but there are few electronic talents with lanterns. Even if there are, they are not enough for state-owned factories. Where can private enterprises find these electronic engineers?

"Yes, but now there are only more than 20 people. It's not as good as our company. I originally planned to visit their company some time later and order a few CNC machine tools if appropriate." Wang Qingfeng was a little curious, Yun Fei A little kid, originally in Shenzhen, how did he know such a small company?

Upon hearing Wang Qingfeng's words, Yun Fei couldn't help but remember the information about the company he knew.

Although Huadu CNC has a lot of registered capital, it is now only a small district-run factory with more than 20 people. The CNC system produced is also imitating foreign systems.However, although there are few people, the output value is not lower than that of Qingfeng Machinery Factory. You know, this year, a set of numerical control system cost 20,000 to 30,000, which is not much different from that of an ordinary machine tool industry.

"Pharaoh, let's also engage in CNC systems? How about?" Thinking of the prospects of the CNC industry and the future market in China, such a big pie, if you don't rush to bite, it will be hard to dispel your hatred.

If you don't eat this cake, at least most of the profits of the CNC industry will be earned by foreigners in at least ten years.

"Forget it, brother, let's do the processing steadily. By the way, brother, didn't you ask me to talk about the management of our factory? Anyway, it's off work now, let's go to the next shop While drinking and chatting, I called all the people in charge in the factory." Wang Qingfeng hurriedly changed the subject after hearing Yun Fei's request to invest in CNC.

In recent years, many people want to engage in CNC in China, most of them have lost their money, or opened a small factory to imitate the lowest-end system of the Germans or RB people.

It is the small factory just built in Luogang. I heard that it has invested millions of dollars.NND, millions of dollars can buy hundreds of ordinary machine tools, if the business is full, it will cost hundreds of thousands a month.In case the numerical control system can't come out, it will be lost, and there is no room for turning over.

Although he has seen Yunfei's mechanical processing technology and is very skilled in operating CNC machine tools, Wang Qingfeng does not think that Yunfei can get the CNC system back.No matter how talented Yun Fei is, his age is here after all. If such a hairy boy has developed a CNC system, how can it be so embarrassing for those engineers who have been working for several years without knowing the direction!

Originally, he just said casually. Hearing Wang Qingfeng's answer, and seeing his reaction again, Yun Fei felt uncomfortable.Think about it carefully, this is also human nature.I have not been in contact with Wang Qingfeng for even a month. On the surface, he trusts him. If he is allowed to put all his wealth on a 16-year-old young man like himself, no one will be such a fool. .

After all, his current body seems to be only sixteen years old, although he can believe that he is an engineer who has studied mechatronics in later generations?

Yunfei is still very familiar with the more commonly used CNC systems in the country. If the Farrak and Siemens systems ten years later are made out, they can fully occupy the high-end market of this era.

Since Wang Qingfeng was unwilling to do this, it seemed that he could only wait for the opportunity, and went out to do it alone after he had the money.

When thinking of money, Yun Fei thought of the first CNC system developed by Huadu CNC-HSK928. He had a thorough understanding of this system when he was in school.There are heavy falak traces, but compared to the falak traces of the various series of KND products launched in the Capital Third Institute of Mechanical and Electrical Research, it can also be regarded as a localized product.In this era, it's pretty good.

Due to the limitation of industrial control chip, although HSK928 system has small storage space (24k, 100 programs), slow moving speed (fast movement 15000mmmin, straight line 6000mmmin, arc 3000mmmin), no macro program function, no thread gap compensation, subroutine call With little or no electronic gear function, the screw rod, driver, encoder and even the machine tool structure are all limited by the system. Its low price (a set of only needs more than 10,000, less than 20,000) is almost equal to the domestic CNC system on the market. For a blank China, it is still a very good system, at least, it can meet the processing of some more complex parts.

The most criticized HSK928 system is not that the system itself has many defects, but that it uses stepper motors instead of later servo motors.

Anyway, HSK928 will not be successfully developed until August next year, so Yun Fei is not in a hurry.Wait for this period of time to straighten out Qingfeng Machinery’s affairs and take a trip to Luogang. If you can acquire shares of Guangshu with the technology you have at your disposal, it is ideal. But even if you can’t, you must use this system to get yourself. Initial funding.

In the evening, Wang Qingfeng took the leaders of several departments in the factory and sat at a large table in a small restaurant next to the factory.To be honest, it was the first time Yun Fei had been to Qingfeng Machinery to have dinner with the leadership of the entire factory.

He himself is a person who is not good at socializing, and he also knows that although eating and drinking are more serious these years, he is still relatively simple inside the factory.Wang Qingfeng, who was working alone in Guangzhou, usually dealt with it in the cafeteria like the workers.

Although Yun Fei is not good at socializing, he still has a good amount of alcohol. After a few glasses of beer, he can praise the heads of various departments.However, as long as he mentions the company's management, not only the heads of the various departments are unwilling to mention it, but even Wang Qingfeng is unwilling to talk about this.

This drink made Yun Fei depressed.I was in a bad mood. After a while, I was a little dizzy. After apologizing to the people who were excited, I left the small restaurant and wanted to take a walk outside.