Intelligent Industrial Empire

Since Yunfei arranged Ye Beichun in the CNC workshop, his whole body and mind began to devote himself to Qingfeng Machinery’s independent product design and development. There was very little time to visit the CNC workshop for two consecutive weeks. Even if it arrived, it was only to arrange things for Yang Guang left, and at most he asked Ye Beichun if he could adapt to the environment.

Although Xiaobaicai feels extremely uncomfortable, she is extremely dissatisfied with this deputy factory manager who has a good impression but is not familiar with. For the high salary of apprentices of two hundred and forty yuan per month, she can only follow Yang Guang to learn from the processing center. operating.

Although his grades in school were not top, it was not bad either. For the dozens of English buttons on the control panel of the machining center and some software in the PLC, Ye Beichun learned a lot faster than other workers.But Yang Guang felt that it was not necessary for these apprentices to understand the operation of the machine tool, the programming of the program, and the operating principle of the entire machine tool, so there was no explanation.

Several machining center apprentices who had high hopes from Yunfei, under the leadership of Yang Guang, were doing mechanical exercises every day, learning the programming of the machining center with great difficulty.

Although the entire CNC workshop is extremely busy, there are many rests on Sundays every week.

Chen Jie is in love, so she disappears every Saturday night.Ye Beichun, who just came to Qingfeng Machinery, has no familiar people in this factory except Yun Fei.I was expecting Yun Fei to play with him on weekends, but at the weekend I couldn't even see Yun Fei's shadow.

Ye Beichun used to have little communication with the sisters in the same bedroom in the Swift Garment Factory, and there were no friends in the whole factory, especially after his sister Ye Wuqiu went back to school, she was even more lonely.There are no weekends in the Swift Garment Factory. They work for more than twelve hours a day. After get off work every day, they are tired like a dead dog. Sometimes they go to the dormitory and lie in bed without washing.

At that time, Ye Beichun didn't think the weekend was so scary.

When I arrived at Qingfeng Machinery, on the first weekend off, apart from returning to the original Swift Garment Factory to bring all my belongings back, I just went shopping outside.But by the second weekend, the feeling of loneliness became very obvious.Chen Jie went on a date with her boyfriend, and she was the only one left in the more than ten square meter dormitory. In this era of working with few TVs, no Internet, and no entertainment, she can only start from opening her eyes in the morning, hoping It's dark, and I look forward to going to work the next day.It's not that she never thought of going out to pass the time.At this time, the industrial zone was far from the prosperous future generations. In order to save all the money to send home, Ye Beichun had to stay alone in the dormitory by herself, waiting for dark, and then waiting for the next day to work.

Because Yunfei personally led Ye Beichun to the workshop, under Zhang Rui's intentional or unintentional instructions, the few female workers in the entire factory kept a distance from her.The single young people in the factory, because of Yun Fei's relationship, also dare not approach this beautiful girl who can be regarded as a flower of Qingfeng Machinery Factory.To be precise, because of Yun Fei's relationship, Ye Beichun was isolated by most of Qingfeng Machinery.

Yunfei is also not welcomed by the young people of Qingfeng Machinery Factory, but he is using his spare time to copy the CNC system of later generations to the most critical place, so he does not feel lonely or lonely.

When Ye Beichun stayed alone in the dormitory, she hoped that Yun Fei, a boy she was not very familiar with, would appear in front of her.Unfortunately, Yunfei didn't show up on the first weekend. By the second weekend, Yunfei still didn't show up. He asked Yang Guang, the director of the CNC workshop. Yang Guang didn't know why Yunfei rarely visited the workshop during this period.

A workshop director has no right to manage what the deputy director does every day.

Although Qingfeng Machinery has a lot of CNC machine tools, the number of CNC equipment alone has exceeded three million.This shows that Wang Qingfeng attaches great importance to the CNC machining industry. You must know that the combined price of dozens of other ordinary metal cutting equipment in the entire factory is just over 2 million.

Especially not long ago, Qingfeng Machinery bought a brand new processing center from FADAL company through Kmart, which cost more than 600,000 yuan!In future generations, the model purchased by Qingfeng Machinery is not enough, especially in foreign machinery powerhouses, this type of machining center is just the top CNC machine tool.In this era, the CNC machining industry on the land of China is already a relatively high-end machine tool.

In Qingfeng Machinery's CNC workshop, most of them cannot work independently except for the first batch of people who learned CNC machine tools from Yunfei.Those people are familiar with the programming and operation of CNC lathes and milling machines.

The current Qingfeng Machinery CNC workshop has gradually begun to develop in the direction that Yunfei expected.Common precision requirements and simple part structure drawings are all programmed by skilled operators; while the accuracy is higher (tolerance range is within 0.05mm), and the structure is more complex (for example, with several geometric tolerances, curved surfaces need to be A large number of Boolean operations and other parts are complicated by Yang Guang and Wu Zhongda. If they can't figure it out, of course Yun Fei will have to do it himself.

Yang Guang and Wu Zhong have had time to reach Qingfeng Machinery. Following Yunfei, they have done a lot of high-precision and complex machining parts. Now there is no big problem with these parts that require particularly high craftsmanship and tools.Comparing that the two were once senior technicians, the only disadvantage is that they are not very extensive in the use of CNC machine tools, and they lack experience.

In Qingfeng Machinery's CNC workshop, most of the people are apprentices.But so far, only Ye Beichun, who Yunfei brought over, has been studying the machining center alone.

In this era of China, 100% of CNC machine tools are imported. If you basically have to find foreigners for repairs except for problems, not only the parts are expensive, but the price of repair and maintenance is even more heartbreaking.If the apprentice accidentally hits the knife because of a mistake in operation, the spindle will be damaged by at least tens of thousands!

Therefore, this processing center from the United States can be used by Yang Guang, Wu Zhongda and Yun Fei.Of course, after Yunfei taught Yang Guang and Wu Zhongda, he almost stopped doing this.

Machining centers, especially three-axis machining centers, cannot be regarded as true machining centers in a strict sense.It is a CNC milling machine with a tool magazine.The real machining center must be more than four-axis linkage.In this era of China, it is estimated that there will be no more than ten units in total. The price of one unit is at least the price of ten three-axis machining centers.

Whether there is a tool magazine, whether the tool change is automatic or manual, this is the only difference between a machining center and a CNC milling machine.

But precisely because of the automatic tool change function, the price of the machining center is almost two-fifths more expensive than the ordinary CNC milling machine.After all, many special-shaped workpieces or high-precision and complex parts cannot be guaranteed by manual tool change of a CNC milling machine.

What Ye Beichun did was to guard the automatic machine tool after Yang Guang compiled the program, finished debugging, and performed trial cutting.If there is a situation such as a broken tool during processing, Ye Beichun only needs to take a photo of the red "emergency stop" knob, and then ask Yang Guang to deal with it.

It has been twenty days since entering Qingfeng Machinery. Ye Beichun has done nothing except pressing the green start button several times.No matter what parts Yang Guang does, he will explain to Ye Beichun in detail.Optical theory, without practice, Ye Beichun was extremely depressed.

It's not that Yang Guang didn't let Ye Beichun learn, but that the price of this device was indeed too high!More than 600,000 yuan, with Yang Guang’s current salary of 251 months, it would take more than 20 years to afford it without eating or drinking.So he didn't dare to let Ye Beichun, who didn't know anything, operate this sky-high-priced machine tool. After all, he was careful and careful when he did it himself, for fear that he might accidentally make a mistake and damage the machine.

Ye Beichun guards the processing center at work every day, but can only guard it boredly.At the age of only sixteen or seventeen, how can he repeat this kind of work mechanically every day and keep his passion?Therefore, she felt that she had been fooled by Yunfei, deceived by that stinky rascal Yunfei, and wanted to make time to ask Yunfei to give herself an explanation.

The purpose of her coming to work at Qingfeng Machinery is not only to need Qingfeng Machinery, who is twice her salary, but also to learn first-hand skills!

I have spent so many days in the CNC workshop. After knowing those CNC lathes and CNC milling apprentices for more than 20 days, they can perform some simple machine operations on the machine by themselves. At least set some machine tool processing parameters and modify the tool offset.

But Ye Beichun hasn't done the simplest installation and removal of the knife during this period of time; for the straightening of the workpiece, Zhao Zheng and the simplest basic operations of the knife setting have never been done.

Tomorrow is Sunday again, Qingfeng Machinery will not go to work.So Ye Beichun rushed to Yunfei's office after get off work. Although the relationship between the two was not so familiar, at least, she was Yunfei who received Qingfeng Machinery, and Yunfei was responsible for her.It was precisely because of this thought that she mustered the courage to go to Yunfei to give herself an explanation when she was about to get bored.

Qingfeng Machinery is gradually becoming more formal, so every Saturday afternoon, before leaving get off work, all departments of the entire factory will gather for a meeting to summarize and discuss the various situations of the week, so that Yunfei and factory director Wang Qingfeng will be the two A person in charge has a more detailed understanding of the factory.

On the weekends of the previous two weeks, because Ye Beichun was not familiar with Qingfeng Machinery's situation, Ye Beichun had not found Yunfei several times after get off work, and there was no one in his dormitory.

Today, she was waiting for him directly in Yunfei's office.