Intelligent Industrial Empire

After talking to all the workers in the entire factory about the dry shares, Wang Qingfeng and Yunfei called all the managers above the team leader and above into the large conference room on the first floor of the office building to announce the development of some high-level factories.

In fact, the dynamics of the top of the factory are mainly Yunfei's whereabouts.Yunfei is the second largest shareholder of Qingfeng Machinery, but he has agreed with Wang Qingfeng and several other shareholders who each hold 5% of the shares.With regard to factory management affairs, he will not intervene anymore, only grasping the strategic direction, and after Xinkaixing's development has deviated from the preset track, he will enter again strongly.

Xinkaixing established a board of directors, with Wang Qingfeng as chairman, Yun Fei, Yang Dezhi, Zhu Yuanshan, Wu Jianguo, and Zhang Yumin as directors.

Luo Xiaoli was dismissed from the position of assistant to the deputy factory director and became the office director, responsible for the administrative affairs of the entire factory office.Chen Jie is still the manager of the personnel department, but in charge of this is just an empty corporate strategic planning office director, and Yun Fei is the director of the planning department.There is not much change in other personnel.

Under the strong request of Yun Fei, the finance department was personally assumed by Wang Qingfeng, the chairman who didn't know much about finance.

Finally, after spending constant time and effort to straighten out Xinkaixing's various things, Yunfei waited for the six CNC machining centers to be purchased by Kamath.As long as these processing centers are fully operational, Yunfei will leave Qingfeng Machinery and put his main experience on negotiations with the military.

Yun Fei currently has many positions in Xinkaixing, including a large number of titles as director, planning director, and executive CEO.However, for the shareholders of Xinkaixing, Yunfei's most critical identity is the consultant!Technical consultant, management consultant, strategic planning consultant.In other words, it doesn't matter whether Yunfei is in the company now. The important thing is that as long as there is any bad sign in the company, Yunfei, a shareholder, will move in!Yun Fei's strength will suppress all monsters and ghosts.

Huadu CNC is working overtime every day to produce the samples on the drawings given by Yunfei.They need to produce samples as soon as possible, then debug the samples and set detailed parameters for various functions.It is already the beginning of April, and there is only less than half a year before the Huadu Fair this year.

For the order transferred from Kmart, under the strong interference of Zhao Xingbang, the processing fee was given according to Yunfei's requirements, and the batch was settled.Zhao Xingbang was anxious to meet Yun Fei's again, but Yun Fei had been very busy during this time, and in desperation, he could only wait.

On this day, Ren Zhiguo ran to Xinkaixing and told Yunfei excitedly that six German machining centers had not been obtained, but four Taiwanese three-axis machining centers had been obtained, and he asked Yunfei if he wanted it.

"Which company in Taiwan produced it?" Yunfei still knows a lot about the early Taiwan CNC machine tools.Because the country was blocked by foreign technology at the time, and the demand for CNC machine tools in China was huge, many Taiwanese machinery companies saw the business opportunities in this and used the support of NATO countries to import various parts and accessories from various countries around the world. The production of three-axis machining centers that have become the most low-end equipment in Western Europe, America and Japan.However, in terms of early machine tool production, Taiwanese enterprises can be said to be patchwork.Except for the large castings on the machining center, almost all precision parts come from countries such as Japan and the United States.Not even Germany buys their account.

Taiwan's machine tool companies occupied half of the early mainland CNC machine tool market.It is precisely for this reason that Taiwan's CNC machine tool companies can obtain a large amount of research funds and start research on their own brands in the true sense.

Among them, the corporate brands of Taichung Precision Machinery, Youjia, and Xiehong are the most memorable ones for Yunfei.

Taichung Precision Machinery was considered the best manufacturer of CNC machining centers in Taiwan in the 1990s, and has always been the leader in the production of CNC machine tools in Taiwan.However, the price is also the most top, and it is not much cheaper than the imported machine tools from Europe and America.

The bones of Taiwanese are as cheap as the Japanese, and the price of selling them to the processing center of Taiwanese companies may be only half of the price of buying in mainland China!Later, as Europe, the United States and Japan gradually loosened restrictions on low-end machine tools in the mainland, Taiwan's machine tools with imprecise equipment began to cut prices.In the end, in order to reduce production costs and save the import costs of each machine tool, they began to build assembly plants in the mainland.Taichung Seiki did not make such a choice.And they are different from other Taiwanese machine tool manufacturers in that they are sold at the same price to everyone.Because their machine tool accuracy and efficiency are really good, they were very popular in the 1990s.

Taichung Precision Machinery did not choose to build a factory in mainland China due to unknown reasons. In the late 1990s, due to the lack of research funds, product upgrades could not keep up with the younger brothers who came from behind. They were gradually suppressed by Youjia and Xiehong. For many years, the enterprise is far away.

Taichung Precision Machinery arrived in the era of Yunfei, and it was almost reduced to an obsolete CNC machine tool manufacturer.

Youjia's CNC machine tools, especially after establishing an assembly factory on the edge of the West Lake, were listed in Hong Kong in 1996.Especially later in mainland China under the banner of domestic brands to compete with foreign CNC machine tools, and at the same time, all parts and accessories are imported and only assembled in China as an excuse to compete with domestic CNC machine tool companies.Although Yun Fei thinks that the processing center they produce is still easy to use, he still despises the unethical things they do.

It can be said that Taiwan's CNC machine tool manufacturers are the first to realize the peaceful reunification of the two sides of the strait in order to gain the mainland market!They successfully returned to the embrace of their motherland.

Taiwan Xiehong, Yun Fei does not know very well, but knows that the CNC equipment of this company is better than the CNC equipment produced by Youjia, and it is also much more expensive.One of Yunfei's masters was the first batch of workers trained in CNC machining centers in mainland China, and also the earliest batch of modern CNC machine tool operators in China. Yunfei's masters still have a good impression of Xiehong's machine tools.It turned out that in that world, in 9596, the aerospace system company where the master Yunfei worked, but purchased a large number of Xiehong processing centers.

"Youjia." Ren Zhiguo's words made Yun Fei take back his thoughts.

"What model? What price?" Yun Fei knew that Taiwanese machine tools at this time were not much cheaper than European and American machine tools.

"FEELERFVM1350, the price is eight hundred and eighty thousand yuan..." When it comes to this price, Ren Zhiguo has no bottom in his heart.Taiwan’s offer was 850,000, and they only added 30,000 yuan.You know, Yun Fei's price is in his mind, but 600,000 to 700,000 units!

At this price, Yunfei's original plan to purchase Liutai equipment is a bit reluctant for even five units.

"The price is a bit high. What system are they equipped with and what are the specific parameters?" Yunfei Ren Zhiguo.

"Uh... this is not very clear..." Ren Zhiguo answered Yun Fei embarrassedly.

"That's OK, you arrange it, we find a time to talk to them." Yun Fei knows, let Ren Zhiguo, who is not interested in machine tools, remember those confusing machine parameters and various professional terms.

However, in the end Yun Fei still didn't reach a conclusion with the other party.After all, this is not in line with business rules. Kmart is an intermediary. If the customers at the two ends of the chain are linked up, there will be no intermediary period.Yun Fei also understands, but he still asked Kamath to send professional personnel to communicate with him.

FVM1350, equipped with Japanese Mitsubishi system, X-axis travel 1350mm, Y-axis travel 750mm, Z-axis travel 750mm, optional disc type tool magazine or hat type tool magazine.The tool magazine has 16 tool magazines, 24 tool magazines and 32 tool magazines.For production-oriented enterprises, these types of tool magazines are completely sufficient.The biggest feature of this machine tool is that it is equipped with an automatic chip rolling device designed by Youjia.

The FVM1350 model is a bit too big for companies like Xinkaixing that produce products instead of making molds. If you buy five such machine tools, it will be too big.In the end, the other party said that there are two models of FVM800 and FVM1000, and the price will be much higher.

FVM1000, X-axis travel 1000mm, Y-axis travel 650mm, Z-axis travel 650mm; FVM800, X-axis travel 800mm, Y-axis travel 550mm, Z-axis travel 550mm.

These models have different strokes except for the X axis for lateral movement, Y axis for longitudinal movement, and Z axis for up and down movement, and the other configurations are the same.

After several back-and-forth communication among the people of Kmart, Yunfei finally decided that Xinkaixing would buy one FVM1350 with 830,000 yuan, two FVM1000 with 720,000 yuan, and three FVM800 with 650,000 yuan.After the contract is signed, the goods will arrive within one month.

Since Xinkaixing purchased a total of 4.22 million Youjia equipment, it can be regarded as the first large private customer developed by Youjia in mainland China, and the follow-up purchase of this customer will be more powerful.With this, Youjia company equipped these machines with three computers!There is also a professional programming software MASTERCAM for CNC machine tools!

For the computers of this era, Yunfei is straightforward, Pentium 100 CPU, 320KB graphics card, 3.2GB hard drive, 4MB memory, 14-inch CRT monitor!How can Yunfei, a later generation who always thinks that his wife is not domineering enough, 8GB memory is not good enough, and the 1TB hard disk is not enough to use the configuration of the eye?

However, the programming software of MASTERCAM4.3 version installed in the computer is what Yunfei values ​​most.

I have always wanted to get these professional programming software, but Camart has no way at all.There are dozens of them, and others say how many tens of thousands of a set of software.Yunfei didn't bother to bother about it, and always let the original Qingfeng Machinery use macro programs to process three-dimensional surfaces.

However, the constant variables and local variables of the macro program are painful to remember. There are also some function formulas. In many cases, the processing of complex irregular surfaces will cause headaches for many days.Because in order to compile the processing macro program of those complicated curved surfaces, mathematical modeling is necessary.