Intelligent Industrial Empire

"This can't be measured by scale, right?" Wang Ziqing didn't understand Peng Zhi's words.

CNC machine tools are not another industry. In this industry, it is technology and capital.

If measured by the scale of production, it is estimated that the entire world cannot find many machinery manufacturers that can compare with those on the mainland with tens of thousands of people.The fact is that these mainland machine tool factories can't even compare to Taiwan's most trash newly established third-rate CNC machine tool manufacturers in the CNC machine tool manufacturing industry.

The mainland government cannot be unaware of such a thing.

Or do they think that as long as they get the technical information, they can produce a CNC machining center that can compete with them in a short time?

Is this possible?

If so, perhaps these state-owned machine tool factories in the mainland have imitated CNC machine tools imported from all over the world a few years ago!

CNC machine tools are not a little bit involved.

Even their Taiwanese CNC machine tool manufacturers have to import the CNC system used by CNC machine tools, the servo motors used to transmit feeds, and DC stepper motors from Japan...

"Many mainland officials believe that the quality is not good, but quantity can be used to make up for it..." After Peng Zhi said lightly, he was about to get up and leave.

"By the way, Mr. Wang, when you have any action on the mainland market in the future, please let me know first. If the 9327 factory started by Jiuyi Heavy Industry is not taken back by the mainland’s Ministry of Industry this time, it is estimated that we will be on the road. It is difficult to gain a firm foothold. Jiuyi Heavy Industry is now cooperating with Haer Heavy Industry in the northeast to produce a large number of large castings used in processing centers..." As he was about to leave, Peng Zhizheng turned his face and said to Wang Ziqing.

Thanks to their dealings with companies in Europe, America and around the world, these companies in Taiwan have developed a good habit of collecting intelligence on their competitors.

Although the cooperation between Jiuyi Heavy Industry and Haer Heavy Industry has not been reported by the mainland media, any interested person can know this from the raw material procurement and logistics of Haer Heavy Industry.

"Jiuyi Heavy Industry has the strength to produce three-axis machining centers?" During this period of time, I have been busy building its own factories in mainland China, and have not paid much attention to collecting intelligence on these mainland competitors.

With the existence of the Taiwan Machine Tool Association, Taiwan's various machine tool companies share intelligence on the mainland market, and Wanyou Group will notify them of any competitor intelligence.

Taiwan's machine tool companies are also competitive, but when they enter the mainland, their main competitors are these machine tool factories in the mainland. When there is no large-scale occupation of the mainland market, their internal competition will not be too fierce.

Otherwise, under the pressure of CNC machine tools in Europe, America and Japan, these companies will not be able to spring up like bamboo shoots after a rain. They have established so many brands in just over a decade, and they have survived in the cracks between Europe, America and Japan. , And grow stronger.

"It's not just a three-axis machining center that is as simple as that. The young boss of Jiuyi Heavy Industry also has a simple fourth-axis production technology in his hands!” For Yunfei Jiuyi Heavy Industry, they have paid enough attention to it, but they did not expect this to be established. However, a small factory in more than two years has made such progress in technology.

At least, the current CNC machine tool factory in Taiwan has encountered difficulties in the development of four-axis machining centers.

Such technology is a key technology of core competitiveness in the whole world.

Most CNC machine tool manufacturers in the world only have ordinary CNC machine tools with three axes and below.Four-axis and more than four-axis machining centers are only in the hands of some large manufacturing companies in the traditional CNC machine tools manufacturing countries such as Europe, America and Japan.

It is simply impossible to buy it in this age!

"We are just underestimating our most powerful competitor in the mainland!" Wang Ziqing said instantly annoyed.

If he knew this information from the beginning, he would definitely not put a large number of Taiwanese CNC machine tools to the market at a low price after their mainland factory had not been built!This time, I was shocked. If Jiuyi Heavy Industries was not disabled by the mainland government, their development in the mainland would be really difficult.

"Not only did you underestimate them, I also underestimated them. Since the mainland government purchased a few four-axis machining centers from Germany in 1992, it has not been as urgent as before. You must know that the number of troops in the mainland and the needs In terms of equipment, there are no more than hundreds of thousands of four-axis machining centers, which are simply not enough. And they are already looking for five-axis machining centers..." These information are all from the Wanyou Group in Taiwan during this period. The staff on the side got the news from the Taiwan government.

Since the mainland’s reform and opening up in the late 1970s, many Taiwanese companies that have been greatly affected by the Japanese financial crisis have discovered huge opportunities in the mainland, and they have swarmed into the mainland market and used their huge financial strength to open various businesses in the mainland. Such factories, using the abundant and cheap labor costs and abundant resources in the mainland, once again rise up among the declining Asian Tigers.

The mainland's economic development over the years has attracted the most capital from Hong Kong, which is still under the rule of the Queen of England, and Taiwan's capital, which has been clamoring for a nation.

In the earliest years of reform and opening up, the mainland was the easiest to approve foreign investment, that is, these capitals that belonged to the same ancestor with the mainland.

As the capital of Taiwan and Hong Kong became weak, the mainland began to increase its efforts to absorb capital from around the world and use these foreign capital to stimulate its own economic development.And take this as an opportunity to carry out a lot of domestic infrastructure construction.

"Five-axis machining center, shouldn't any country sell it to the mainland now? Although the Toshiba incident has passed for many years, the European and American review efforts in this area have not relaxed the slightest. Mr. Peng, in this situation, we should next How to deal with it?" Wang Ziqing really did not expect that he would encounter such a situation when he first entered the mainland market. If he knew it earlier, he should enter the mainland market earlier.

"How to deal with it? We can only wait! Now that I have done everything, I have to obey the fate of the remaining time!" Peng Zhi said coldly.

Before entering the mainland market, these companies have already established alliances to collectively respond to the unexpected in the Chinese market.

But now that the factory has not officially put into production, it has caused a backlash from Jiuyi Heavy Industry. If the young boss of Jiuyi Heavy Industry cooperates with those large state-owned machine tool factories, they will be in danger.

Although they set up factories here for the Chinese mainland market and advertised China's own CNC machine tools.But compared with Jiuyi Heavy Industry, a native company, it has no advantage at all.

We can only use the thinking of some mainland officials who feel that the moon abroad is rounder than China to find a breakthrough.

Wu Chengfeng fools around with that Xiangjiang woman every day, and doesn't pay much attention to Chinese competitors at all, he will cry at that time!

"I have to go back to Taiwan during this period. The factory on your own side should speed up the progress a little bit, and it is best to keep the same time as our Wanyou Group in March to market products..." Peng Zhi looks outside It was getting late, and he got up to leave.

Taiwan's CNC machine tool companies are building assembly plants in the mainland. The largest Wanyou factory here has a capacity of only 3,000 units per year. At present, it seems that it cannot meet China’s rapid increase. market.

He is very worried that the young boss of Jiuyi Heavy Industry will engage in a price war with them. This is a disaster for these companies with huge debts!

"Are you going back to Taiwan?" Wang Ziqing did not expect that Peng Zhi would choose to leave the mainland and return to Taiwan at this moment.

Did he go back to avoid suspicion or go back to prepare to deal with the changes in the mainland market?

"Yes, the air ticket for the morning after tomorrow." After Peng Zhi finished speaking, he left the private room of the teahouse without looking back.

Inadequate and conspiracy!

Peng Zhizhen didn't know where Wang Ziqing's shrewdness in the Taiwan market had gone.

The CNC lathes of Jiuyi Heavy Industry have gained a large market share in the Chinese mainland market in a short time. Wang Ziqing actually gave up his own advantages and wanted to compete with Jiuyi Heavy Industry in the Chinese mainland market!

You know, Taiyu's CNC lathes can only be regarded as the technical level between low-end CNC lathes and mid-range CNC lathes in the mainland market.If it is imported, it still has the advantage of import, but once it is produced in China, it is not enough.

At least, their production costs cannot be compared with companies like Jiuyi Heavy Industries.They don't know the production cost of Jiuyi Heavy Industries, but Xinkaixing, which is also an industry under Yunfei, can know that the production costs of these factories are not higher than those of Taiwanese companies.

Lower production costs and higher technology mean more profit in the market.

If Jiuyi Heavy Industries cannot be defeated in the machining center, once Jiuyi Heavy Industries develops, these Taiwanese companies that purchase production technology from some third-rate CNC machine tool factories in Japan or Italy, in the mainland market, can only sell large-scale CNC machines in Europe, America and Japan The machine tool and the newly-emerged Jiuyi Heavy Industry in China seek to survive.

In China’s CNC machine tool market, there are a large number of state-owned machine tool factories with terrifying production capacity in the low-end market. In mainland China, basically only a few powerful companies have a small amount of exports.

These Taiwanese machine tool factories are very reluctant to produce mid-range CNC machine tools...