Intelligent Industrial Empire

After completing the assembly, fill the headstock with oil, fill the oil filling holes on the saddle with oil, and fill the guide rails with oil at the same time, the entire lathe is finished with the final assembly.

"Director, why don't you go to Xinkaixing to lend their deputy director to help us debug it?" After finishing the assembly, Zhao Bingbiao saw Yun Fei constantly circling around this one, leaving only the surrounding protective cover and The CNC lathe of the protective door keeps spinning, as if to see from the CNC lathe that has not been painted, or even scraped the bottom ash, where there are any shortcomings.

Hearing Yang Bingbiao's suggestion, Yun Fei could not help but curled his lips.

This guy, it seems that he still cannot be too low-key.This low-key, these people have forgotten even the biggest reliance on starting from scratch.

"Who of you go over there to help me close the switch!" Yun Fei said to the few people who looked at him suspiciously.

The demo, the master does not show a hand, really when the little master is a nouveau riche boss.Yunfei ignored Zhao Bingbiao and directly asked someone to close the switch. After the CNC machine tool was assembled, some necessary settings must be made to the PLC. Although most of the functions in it, Huadu CNC has completed the pre-installation and some conventional Setting of parameters.

After the CNC machine tool completes the assembly, it cannot directly start the trial cutting processing of the parts, and it must go through a period of dry running.This dry run is like a car that has just completed its assembly and goes down the assembly line, and it needs to run in.

After the power was turned on, Yunfei directly turned on the main power switch behind the machine tool in the eyes of everyone's doubts, then twisted the red emergency stop knob on the PLC operation panel, and then gently pressed the green one that started. Power button.

Soon, the originally dark palm-sized screen began to flicker, and after a while, there were segments of English programs moving quickly from bottom to top.

Seeing this situation, everyone's mouths were wide open. Who could have imagined that this young boss could even turn on CNC machine tools!

Yun Fei realized only then that he had always felt what was missing in his heart.In his factory that produces CNC machine tools, there is no machine debugger!Although the engineers in the Soviet Union did not have any problems with their designs, they only designed independent mechanical parts and independent electronic circuits. The assembly was originally made by the boss, Yunfei.

In the design of this machine tool of Jiuyi Heavy Industry, Yun Fei, the boss who no longer cares after the Soviet engineers just arrived here and threw out the assembly drawings, has been low-key to make people forget what he does.

"Qin Qingshan, an old thing, wanted to wait to see Lao Tzu's jokes. He knew that Xiaoye was going to produce CNC machine tools and send the CNC system here, but he didn't arrange for debugging personnel!" Yun Fei scolded harshly in his heart. Looking at Qin Qingshan, the old guy who looks incredibly kind on the surface and dark in his heart.

The office of the chairman of the board of directors is hung on the Huadu CNC. The two signs in the office of the general manager are being pressured by orders from snow flakes. Qin Qingshan suddenly sneezes, and his left ear instantly turns red. It must be hot.

"Is someone scolding me? Yes, too many people have been offended. It seems that Yunfei has to be notified to come here to hold a shareholder meeting. We are still taking too small a step towards NC expansion in Huadu..." Qin Qingshan shook his head, ready to take a look inside the workshop.

Since the launch of Long CNC, Qin Qingshan has not had a good night's sleep. In many cases, purchasers from machine tool factories across the country would even knock on the door of his Huadu CNC general manager in the middle of the night.Qin Qingshan is convinced that Yunfei's customers are God's creed. Facing God for not letting him sleep well, he has no temper at all. He only blames Yunfei for the system that this kid brought out is too powerful.

I only hate that there are too few workers in Huadu CNC!Those hundreds of workers who have been trained for half a year are already competent enough for their jobs. A hundred sets of CNC systems are born in Huadu CNC every day, but there is no way to deal with the orders that flew in like snow flakes.

The executive vice president in charge of the business, Zeng Hongqi, asked every day to expand the scale of the factory and recruit new workers. Qin Qingshan also strongly agreed, but was rejected by Yunfei, the second largest shareholder.In desperation, Qin Qingshan, Zeng Hongqi and others had no choice but to hide from Tibet every day. They didn't even dare to go out of the factory door. Once they went out, they would be surrounded by purchasers from machine tool manufacturing factories waving banknotes in their hands...

Yun Fei didn't know, but he blamed Qin Qingshan.

Although the system was produced by Huadu CNC, this system was taken out of Yunfei.Especially afterwards, many ladder programs and parameters in the system were created by Yunfei.

Since even the most core ladder program of the entire system can be compiled without thinking, the parameter settings are more proficient than those old guys who have been playing CNC for decades. Zeng Hongqi, who is in charge of the business, is basically when arranging people to deliver goods to Yunfei. I never thought that no one in Yunfei's hands would debug the refitted CNC machine tools.

Originally, the number of staff was tense. If two or three people were sent to Chengdu on a business trip and did not know when the commissioning task would be completed, not to mention that Zeng Hongqi, the vice president of business who has been asking for the expansion of the factory, disagrees. Qin Qingshan, who is upgrading the Long CNC system and developing the new system, disagrees.

Yunfei went to build a factory in Rongcheng, or a machine manufacturing factory for machine tool production. When he wanted the CNC system, the factory hadn't started yet. Who knows when he can complete the production of the first CNC lathe?Most of the machine debuggers who debug the Long CNC system in Huashu are trained by Yunfei at the beginning. They don't think that Yunfei can't debug.If Yunfei focuses on the production of CNC machine tools in the future, it is impossible for him not to train his own machine tool debuggers.

Set some parameters reserved for machine tool manufacturers, such as the machine origin setting of machine tools, etc.; expand some functions that are not commonly used in ordinary CNC lathes, such as the thread of the end face. It is estimated that even Huadu CNC people now I don’t know, Long CNC can actually process end-face threads.Under the stunned gaze of everyone, Yun Fei quickly pressed his finger on the operation panel.

With the rapid movement of Yunfei's finger, the small cursor on the display screen above the blank operation panel keeps moving backwards and downwards. Every time it moves, a letter or a number will appear on the screen. Within a few clicks, the screen was filled with programs.

Most of the onlookers didn't know that the screen was full of letters and numbers, and they didn't know what Yun Fei did.They are great experts in the production and assembly of machine tools, but they are especially unfamiliar with CNC machine tools!

"Okay!" Yun Fei let out a long sigh, shaking the back of his hand, which was slightly sour for a long time, and said to the crowd onlookers.

"That's all right? I'll find a rough piece and try some turning tools..." Yang Bingbiao didn't even know what Yun Fei did for the things they didn't understand, so he did it twice. , Can this machine start processing parts?

"..." Yun Fei was speechless.

After explaining for a long time, it made the puzzled people understand that this is only the completion of some basic parameter settings of the machine tool and the compilation of the running program. Now the machine tool can run, but it is only a running CNC system. The simplest operation for machine tools.

Yun Fei lightly pressed the green button once, and the first CNC lathe of Jiuyi Heavy Industry did not have a spindle equipped with a mechanical chuck, so it turned slowly under the gaze of everyone.At the same time, the saddle on the guide rail starts to move quickly back and forth along the guide rail, and the middle pallet also moves back and forth continuously.

While observing the movement of the tool post, Yun Fei began to explain to the main force of later assembly the necessity of debugging after the CNC machine tool was assembled.

Because he was in his own world, he also went to many CNC machine tool manufacturers to see the assembly line of CNC machine tools up close, but when Jiuyi Heavy Industry started production, he trained the most important thing in the debugging of CNC machine tools. The staff is forgotten.

If it hadn't been for this CNC lathe, which was at least half a year earlier than planned, he would never have thought that the CNC machine tool had a most important debugging process after it was assembled.If the CNC machine tool is not debugged, even if it is assembled well, it will not have much machining accuracy.

Yunfei has never been so dissatisfied that his job in the original world was not in a CNC machine tool manufacturer, but as a technician in a manufacturing machinery company that uses CNC machine tools.

Fortunately, the current CNC lathes of Jiuyi Heavy Industry are only experimental production, and there is still a long time for training for personnel debugging machine tools.Just record the program for debugging the machine tool, and then record some of the parameters that need to be set by the machine tool manufacturer. In the future, the debugging personnel only need to enter these parameters into the CNC system, and after setting things such as the machine origin, enter the debugging program. It can be used to debug CNC machine tools.

As for assembly problem detection, most of the problems can also be found during the debugging of the machine tool. As long as there is no problem after debugging, the CNC machine tools produced by Jiuyi Heavy Industry can enter the market without trial processing of complex parts on the machine tool. .

Now that the problem was discovered, he must start to improve now. Yun Fei asked Yang Bingbiao to find a few six- and seven-level assembly fitters in his thirties in his assembly workshop, and called Qin Qingshan to let him debug the best machine tools. After the staff lent themselves to use it for two months, they began to train future machine tool debuggers, and at the same time began to carry out machining tests on this CNC lathe moved to the finishing workshop.

Yun Fei, the young boss of Jiuyi Heavy Industry, is immersed in the experimentation of machine tools. He has no idea. He has no reputation for a machine tool factory that has just been established within two or three months. It has been promoted by the most mainstream media of this era. Next, all domestic machine tool manufacturers have remembered the name of Jiuyi Heavy Industry.