Intelligent Industrial Empire

"Where did you come from the production technology of CNC milling machines? From the Soviet Union? Their own CNC technology is not very good! How good is the CNC machine tool you have developed?" The entire workshop is a hundred meters long, CNC milling machine The assembly area was enclosed by a wall, and I don't know who is guarding against peeping the secrets inside.

Li Lu can't believe that Jiuyi Heavy Tools has the ability to independently develop CNC milling machines and machining centers.In the whole country, there are many people studying in this direction. Even if they are researched, they are only some of the most low-end garbage products that cannot compete with foreign CNC machine tools.

Even the capital's No. 1 Machine Tool Factory, the most powerful domestic milling machine, can only import ball screws, servo motors and the most precise spindles from abroad for imitation or assembly.Limited to domestic casting process and material factors, even the most critical pillars, bases and saddles used on CNC milling machines, such large castings, cannot be compared with foreign ones in terms of performance.

In domestic castings, the internal grain structure after microscope magnification is not only uneven, the largest grain structure may even exceed the smallest several times or even dozens of times!There are also many tiny bubbles and trachoma.On the other hand, foreign castings have very uniform grain structure. Under a thousand-fold microscope, they are only the size of rice grains. In China, the larger ones are bigger than soybeans!

Although Li Lu has not been to the production workshop to observe, she still knows well about domestic CNC milling machines.Kmart now has a general business in the CNC machine tool trade, and more than 80% of the CNC machine tool trade, which accounts for half of its business, is CNC milling machines and machining centers.As the economic vitality of the Pearl River Delta grows stronger, more and more processing enterprises have been established. The domestic market, especially the most dynamic Pearl River Delta and the Yangtze River Delta, is for advanced processing equipment such as CNC machine tools that represents efficiency. Demand soared.

Although Kmart has many foreign customers, the number of machine tools they get is far from meeting the thirst of the domestic market.

Li Lu and Ren Zhiguo are both children of the military district compound. Through their parents’ relationship, they are quite familiar with the senior management of the Capital No. 1 Machine Tool Plant. Many times, they will import a small amount of key accessories from abroad through their relationship with foreign countries. Supplied to the Capital No. 1 Machine Tool Plant to produce some low-end CNC milling machines to meet the urgent needs of some customers.

This kid, Yun Fei, has brought back many engineers and technicians from the Soviet Union and related industries related to CNC machine tools. Although there are not many experts at the level of experts, most of the engineers from the Soviet Union are hard-working with rich experience. Technical talents are not the ones who have a relationship with the upper ranks and corpse positions.They have come up with CNC milling machines so quickly. It is not the technology of the Soviets. Could it be the technology of the Chinese themselves?

"What are you talking about? If the Soviets had such numerical control technology, they would have to spend all their troubles to get CNC machine tools from devils?" Yun Fei was very upset about Li Lu's words.

Needless to say, Li Lu definitely suspects that Jiuyi Heavy Industry's CNC machine tool production technology comes from abroad, or she would never say so.

"You helped bring these Soviet people, and you don't understand their details!" Yun Fei said to Li Lu in an angry manner.

When Ni Lishuang heard Li Lu say this, he pouted and stared at Li Lu angrily.

“It’s been more than half a year since the design of this CNC milling machine was first designed and the first batch of test machines started to be assembled. Those Soviets, when they first arrived in Chengdu, brother Yunfei already gave the design ideas for CNC milling machines. It was provided, but there has not been much progress. It was not until four months ago that with the participation of Academician Sun Lin and Academician Situ Heyun from the Academy of Mechanical Engineering of the Capital Academy of Sciences, there was relatively rapid progress..." I am not worried that Li Lu will continue to speculate wildly. Ni Lishuang will never tell her the research progress of these CNC machine tools.

"What? You let Grandpa Sun and Grandpa Situ work for you?" Li Lu's face looked incredible when she heard Ni Lishuang's introduction.

Sun Lin and Situ Heyun, two academicians, are actually working in September 1st Heavy Industry?

What kind of company is Jiuyi Heavy Industry?It is estimated that the entire machinery industry now knows that Jiuyi Heavy Industry is now the only company in China that is fully controlled by a private company.Although most of the production equipment and production workers belong to the 9th Academy of Machinery in name, the establishment is still in the 9327 factory, as long as you know it, this is just a helpless move for the military to not feed these workers. .

Yun Fei smiled, and Ni Lishuang was also uncommitted.This is not to let these two academicians work for themselves, but they cried and screamed to be the project supervisor engineer of their own CNC milling machine.

At the beginning, Yun Fei asked the two old guys for help only for someone to unify the scattered Soviet engineers.Among these Soviet engineers, the knowledge of the two old guys in mechanical and electrical control is not much higher than that of the engineers and technicians from these Soviet research institutes.

The Soviet Union's attainments in heavy industry are not comparable to China.

What makes Yunfei the most depressed is that these old Maozi seem to have gotten into a dead end. In the design of the CNC milling machine, the material strength is not enough, so the diameter and thickness of the parts are increased. It completely inherits the old Maozi's various military products and production equipment. Big black and thick style.

If Yunfei really produces such CNC machine tools, it is estimated that the entire industry will laugh out loud.

"Be careful, these two spindles took more than a month to make, but don't wait until the final assembly time is broken by you..." Li Lu hadn't walked to the door when she heard the message inside. Sun Lin's familiar voice.

"Grandpa Sun is really strong. You don't get off work and rest at this late hour!" Li Lu left Yun Fei and walked into the area isolated by the wall, and saw Sun Lin staring nervously at three people, forty and fifty. The year-old worker carried a part to a height as high as one person.

When Sun Lin turned his head, he realized that the girl who appeared in front of him was Li Lu, and his anger instantly dissipated.

"Girl Lu, why did you come here?" Sun Lin was curious about how Li Lu appeared in the assembly workshop of Jiuyi Heavy Industry.

"I haven't seen you for a long time. I came to see your old man from Huadu..." Li Lu stepped forward and shook Sun Lin's skinny arm, swaying like a baby.

With this action, Yun Fei's eyes were about to fall off.

Li Lu, who has never looked like a little woman, can actually act like a baby!

"Don't come to this set..." After Sun Lin saw Yun Fei appear, he immediately wanted to understand Li Lu's purpose here.

Kmart was originally a company set up by the military to pour out equipment and electronic products that cannot be produced domestically.Now that the international situation is gradually improving, the military has gradually loosened its control over Kamath, and gradually faded from the management aspect.At present, the CNC machine tool trade of Kmart has a very heavy proportion.Li Lu came here and entered the assembly workshop. If she couldn't guess her purpose, Sun Lin would have spent decades in this life in vain.

"Uh, Grandpa Sun. I really came to see you. Brother Zhiguo said that you are now doing research on the four-axis machining center at Jiuyi Heavy Industry. I am bored, so I will come to see your old man. By the way, see your research. CNC machine tools..." Li Lu didn't have the panic of being exposed in front of Sun Lin. It seemed that she had never done anything like this less.

At this scene, Yun Fei was dumbfounded.

From knowing Li Lu to the present, although the time spent together is not very long, whether it is seen from her own eyes or heard from others, Li Lu has never seen such an image of a child.Li Lu's current performance has overturned Yun Fei's long-standing understanding of this powerful woman.

However, Yun Fei found that Li Lu's face was not contrived at all.It seems that the current Li Lu is the real Li Lu, who I knew before is just a woman wearing a mask.Only this kind of Li Lu made Yun Fei feel real.

At the beginning, Li Lu’s face was haunted by Li Lu’s sister, Yun Fei was just to reduce the import cost of some CNC machine tools, and to use Li Lu’s background to help him from the Soviet network.Later, with the establishment of Jiuyi Heavy Industry, there was no interest relationship.

Yun Fei is just an ordinary and ordinary dick, and has always been insensitive to Li Lu, who originally seemed to be insensitive to human fireworks.If it wasn't for the radio and communications engineers he needed, Yunfei would never agree to Li Lu living in his own home.

"You came to see the CNC machine tool? I guess by the way, this old man made me happy..." Sun Lin took off his hand and touched Li Lu's head lovingly.

"Hehe... Grandpa Sun, that little bastard Yun Fei is hiding from me, and he doesn't even give me the agency rights of the Pearl River Delta... If I hadn't come to Rongcheng to see it in person today, I guess I would wait until these CNC milling machines are flooded. The entire market is full, I don't necessarily know that these CNC milling machines were actually made by your old man..." Li Lu complained to Sun Lin about his dissatisfaction, and slapped Sun Lin's flattery.

"It's rare that Lu girl who never flattered anyone flattered the old man, but this CNC milling machine is not the old man's credit. Come on, what do you want to know? Absolutely know everything, say nothing, our old man deserves you. Flattering?" Sun Lin said with a smile at Li Lu.

Nothing to offer courtesy, to steal or to commit.This girl had seen herself hiding far before.But after all, it’s the children who grew up watching, as long as it doesn’t involve some confidential things, it will be said.

Now Yunfei’s Jiuyi Heavy Industry, as for Li Lu, who still has the military identity behind him, what else needs to be kept secret?