Intelligent Industrial Empire

The appearance of LSK9201, half a month after the Pearl River Daily reported it, finally appeared in the People's Daily under Yun Fei's expectation.

On June 17, 1992, a detailed report on LSK9201 appeared in China's most authoritative, largest coverage and world’s largest sales volume. This report was even more detailed than the Zhujiang Daily.Not only has it comprehensively reported the current situation of China's machinery manufacturing industry, but also the performance of China's imported CNC machine tools, which more prominently described the difficulties faced by the development of China's machine tool industry.The appearance of LSK9201 will change the pattern of China's machinery manufacturing industry, and even have a great impact on the world's machine tool manufacturing industry......

The People's Daily also pointed out that after decades of development, China's machine tool manufacturing industry has made considerable progress, but it is still far behind its foreign counterparts.The development of China's CNC machine tools requires the development of control systems and the development of machinery manufacturing technology at the same time in order to catch up with the further and further steps of foreign countries.

Regarding the emergence of Long CNC in China, the People's Daily commented: The National Economic Development Planner *** once said that science and technology are the primary productive forces and practice is the only way to test standards.The emergence of CNC machine tools is the perfect embodiment of science and technology as the first productive force.The emergence of LSK9201, whether it can withstand the proof of practice, proves that we are going further in the high-end field of machine tool intelligence, and all the domestic machinery industry personnel need to work together.

Huadu Numerical Control Gate, a wall of 1.5 meters high is built with masonry and cement in the middle. The marble on the outside is engraved with the name of Huadu Numerical Control Equipment Co., Ltd., and both sides become bright and dazzling. The stainless steel electronically controlled gates are the same kind of gates as most of Yunfei's later factories.Doing this kind of gate adds another good business to Xinkaixing.Although the principle of this thing is very simple, it is still difficult for laymen who do not understand.

When Qingfeng Machinery changed to such a gate, Wang Qingfeng's explosive household had been showing off for a long time.As a result, it has been done intermittently to many upstarts.At that time, Yunfei's main energy was put on the numerical control system and numerical control processing. In addition to the chaos of the entire Qingfeng Machinery, he had never thought of doing this business.

Yun Fei stood in the electronic remote control stainless steel fence door that had just been replaced by Huadu CNC today, smoking a cigarette while repeatedly experimenting with the opening and closing control of the door.At this time, seeing Zeng Hongqi and Qin Qingshan walking in like an enclave from the outside, they hurriedly stopped them and asked them to comment on this door with not much technological content.

"Xiaoyun, you are doing this, it is too wasteful. The door is good. Does it need to be repaired? You did it too vain. Obviously it doesn't meet the above two words of truth-seeking. More than 10,000 yuan..." Zeng Hongqi said with a pained expression on his face when he saw the newly changed door.

Qin Qingshan nodded next to Zeng Hongqi's words.Not only did Yun Fei change the original door, he actually erected a piece of marble just as high as one person where he had just entered the door, engraved with the words "Pragmatic and New".Isn't this formalism?

After Conglong CNC appeared in the People's Daily, the inquiries from major machine tool manufacturers across the country almost filled the office of Zeng Hongqi who was in charge of system sales.The heads of several factories were either busy recruiting people during this time, or receiving purchasers from major machine tool companies or machining factories.Yun Fei, the second shareholder, does not care about anything in the factory, but now leisurely fiddles with the gate of Huadu CNC.

The original Huadu was numerically controlled, and the gate was made of two iron railings.Both opening and closing require manual labor, which is very troublesome. Now Yunfei has changed it to an electronically controlled stainless steel automatic door.Qin Qingshan was very painful. The materials for this set of doors alone cost thousands of dollars. If it weren't for Huadu CNC itself, it would be a CNC system. A simple remote control device like a door would be the same.

"I said Lao Qin, we are engaged in high-end products such as CNC systems. When customers come and see that the doors of our factory are manually controlled, do you think they can believe that we have really made a higher-end system than the imported system? "Yun Fei despised the two soil buns who had never seen the world before.

When Wang Qingfeng came to Huadu CNC to ask Yunfei about some factory management issues a few days ago, he saw that the gate of Huadu CNC was actually an iron gate that was opened and closed. He despised Yunfei for at least half an hour.

Wang Qingfeng's words reminded Yun Fei.Huadu CNC is a high-tech company that manufactures CNC systems. The gate is not only dilapidated, it has no technological content, so it immediately decided to replace the gate with a remote control.Qin Qingshan and the others have been busy during this time without occupying the ground, and they are too lazy to care about Yunfei, as long as he does not tear down the factory, he will be happy.Now Qin Qingshan Zeng Hongqi and several people regret that when they signed the contract, they were secretly happy that Yun Fei did not intervene in any management affairs of the factory. Now they are all busy to death, and Yun Fei is leisurely in the entire factory alone. Sloshing inside.

Qin Qingshan and the others didn't fully understand Yun Fei, the guy who kept them deflating.If anyone complains that Yunfei is too idle, Yunfei immediately put the crumpled agreement in his trouser pocket on the page about Yunfei not interfering in the company's daily management affairs after acquiring the shares.

On June 28, 1992, Qin Qingshan and others were informed that there will be "important guests" visiting Huadu CNC in July.Several people from Qin Qingshan were excited because they guessed that it was very likely that high-ranking officials of the Pearl River Province and some important leaders of the provincial party committee came to visit the factory. Since the establishment of Huashu, except for the industrial leaders of the Huashu City Committee when it first opened. However, no leader has ever visited a small factory with no reputation.

Yun Fei looked down upon a few people with great contempt. How did they know that the person who would come to visit would be the number one figure who would make the whole land of China and even the world tremble with a stomping, and would draw a circle in the Pearl River Delta. Then change the elderly in China.

Yun Fei was equally excited. For the old man he admired and changed China’s poverty and backwardness for thousands of years, he was a fellow for two generations, and an old man who had only watched on TV when he was very young. Regarding the old man who left the world with regret, how could Yun Fei not be excited when he saw it with his own eyes this time?

The old man once went to the place where he drew the circle for the second time. He was in Huadu and only stayed for a short ten minutes!So when he got the news that the old man was about to make a southern tour, he became extremely urgent, and kept building momentum for the system he had copied.He needs the aura of the old man to shine on him, and likewise, he needs the people around the old man to vindicate his grandpa in this life.

On July 1, Wang Qingfeng called Yunfei and told Yunfei that the six Taiwan Youjia processing centers purchased by Xinkaixing through Kmart had been unloaded at Huadu Port and will be loaded and shipped to Xinkaixing tomorrow.Wang Qingfeng hopes that Yunfei will go back to check the equipment. After all, perhaps no one in Huadu knows CNC machine tools better than Yunfei.

Hearing Wang Qingfeng's words, Yun Fei's heart moved and hurriedly asked him to come to Huadu for a trip to CNC.

"Lao Wang, do you want to raise your eyebrows and let the entire Chinese know about you, so that we Xin Kaixing can become more famous?" In Yun Fei's office, Yun Fei whispered to Wang Qingfeng.

"Yes, why don't you? You said that I am a nouveau riche and I can have the opportunity to raise my eyebrows. Will I let it go?" Wang Qingfeng didn't know what Yun Fei told him to do, but Cong Yunfei closed the door and closed the window, quietly and seriously If you can feel the manner of speaking, there will be good things.

"Pull the six machining centers to Huadu CNC. Don't ask me why. I can't walk away these days. You can ask Yang Guang to bring the machining center operators with the best CNC workshop technology and the three computers. Come here..." Yun Fei instructed Wang Qingfeng.We must let the elderly see the power of CNC machine tools.

"This...what the hell is going to do? Yang Guang is here, no one is in charge of the day shift, what should I do? Also, if you drop the people from the processing center, what about the production tasks in our factory?" Wang Qingfeng didn't know what Yun had to do , Yunfei’s investment this time is a bit tough. With millions of equipment, it is not the first time that Yunfei’s factory installs and debugs to make money back. Instead, it is brought to Huadu CNC. What does he want to do?

"Pharaoh, don't ask so much about this matter. After Youjia's machining center is installed in Huadu CNC, we will bring the most difficult work of our factory to this side. Let's do it in Huadu CNC. You are yourself I also explained the things in the factory. The processing center operator only needs to be one person. What should I do and what else should I do?" Yun Fei said mysteriously to Wang Qingfeng.

After all, he was engaged in speculation in this matter, but now I don’t know if the old man will actually start his southern tour after half a year. If it is revealed, let’s not say whether the old man will visit Huadu NC again. Being put on a big hat is not worth the gain.

Qin Qingshan and others are very happy that Yunfei has brought the six processing machines Xinkaixing bought from Taiwan to Huadu CNC.Their LSK9201X1 is now refitting imported second-hand milling machines long ago. The accuracy of the ball screw and servo motor is not good, and it is impossible to effectively withdraw the control accuracy and control ability of this system.Now that we have a three-axis CNC machining center produced in Taiwan, just use one to remove the control system and install the Huashu control system, which is enough for the most complete debugging of this system.

In the test workshop of Huadu CNC, a large area was drawn, and six three-axis machining centers from Taiwan Youjia CNC were neatly placed.

Yun Feike didn’t tell the other people about his purpose, so he said that these machining centers just arrived, and Xinkaixing’s business is not very full, so we can test our own CNC system. If Xinkaixing has more business , It happens to be processed here.Only by carrying out complex processing, can the system find the faults that are not easy to find.