Intelligent Industrial Empire

"If you can successfully install a rotary table on a three-axis machining center with high precision, then it will become a four-axis machining center? Xiaoyun, are you sure?" Ren Zhiguo heard the cloud If it is not, the original frown frowned, but frowned even tighter.

The problem of the three-axis linkage of machining centers has plagued the CNC machine tool industry throughout the continent. Countless people have tried to solve it and have worked for many years. However, until now, few companies with three-axis can successfully solve this problem.Not only did China start more than 20 years later than foreign countries, but its industrial base is also incomparable with developed countries abroad.

The most important thing is electronic control. There are few experts familiar with this field.Therefore, there are only a few CNC lathes capable of producing two-coordinates in China, and CNC milling machines with three-coordinates can barely be produced, but those equipment cannot be compared with imported machine tools.

"Who can talk about this with confidence? CNC machine tools are not ordinary machine tools, not only related to mechanical aspects, but also related to electronic aspects. The most important thing is the control chip and the processing center of the miniature electronic computer! Does our country have it? "Yun Fei also has a headache.

The theory of four-axis machining center is known to all those who engage in CNC.But if it is possible to produce high-precision precision machinery based on this theory, it will be difficult.CNC machine tools are the embodiment of a country's industrial capabilities, especially the most high-end precision CNC equipment. The machining accuracy, even if it is increased by 0.01mm, is extremely difficult.

"You kid, it's true. Just say what you need. I have to know your requirements before I can go back and tell the boss, let the boss contact the factory with these processing needs, and see if I can provide it to you." For Yun Fei's words Ren Zhiguo also agreed, but he was a little unhappy with the manner and tone of this kid when he spoke.

At any rate, you are also a native Chinese. As the saying goes, children are not ugly and dogs are not poor.Although the country is not doing well in high-precision and cutting-edge technology, at least it is not too bad, right?In comparison, the atomic bombs have been hooked out, supercomputers have been built, and many satellites have been launched. I heard that the country has plans to develop to the moon...

"Senior mechanical transmission engineers, electronic circuit engineers, hydraulics and pneumatics engineers. The most important ones are electronic circuit engineers. In addition, we must get people who have research on small motors. If you can equip them, we will You can start to study the rotary table. That is, add a standard PMC axis drive module to the table of the three-axis machining center to implement the fourth-axis function. In this way, not only your four-axis machining center orders can be resolved. The same type of work would not be a problem.” Yun Fei’s answer is a bit professional, which makes Wang Qingfeng and Ren Zhiguo feel a little bit of a bible.

Neither Wang Qingfeng nor Ren Zhiguo knew anything about CNC machining machines, especially high-end machine tools. They were always curious about where Yun Fei, a child like this, learned so much.

Yun Fei’s words are too professional. Although Ren Zhiguo can’t understand him, he doesn’t understand what is called PMC axis drive module. He can still know what motor is. But for Yun Fei’s words that are too professional, he still insists on remembering. Go down.Anyway, just go back and talk to the boss like this. When the time comes, let the boss go to communicate with people in the military. Whether or not to provide Yunfei with people in this area, I can't control this.

This time it was very rewarding. Not only did the boss give him an excellent job, but it also secured the orders for the four multi-million dollar four-axis machining centers.

Ren Zhiguo was satisfied with this business, but Wang Qingfeng was struggling.Seeing Ren Zhiguo leaving Qingfeng Machinery happily, Ren Zhiguo didn't even give it away.

"Xiaoyun, you said, if we don’t take the orders from Kmart, what will happen to our factory?" I don’t know how many cigarettes I smoked. The whole floor is full of cigarette butts. The sky outside is almost dark. People have been talking about things in the office, and Luo Xiaoli can wait outside boringly.

"I said, Lao Wang, are you stupid or something? Many people can't ask for the order from Kmart. Do you still want to refuse? I know what you are worried about. Don't worry, although foreign trade processing The profit of orders is very high, but this era of huge profits is coming to an end.” Yun Fei was amused by Wang Qingfeng’s concerns.

During this period of time, Qingfeng Machinery has developed extremely fast with its foreign trade processing business. However, as imported CNC machine tools are becoming more and more in the mainland market, and more and more foreign CNC manufacturers are establishing assembly plants in the mainland. It won't be long before the violent era of CNC machining will end.

In the world of Yunfei, CNC machining is not as profitable as general machining.For most processing businesses, the gross profit margin can reach 30%, and the owner of the factory will think it is more ideal; reaching 50% is the huge profits of that era; as for double, double, or even several times, the profiteering business is not without , But for that kind of business, don't count on factories that are not strong enough.

The more precise and complex the business, the more profitable it is.Because most people can't do that kind of work. Another thing is that the more precise the job, the higher the equipment cost.At the time of Yunfei’s original era, when five-axis machining centers were more common in the mainland, the price of an imported German ordinary five-axis machining center was usually more than RMB 5 million, a large gantry-type five-axis machining center. The price is more than 15 million yuan!

There are millions of pieces of equipment at every turn, and there is no machinery factory with strong strength and stable business sources, so they can only be tempted by these equipment.Although I am jealous of those high-profit businesses, I don't have the courage to spend millions or even tens of millions to buy a five-axis machining center.

The stainless steel parts business that Qingfeng Machinery relied on could have thousands of dollars in processing fees in later generations, but the thousands of dollars in that era could not be compared with the 1,000 dollars in this era.You know, in this era, ten thousand households can be regarded as rich, and twenty years later, tens of millions will not be regarded as rich, and hundreds of millions of people can only be regarded as average.After all, a house in any second-tier city can cost millions.

It is because of knowing the development of the entire processing industry that Yunfei didn't feel any difference in what Kmart had done.Compared with the domestic military, in this era when everything is centered on economic development, it can be considered a poor man.There is only a small amount of military expenditures each year, but they have to be allocated to various systems. Therefore, those living processing costs are much worse than foreign trade.

However, when the competition in the entire industry becomes fiercer and fiercer in the future, many factories in the military have begun "civilization to military" and "military to civilian", and which machine factory can have long-term stable military business? Didn't you make a lot of money?

The reason why the current foreign trade processing orders have such high processing profits is mainly because foreign machine tool factories want to use low-end CNC machine tools to open up the Chinese mainland market.As long as many people in China see that the CNC machining business has such high profits, those who do everything possible to become rich first, even if they tear down their houses and sell tiles, they have to buy hundreds of thousands of CNC machine tools.

After many people had bought CNC machine tools, they realized that there were only so many foreigners in mainland China.If you want to get the order, yes, as long as your price is lower than that of other factories, I will give it to you.

As a result, many people finally find helplessly that the profits of the CNC machining industry are getting lower and lower, and more and more people are buying equipment.In the end, if you want to make money, you can only use quantity to overwhelm your competitors. Therefore, low-end machine tools from foreign CNC machine tool manufacturers flood the Chinese market again in large quantities.

It is precisely because of the inadequate production of CNC machine tools in mainland China that foreigners' machine tools have the opportunity to monopolize the Chinese market. This situation has continued until Guangshu, Central China, Capital Institute of Mechanical and Electrical and most traditional general machinery manufacturers entered the CNC machine tool market. To get better.At that time, these CNC machine tool companies that competed with foreigners could only compete with foreigners' companies in the low-end and mid-range sectors.

Although the cost of domestically produced large-scale and heavy-duty CNC machine tools is much lower than that of foreign ones, the accuracy is not satisfactory.You know, these large, heavy-duty processing machine tools all process parts weighing several tons, dozens of tons, and even hundreds of tons. Not to mention the pre-processing costs of these parts, just the cost of raw materials. Tens of millions of yuan, or even tens of millions, are possible. If the entire part is scrapped because the machining accuracy of a certain place is not reached, the processing manufacturer will have to cry...

"Xiao Yun, listen to what you said, is it a good thing for the factory to take these business?" After listening to Yunfei's analysis of the development trend of the CNC machining industry in the next few years, Wang Qingfeng asked suspiciously Yun Fei.

"Of course, in this country, it is estimated that no one knows the fierce competition in the machining industry in the future better than me. You can see the influx of more and more brands of CNC machine tools into the mainland market is an obvious example!" Yun Fei answered affirmatively. Wang Qingfeng's unhappy heart because of the lack of profits got a certain degree of improvement.

The boss should take a long-term perspective, right?

"Then let's tell Kmart Company?" Although Wang Qingfeng initially agreed to Ren Zhiguo's request, he agreed very reluctantly.At this time, I heard Yun Fei say that military production is a stable source of profits in the future, so I wanted to call Ren Zhiguo to avoid bad relations between the two in the future.

"Are you stupid? That's the best thing. This is because they took advantage of us. Let them feel that they owe us, so that we can fight for more benefits for us when we deal with them in the future?" Yun Fei The words are very real.After all, making money for military products is only a matter for the future. After all, the military behind Kmart is indeed taking advantage of Qingfeng Machinery.