Intelligent Industrial Empire

After the security guard took Yang Guang and Zhou Bin out of the office, Yun Fei's whole body's strength was taken away, and he collapsed weakly on the chair.

Human desires are too difficult to grasp.Zhou Bin and Yang Guang both had an annual salary of over 80,000, but they were still not satisfied.The two people in Xin Kaixing that Yun Fei liked the most were betrayed at the same time. Yun Fei couldn't figure it out. There was no connection at all, except for work. Who connected them?

In the middle, there will definitely be factors of interest, but it is definitely not the main one.Otherwise, the current vice president of Rongcheng Jiuyi Heavy Industry should be Yang Guang, not Wu Zhongda.However, this may also be a question of Yang Guang's vision. Why, only Yang Guang can tell Yun Fei.

"Brother Yunfei..." Seeing Yunfei's appearance, Ni Lishuang didn't know whether to comfort him, or to ask Yunfei to answer his doubts.

"Shuang'er, don't worry, I'm fine. It seems that we can't go back to Rongcheng in a short time. You can call Old Four Mao, tell Wu Zhongda, and tell him our situation..." Yun Fei Seeing the worry on Ni Lishuang's face, he squeezed a smile.

Xin Kaixing appeared in the current situation. It can be said that Yun Fei had caused all of this alone.His existence gave the factory director a high degree of centralized power. After he left, he did not take measures to restrict the rights of the factory director because of his pure belief in one person.This year, because of Jiuyi Heavy Industry, he didn't even go to Huadu at the end of last year. Even after receiving Xinkaixing's financial statements, he just glanced at it and put it aside.

Wang Qingfeng, the largest shareholder, was also implicated by Rongcheng Xinkaixing. Many times he traveled between Rongcheng and Shancheng. At the end of the year, he had to go back to his hometown in the northeast to spend time with his family, especially when he gave birth to a girl. Zhang Rui is in the northeast, his daughter and Zhang Rui are in the same situation, Wang Qingfeng simply does not have enough time and energy to manage Xin Kaixing.When you get used to throwing your hands off the shopkeeper, where can you be like before when there was no Yun Fei?Xin Kaixing was guarded by a bunch of his old brothers, and he didn't think there would be any problems.

"Brother Yunfei, those CNC lathes are no different from the CNC lathes produced by us. How did you find out?" Yunfei just called and called Wu Jianguo and Yang Dezhi back. He lit a cigarette and thought about it. Where to find a professional manager to manage Xin Kaixing, Ni Lishuang asked her doubts, and she couldn't help it anymore.

"Shuang'er, you are not in this business, so in your eyes, these beds are no different from our CNC lathes. If you just look at it from the outside, you can't see it, even I can't see it. We For the CNC lathes produced, except for the ball screws, which are produced by ourselves, the other key parts are also imported. Without turning on the machine tool, you can't see it at all!" Yun Fei explained to Ni Lishuang.

If it weren't for him, Wang Qingfeng, those who don't know much about CNC machine tools, wouldn't be able to find the tricks here.

"Then how did you see it?" Ni Lishuang asked, Yun Fei couldn't see it by himself, so how did he discover that the CNC lathe in the workshop was not produced by Jiuyi Heavy Industries?

"If Yang Guang said that these equipment were left unused because the processing business was not full, I would not move those equipment. Most of Xinkaixing's precision processing business is processed through foreign trade parts and Most of the precision-processed products of the military are businesses that I talked about when I was the deputy director of this factory. He knew that I knew about these businesses, so he could only answer me saying that these equipments were all Except for problems." Yun Fei's face gradually returned to normal.

If I went back to the factory this time, I didn’t see that the few people that I had placed in the entire factory were gone. In addition, the entire production workshop was completely out of management. Yun Fei would not have thought. Zhou Bin and Yang Guang were able to unite to steal the mid-range CNC lathe transferred from the company's Jiuyi Heavy Industry.These lathes are all mid-range lathes with top configuration, and the price in the market is more than 170,000!

"Except for a few domestic factories that use Huadu CNC's Long CNC system, many of them are FANUC systems imported from Japan or Siemens systems imported from Germany. Since they want to imitate the CNC lathes of Jiuyi Heavy Industries, it is unsightly. Something went wrong, so they could only use the Long CNC system produced by Huadu CNC. But they didn't know that the most critical part of the CNC lathe of Jiuyi Heavy Industry was actually on the system."

The nine-one heavy industry CNC lathe that replaces eight chips with thirty-two chips has only subtle differences in the boot interface and the operation interface, which are not found by people who are not particularly professional.Because of the modified system, all control codes, programming formats, and tool setting methods are no different from Long CNC.

The system modified by Jiuyi Heavy Industries is very different in the parameter settings of the machine tool.

The machine tool parameters in the numerical control system, in addition to the part set by the numerical control system manufacturer, some of the most machine tool parameters, such as the machine origin, the maximum speed limit of the machine tool, and the maximum movement speed control, are all set by the machine tool manufacturer.To enter these parameter setting interfaces, it is impossible for a key technician of the machine tool manufacturer to get the password.

The parameters set by the machine tool are the ultimate killer of CNC machine tool manufacturers.If there is a problem with the parameter setting of the sold equipment, the machine tool manufacturer would rather spend a higher cost, send professional parameter setting personnel from the company to the customer’s workshop, and will not tell the customer to enter the most basic parameters Set the password of the interface.The more high-end CNC machine tools, the more precise the CNC machine tools, those parameters become more important.

These parameters have been explored through countless experiments.

A large part of the setting parameters of the Long CNC system are provided by Yunfei, and the debugging of the CNC lathe of Jiuyi Heavy Industry is also carried out by Yunfei himself.Once the system is turned on, once the machine is running, you can know exactly what is wrong.

“Maintenance of CNC machine tools often involves modification of parameters. I turned on the machine and found that the system was okay. After entering the parameter page, I discovered that these systems are not ours. Finally, look at the end of the guide rail. It’s not easy to notice the machine number of the place where I found out that there is no special number of our Jiuyi Heavy Industry. It is also the same, I discovered that these CNC lathes are not produced by our Jiuyi Heavy Industry, but those outside factories. In terms of machining accuracy, CNC lathes have no way to compare with the machine tools we produce. Xinkaixing’s main machining business is either military products or foreign trade workpieces from German IDG and EMG companies, and some are from the United States. The business of these companies requires not only high precision, but also high appearance quality. The CNC machine tools produced by other domestic machine tools can not make these parts at all! Buy imported CNC lathes that can do these tasks, even if they are used Yes, it costs more than 150,000. We are now able to produce such equipment, why should we let others make our money in vain?" Yun Fei thought about the whereabouts of the batch of CNC lathes and explained to Ni Lishuang. .

Ni Lishuang doesn't know much about CNC machining. After listening to Yun Fei's words, he still seems to understand.

"Brother Yunfei, if you say so, how does the company accomplish these businesses?" Ni Lishuang grasped the point.

Xinkaixing did not have many CNC lathes that could handle the foreign trade products of IDG and EMG for tooling. Otherwise, Yunfei would not even start from 200 units per month when the market demand is extremely large. The output is transferred to Xinkaixing 20 units.

"This is another problem. The profit of foreign trade processing business in the CNC industry is far higher than the profit of domestic machining, especially the difficult and high-precision business, the profit is even higher. Xin Kaixing in two years Inside, from a small factory with only 30 or 40 ordinary machine tools and 60 or 70 people, to the current machining workshop with more than 400 people, close to 100 CNC machine tools, all because of CNC machining business. When we were Qingfeng Machinery, we made the first batch of thin-walled stainless steel parts. Regardless of the cost of the machine tool, the labor cost was only less than one hundred and five, and the processing fee for each product was more than 1,000. Besides, dozens of kilograms of stainless steel shavings cost hundreds of dollars. How much profit do you say? Since they replaced these CNC machine tools with some garbage CNC machine tools, they would definitely get the processing business. The processing plant for that batch of equipment is sitting here. Under the full start of construction, the cost of the machine tools will return in half a year!" Yun Fei knows too much about the tricks in the middle.

"They are borrowing a chicken to lay eggs!" Hearing Yun Fei's words, Ni Lishuang finally understood.

Zhou Bin and the others put these advanced equipment outside, and then buy some equipment with low precision from outside. Xinkaixing will definitely not be able to produce products that meet customer requirements. If the company wants to deliver the goods within the time required by customers, it must These products should be outsourced to processing plants with strong processing capabilities.

"Then they changed those processing centers for the same purpose?" Ni Lishuang finally understood why Yunfei had to go to Kmart to copy the list of equipment transactions between Kmart and Xinkaixing this year.

Since Zhou Bin and the others even dared to replace the CNC lathe produced by Jiuyi Heavy Industry, they will definitely replace part of the new machining center they bought.In this way, they will be able to get more processing business transferred through Kmart. In a short time, their profits will exceed Xin Kaixing.Because Xinkaixing's equipment has become their rough processing factory.