Intelligent Industrial Empire

Seeing Zhao Xingbang's firm eyes, Yun Fei knew that there was no room for discussion on this matter.

If you do not agree, perhaps the country will exchange this huge order with Taiwan-funded enterprises.For a long time, the country is best at doing this. If Taiwan CNC machine tool company is unwilling, perhaps this order will return to the hands of Japanese or German companies.

Now foreign four-axis machining centers have gradually opened up to mainland China. For three-axis CNC equipment that has changed from high-end to mid-range or even low-end, especially after Chinese domestic enterprises can produce it, foreign CNC equipment production powerhouses have begun to fully Liberalize the Chinese mainland market, use their garbage processing centers to hit the Chinese market, and wipe out Chinese domestic roads in the bud.

Someone once said that as long as there is a 100% profit, the capitalist will take the risk, and if there is a 200% profit, the capitalist will not even have his life.

This fully illustrates the nature of capitalists' pursuit of profit.

The price of CNC equipment is already high, and the markets of European and American countries have gradually become saturated. Now the biggest markets are Asia and South America, where the economy is developing rapidly. The African market is blank. Of course, this market is blank for countries and organizations in a huge area. , Busy fighting wars and territories every day, they have no intention of buying these expensive equipment to develop their industry.

And China is the biggest market.

For industrial powers such as the United States and the European Union, numerical control equipment is counted in millions. Japan is a small country with millions of numerical control equipment. China’s domestic numerical control equipment is basically blank.

How much profit is there, who can't know?

Otherwise, how can foreign countries that have always regarded China as the biggest threat to export to China the three-axis processing centers that they have listed as strategic materials and have been prohibited from exporting to China for decades?

China’s national purchase order exceeded US$200 million this time, and no company in that country would be uneasy!

Therefore, if China exchanges this order for the production technology of the three-axis machining center, the company will definitely be moved.

"All the technologies?" Yun Fei's heart was twisted.

Not only did the country fail to support Jiuyi Heavy Industry, it forced them to hand over the technology!

But fortunately, at least they didn't directly grab it and threw a huge order!

"Three-axis linkage! It's just your mature technology for mass production, and you don't need to develop further technology." Zhao Xingbang also knows that he was able to lead such a large inspection group not long after he entered the National Defense Science and Technology Commission, mainly due to His personal relationship with Yun Fei.

At least, the country also hopes that Jiuyi Heavy Industries can take out the technology of the three-axis machining center in exchange for the country's huge order this time. The country is unwilling to allow Taiwan's CNC equipment manufacturers or companies in Europe, America or even Japan to get such a huge order.

The order is given to Jiuyi Heavy Industry, which will spend it domestically anyway.

If the order is given to a Taiwanese company or a CNC machine tool factory in Europe, America or Japan, the money will come from abroad!

"It must be free?" Yun Fei reluctantly breathed a sigh of relief.

Even with the production technology of three-axis CNC machine tools, the production technology of the four-axis machining center and the complete CNC system are not available, even if the Capital One machine adopts the Long CNC system of Huadu CNC, it can only generate simple four-axis three Linked machining centers, even true four-axis four-linked machining centers, cannot be produced.

There is no such thing as Yun Fei's future generations to guide the capital.

In the world of Yunfei, from the mid-1990s, the Capital One machine was able to produce three-axis and two-linkage CNC milling centers. By the late 1990s, it was able to produce three-axis and three-linkage machining centers, but it was not until 21st. After the first ten years of the century, it was impossible to produce a four-axis four-link machining center.Finally, because the three-axis machining center has no market competitiveness, it is developing in the direction of high-speed milling, producing some light high-speed CNC milling or engraving machines and other equipment.

Zhao Xingbang did not answer Yun Fei's words, but shook his head with a smile.

Yun Fei was happy instantly.

As long as it's not free, it's fine.

It seems that the country’s bigwigs are still very kind this time.

With such a huge domestic market, the Jiuyi Heavy Industry family can't finish it at all. There is nothing to do with another alliance, but this alliance is a capital machine, and Yunfei cannot resist it.

In this case, those studies and experiments that were not allowed to be seen by Zhu Feng and Liu Cheng of Capital No.1 Airport could simply not be shown to them.

Yun Fei did not talk about this with Zhao Xingbang anymore, but directly confronted Park Yanji on the side in front of him, put his mouth to the ear of Park Yanji, and confessed in a low voice.

As everyone watched, Yunfei was so close to him that a red cloud suddenly appeared on Park Yanji's face. After Yunfei gave his explanation, he quickly left the inspection team with a red face.

"Mr. Wu, did your machining center spindles be produced by yourself?" In the precision machining workshop of Jiuyi Heavy Industry, Zhu Feng, who had been enduring no words, finally couldn't help but ask his own question.

In this workshop, there are more than a dozen CNC lathes produced by Jiuyi Heavy Industry without a safety cover in the machining of spindles. As the chief engineer of Capital No. 1 Machinery, he can't come out. These spindles are precision spindles used in machining centers.

At this time, they have already understood how far the Capital One Machine is from the private enterprise that has just been established in Jiuyi Heavy Industry.

The CNC milling spindles produced by their company are all imported from Taiwan!Had it not been for the channels of Taiwan's CNC equipment manufacturing company, they would not have hooked up with Peng Zhi of Wanyou CNC Group from Taiwan soon.

"Yes, so far, except that the servo motors are imported from Japan Er Leng Company and Fuji Company, including roller screw pairs and sliding guides, these are all independently produced. After our own servo motor is developed, Jiuyi Heavy Industry The CNC equipment produced is completely domestically produced!" Wu Zhongda did not know Zhu Feng, thinking that this product was also a big leader, and proudly introduced it.

"Our Jiuyi Heavy Industry is not like those shameless companies. In addition to producing some of the most basic parts, the key parts are imported from abroad. We are just assembling, so we are embarrassed to declare our own brand, completely domestic! It’s really thick enough! Even our September 1st Heavy Industry Co., Ltd. dare not publicize completely domestic production..."

Wu Zhongda's words made Zhu Feng's old face flushed suddenly.

Liu Cheng sighed.

It is estimated that this is because the kid Yun Fei knew that he was coming with Zhu Feng, and let Wu Zhongda say this on purpose.

This was not only said to these bigwigs, but also to the person in charge of the Capital One Airport and Zhu Feng, the chief engineer.

These words also cursed all the domestic CNC machine tool manufacturers.

The localization of medium and high-end CNC equipment such as machining centers and CNC cars is a pain in the hearts of all Chinese people.

Rongcheng Xinkaixing, the only company in China that can produce ball screws and matching ball bearings, was originally provided for Jiuyi Heavy Industry. The products are not even enough for Jiuyi Heavy Industry, and it is even more impossible to accept orders from other companies.

For key parts such as roller screw pairs, servo motors, precision slides, and precision spindles, the only thing that Capital One can produce is precision slides, and it is also the lowest level of hard rails in the slides!

"Mr. Wu, can you please give us a detailed introduction to the production process of the precision spindle produced by your company? What materials are used?" At this moment, Zhu Feng can't bother to blush. Their Capital One Machine has already been developing spindles. , But it has always been because the materials are not good enough to get it out.

Even if 40Cr is used, which is relatively good in China, after heat treatment according to some technical documents obtained abroad, the surface hardness of the spindle can reach HRC50, and it cannot support the entire spindle to remain stable during the long-term cutting process.

Even when performing heavy-load cutting, the spindle will wear out soon after.

Hearing the old man in front of him asking such a professional question, Wu Zhongda stared at him vigilantly and ignored the introduction. Seeing the old man staring at him expectantly, he suddenly had a bad feeling in his heart and turned his head towards Yun Fei on one side looked.

"Old Wu, this is the chief engineer of the Capital First Machine, Zhu Feng, and President Zhu." After learning the details from Zhao Xingbang, Yun Fei, who had a deep heart, did not worry about these key technologies being learned by them.

"Mr. Zhu, the main shaft used by our machining center is made of two materials: 30CrMoSiA and 38CrMoAl. 30CrMoSiA, some military factories have a small amount of production, and there are also imported ones on the market, but the price is a bit slaughter. It costs tens of thousands of tons! And materials like 38CrMoAl, like materials like superalloys and titanium alloys, are strategic materials and are not exported to our country at all..." Yun Fei said to Zhu Feng with a smile.

30CrMoSiA belongs to alloy structural steel, mainly used for some high-strength, high-load shafts. Now when China is not able to mass-produce and reduce production costs, the main use is the military industry, especially naval ships, such as gearboxes. The transmission gear inside, the main shaft inside the gear box, etc.

Of course, some key parts of guns have begun to use this material gradually.

38CrMoAl is also an alloy structural steel. The material properties of 30CrMoSiA are better, but the production cost is higher and the ratio is not easy to grasp. In the 1990s, it was a special alloy material that was restricted to China.

These two materials are not only expensive, but also difficult to process for China, where tool materials are also restricted.

The spindle of the machining center not only has high requirements for materials, but also has harsh requirements for heat treatment and processing techniques.

Before rough machining, forging must be carried out, then the first heat treatment, after the turning and initial machining, the second heat treatment, and aging treatment must be carried out, and then super finishing such as semi-finishing, finishing, and grinding. A series of complex processes...

"..." Upon hearing Yun Fei's words, Zhu Feng, Liu Cheng and several other industry leaders took a breath.

It seems that what Jiuyi Heavy Industry possesses is not only the technology of machine tools, but why does no one know that they have made great achievements in materials?

"For these two materials, our Jiuyi Heavy Industry can only produce on a small scale, and can't even meet our own use!" Yunfei directly used this reason to tactfully reject the non-discriminatory demands that Zhu Feng or Liu Cheng will make.

The formula and production process of this material were produced only after smelting hundreds of tons of materials in the smelting workshop of Jiuyi Heavy Industry. Even now, it still cannot be mass-produced.

After the completion of the first round of equipment upgrades, Jiuyi Materials mainly produces these two kinds of materials that domestic steel mills cannot produce or even have never heard of such materials!Since the military wants to change equipment, only the production of 30CrMoSiA is enough to bring Jiuyi material back to life.

Do not think that tool factories cannot produce steel!

However, it is now very difficult to produce it in Jiuyi Materials.

Jiuyi Materials is located in the city of Rongcheng. In order to produce products with high energy consumption and high pollution like steel, even if the Rongcheng government agrees now, with the development of Rongcheng, it can only be closed or relocated in the end!

There is no other choice.

Therefore, this makes the Yunfei investment plan suffer a setback.

"Xiao Yun, when will you be able to produce these materials? Why don't I know?" Zhao Xingbang did not expect that Yun Fei, this kid, would put everything in his hand!

And it succeeded quietly!

"You haven't asked me again! Besides, these materials, which your military can produce, cannot even be guaranteed for your own use. It is impossible to provide them to private companies like ours. The imported materials are too expensive to produce by yourself. How can it be?" Yun Fei said with a lonely expression.

He deliberately stated that his company can produce these two materials that cannot be mass-produced in China.

Isn't the country trying to force me to hand over the technology?

Got to charge some interest!

If there is no strong trump card in his hand, in the process of transferring the production technology of the processing center to Capital One, it is not easy for Yunfei to open his mouth.

Therefore, he must let these guys who can make decisions on behalf of the country know that they have better cards in their hands.

Materials are more important to the country than CNC equipment!

Especially some high-performance alloy materials that are widely used in military applications!

China's industrial development is not only restricted by the level of machinery manufacturing, but also by materials!

Materials and manufacturing technology are complementary!

No matter how strong the manufacturing technology is, it is useless without high-performance materials.

There are high-performance materials, without the matching processing technology, it is impossible to turn the materials into the required high-precision products, which is useless!