Intelligent Industrial Empire

"Are you an expert from the Soviet Union?" The old man asked curiously, facing the blond white man in front of him.

There are many engineers and experts and senior skilled workers from the Soviet Union in Jiuyi Heavy Industry. Many people in China know this.After the disintegration of the Soviet Union, China took the opportunity to network many experts to contribute to China's national defense cause, which became the leader of the red camp after the Soviet Union.

However, most of the experts from the Soviet Union are in Chinese military factories, and it is difficult for the outside world to see them.However, after Kmart started the headhunting business, a large number of Soviet engineers and technicians were fooled into China. This is a very common phenomenon in the coastal areas.

The experience and skills of Soviet engineering technicians are much richer than those of Chinese without professional training, and the cost is much lower than that of engineering and technical personnel in European and American countries. They are very limited by the talent gap of those Chinese private enterprise owners. Favor.

"Yes, Mr. Chairman!" Tanalia didn't know, the old man had retired long ago.

"Lao Deng, this is the chief engineer of our Electronics Division, Tanaliya, from Ukraine." Regarding Tanaliya's address to Mrs. Deng, Yun Fei didn't know whether it should be corrected or not. Anyway, This matter, it is not his turn to interrupt.

"Oh! Ms. Tanalia, my old man has long since retired. You can call me Deng like them. Thank you for your contribution to China's CNC machine tool industry. How about, are you still used to it in China? "The old man did not expect that the chief engineer of the electronics division of Jiuyi Heavy Industry was actually a skilled person.

"Thank you for your concern. Our boss is very nice and created a good research environment and living environment for us. This is much better than in the Soviet Union..." Tanalia did not forget to take a picture at this time. The ass of her young boss.

She knew that only when the boss was comfortable, could she sign on the research project they had declared and then paid for it.

While listening to Yun Fei's introduction, Mr. Deng shook hands one by one with the project leaders of the research team, which was mostly Soviet, and thanked everyone.

For Visarion Lovech, who was standing side by side with Sun Lin and Situ Heyun on the research team, the old man was a little surprised. While shaking hands with him, he cast a questioning look at Yun Fei. .

Yun Fei put his mouth close to the old man's ear and whispered something, which made reporters a few meters away very curious.But this picture was captured by almost all reporters.

This visit by the old man was originally private, and the outside world has a strong curiosity about the mysterious but not long-established Jiuyi Heavy Industry Research Institute.

It is reported that there are many major scientific research projects in this private research institute. The state has not established any projects. They were all funded privately by the boss of Jiuyi Heavy Industry, and none of them were reported to the state!

This photo alone can make all reporters feel worthy of this trip.Elderly people after retirement, young rich men who just grew beards on their lips, and young high-tech project research team leaders!There is too much hidden in it, which is worth digging.

It is a lot of private things that cannot be seen in the newspapers, but what major projects are there in the research institute of Jiuyi Heavy Industry that cannot be known to most national ministries?

Just like the Chengdu Municipal Party Committee and Municipal Government, Jiuyi Heavy Industry did not engage in any welcoming ceremony such as flowers. After being greeted by a group of middle and high-level officials outside the office building, Jiuyi Heavy Industry brought the delegation to the production workshop.

"Most of these equipment are old equipment in the original 9327 factory. After repair and transformation by researchers from China and the Soviet Union, they can save energy by almost one-third compared to the old model, and at the same time increase production efficiency by 20%." The government did not arrange a visit route, and the entire inspection group followed the route arranged by Jiuyi Heavy Industry for inspection and visit.

In order to let those who were not born professionally, and even those who don’t even understand what CNC machine tools have an intuitive understanding, under the joint decision of Yunfei and Xie Heping, the inspection group conducted directly from the smelting workshop of Jiuyi Heavy Industry. Visit.

The visit itinerary this time is actually the entire production process of CNC machine tools.

However, since the elderly is ninety-one years old, the inspection group is again divided into two parts. Most foreign inspection groups mainly inspect the entire CNC machine tool production workshop of Jiuyi Heavy Industry, accompanied by Wu Zhongda.After visiting the most basic smelting and casting workshop, the elderly will directly enter the assembly workshop, and then the main event is to visit the independent research institute.

Therefore, he explained very hard for the smelting and foundry workshop where the elderly visit itinerary only by himself introducing the situation.You know, for smelting and casting, he, the general manager who studies manufacturing rather than materials, does not have a special understanding.

"Yes, who said that old equipment cannot produce good equipment? Your experience should be promoted throughout the country. Our country is not rich yet. There is a lot of room for improvement in energy conservation and production efficiency. These old equipment, since can be used

, Why must it be replaced with new equipment that cannot greatly improve production efficiency and quality?"The old man heard that Wu Zhongda introduced that the various furnaces in the smelting workshop of Jiuyi Heavy Industry were remodeled old equipment and second-hand equipment bought from the Soviet Union.

Yun Fei is a young man who knows how to live!

To do business, we must give full play to people's subjective initiative and strive to improve our own technical level. Everything depends on buying new equipment. That will not improve quickly, and at the same time, there can be no great accumulation and improvement in technical level.

Up to now, China has not much foreign investment, and most of them have been taken away by foreign equipment manufacturers!

This makes the old man very sad.

"Boy Yun, yes, very good." After the old man finished speaking, he praised Yun Fei with a smile on his face.

The old man did not hesitate to praise the young man he had been very optimistic about from the beginning.

"Old Deng, you passed the award. I was also forced. If it weren't for the company's thousands of people to support, I would also like to buy new equipment! Doing it myself, after all, it's too much trouble!" proudly.

Of course, these old equipment can be transformed into what they are now, but it is all the blessings of having been a technician in that state-owned factory for so many years.He didn't major in materials, and he didn't know the equipment used in materials, but at that time, many of the products they produced were used in the military industry.Therefore, the requirements for the batch number of the material are very high.

Even if the equipment is used, the operators of all production processes can be traced from the furnace batch number!Therefore, in many cases, the machining workshop must always contact the melting and casting workshop where the material is produced.I am very familiar with the technical parameters and structure of the high-temperature furnaces used for smelting and heat treatment.

"Lao Deng, this is our CNC machine tool assembly workshop. Except for the servo motors used for transmission and some electronic and electrical units used for feedback control, most of them are made in China." Yun Fei knows that the elderly have considerable expectations for domestic production. , But the servo motors or stepping motors used for transmission by CNC machine tools cannot be produced in China. In this respect, the elderly cannot be deceived at all. Otherwise, the number one CNC machine tool manufacturer in China will not fall to September 1st. Heavy industry has less than two factories

The head of the private enterprise of the year.

"When can all the spare parts be fully self-produced?" Seeing that the entire workshop was filled with CNC lathes and CNC milling machines being assembled, the old man was about to praise Yunfei, but he heard what Yunfei said-core components Can't fully produce independently, and his face becomes lonely.

If it cannot be fully made in China, it is very likely that Jiuyi Heavy Industry will be caught in the neck by foreign parts suppliers when competing with foreign countries.

It is estimated that this is the reason why the young man in front of him has not expanded the production scale of Jiuyi Heavy Industries.

Once Jiuyi Heavy Industry expands its production scale, it will fully open up competition with those foreign machine tool suppliers.Now because of the emergence of Jiuyi Heavy Industries, foreign CNC milling machines and CNC lathes have carried out large-scale price cuts. If they wait until Jiuyi Heavy Industries has developed a three-axis machining center, those foreign CNC machine tool manufacturers will feel threatened. .

After all, CNC lathes and CNC milling machines are not large-scale imported products in China. Linked machine tools with more than three axes are the main products of China's CNC machine tools.

“Now the research institute is conducting a comprehensive research on core components. If nothing happens, these core components can be made domestically within three years. The Rongcheng Viewpoint Research Institute has now begun to study the use of CNC machine tools for displacement detection of CNC machine tools. The grating ruler is estimated to be able to produce samples by the end of this year..."

Three years, at least a conservative estimate.

The research on the AC servo motor of Jiuyi Heavy Industry has long been under the leadership of Situ Heyun. At the same time, Huadu CNC is also researching this aspect, but it has not made breakthrough progress.

"In other words, you have to wait three years for the production of CNC machine tools to expand?" The old man sighed.

Because of Yunfei's concern, he also understands that CNC machine tools are old people in the market.The domestic demand for CNC machine tools is increasing every year, but those state-owned machine tool factories are not up to date and always want to rely on the introduction of production technology from abroad, while ignoring their own technological accumulation and development.

But multi-axis linkage CNC machine tools with more than three axes are a kind of strategic equipment in the entire world!

Only Jiuyi Heavy Industry can carry the banner of the national industry of CNC machine tool industry.