Intelligent Industrial Empire

At the time of the national order, the military only gave a symbolic order for dozens of four-axis machining centers of Jiuyi Heavy Industry. In order to obtain more orders in the future, Yunfei also improved the accuracy of the entire Jiuyi Heavy Industry's four-axis machining center. Grade, the standard reported to the military is that these four-axis machining centers all include automatic detection devices!

Now that the four-axis machining center of Jiuyi Heavy Industry has gradually matured, the production plan has been scheduled. Some key parts with a long construction period have been roughed, and many have even begun to natural aging......

In mass production, natural aging is a very serious backlog of funds for enterprises.

Even a company with deep pockets like Jiuyi Heavy Industry would not dare to play like this.

The more precise the parts, the longer the natural aging time.

However, in order to eliminate as much as possible the processing stress generated by the machining process in the parts, it is necessary to perform multiple heat treatments.

In order to improve the accuracy and service life of parts, and reduce production costs, Jiuyi Heavy Industry not only uses multiple heat treatments, but also applies semi-natural aging to these parts under artificial conditions.This is the aging method used by Jiuyi Heavy Industry to produce the guide rails of the inclined bed CNC lathe and the key components of other precision CNC equipment.

"Xiaoyun, if they can't complete the research, should we give in to accept their technology, or..." Regarding the situation there, Sun Lin, who is mainly responsible for the four-axis machining center project, is still aware of the situation.

The machining accuracy grade of their four-axis machining center is also 0.005mm, and the inspection technology is also such an accuracy, which can already be matched.

Yun Fei shook his head: "Lao Sun, we can give in to other things, but it is absolutely impossible for detection. For this technology, we have already paid a lot of money. If the detection accuracy cannot be higher than our production Accuracy, it is difficult to improve the production accuracy of our products. Once we have made concessions now, we do not know how many concessions will be made in the future!"

In terms of technical research, it is not enough.

They are almost the same, and others will be even more similar. At that time, the Jiuyi Group will be fully surpassed by those domestic counterparts who are catching up.

Yun Fei didn't want to see things like that.

"Our motorized spindle technology is still immature. Don't use it for the time being, right? At that time, we gave them a maximum speed of 12,000 revolutions per minute. Now our spindles can fully achieve it. There is no need to move towards 18,000 revolutions per minute. Speed..." Although Sun Lin agrees with Yunfei’s idea of ​​providing higher-performance CNC equipment to the military, his own technology is obviously immature now. If he does this, it will affect the entire company’s Credibility.

The military has always been the most important customer of Jiuyi Group.

They attach more importance to the military than even those private enterprises in China.

"The technology of electric spindle is immature, so don't apply it. Old Sun, now we are under great pressure at September 1st Heavy Industry. If we can't make our four-axis machining center famous in a short time, wait for those foreign CNC equipment factories. After exporting five-axis machining centers to China, our pressure will be even greater. Since we can’t compete with them in a short period of time, we will at least occupy a huge market in the four-axis machining center market. Share, otherwise we will all lose the high-end market..."

Once the five-axis machining center enters China, China's CNC equipment will once again be downgraded.Even if the precision level produced by Jiuyi Heavy Industry is high-end in China, 100% will drop to the mid-range.

The four-axis machining center they produce can be ranked at the lowest end of high-end equipment.

"Situ predicted with me that it is very likely that Japanese companies will have five-axis machining centers at our domestic international machine tool exhibition this year. Japan has been seeking to export to China, but it has not been approved by the government..."

The entire senior management of the Jiuyi Group has such concerns.

The production technology of China's CNC equipment has developed too fast, and Japan is the least willing to see it.

Just like at the beginning, just as Jiuyi Heavy Industry developed a two-axle two-axis CNC car with independent intellectual property rights, Japan began to export low-end CNC car manufacturing technology to China on a large scale; After the linked CNC milling, they began to export machining centers and CNC milling production technology to China on a large scale.

Jiuyi Heavy Industry has the production technology of the four-axis machining center, and Japan is most worried.

Because of geographic relations, China is their largest market.

Before the emergence of Huadu CNC, the CNC system manufacturer, Japanese FUNAC, Mitsubishi and other systems accounted for 70% of the Chinese CNC system market!After the flower count appeared, the Japanese CNC system quickly shrank by less than 40%, while the European and American systems shrank to less than 20%.With the rise of a large number of Chinese CNC equipment manufacturers in the past two years, Huashu's market share has further increased.

The loss of the CNC system does not make the Japanese feel heartache.

Even if the Chinese have a numerical control system, they cannot produce high-precision numerical control equipment.

The profit of CNC system is far less than that of CNC equipment.Especially in high-end CNC equipment.The production cost of a four-axis machining center is only a few hundred thousand, but in China, it can buy at least three million!

Five axis profits are even more outrageous.

The Chinese numerical control system is not good, mechatronics technology is not good, automatic control is not good, and even the most basic electronic and mechanical technologies are not good!

But now with the rise of Jiuyi Heavy Industry, the Japanese don't think so.

They must completely prevent the rise of Jiuyi Heavy Industry, otherwise, once Jiuyi Heavy Industry masters the production technology of the five-axis machining center, they will completely lose the Chinese market.

The low-end market profits are too thin, and they voluntarily give up; the mid-range market profits are not low, but with the establishment of Jiuyi Heavy Industry, a Chinese national enterprise that has a very good relationship with the government, and Jiuyi Heavy Industry also disseminates production technology to many production companies across the country. The processing centers made by the Chinese themselves are constantly squeezing their market share...

The main profits of Japanese CNC equipment manufacturers in mainland China are now derived from the export of high-precision three-axis machining centers and four-axis machining centers to China. Now that Jiuyi Heavy Industries has manufacturing technology, the Chinese government absolutely Will not hesitate to support Jiuyi Heavy Industry, even if the accuracy of the equipment produced by Jiuyi Heavy Industry cannot be compared with them.

In order to prevent Jiuyi Heavy Industry from getting closer to the five-axis technology, it must take away China's orders.

"Yes, it is very likely that not only Japan, but also European and American production plants, will come to China to exhibit some of their low-precision five-axis machining centers, and release the blockade on the Chinese market. The country is willing to see that China has its own five-axis production capacity..." Yun Fei sighed.

"Should not be so fast? Back then, the Germans quietly bought us four-axes, and it took several years to fully release them! Moreover, their ultra-precision equipment is still embargoed on us, just take theirs. Let’s talk about the four-axis CNC machine tool. We have talked about materials on September 1st for so many years. Isn’t Dirk also unwilling to sell to us?” Sun Lin was a little surprised.

They only speculated that the Japanese would have a small amount of five-axis exports to China, but they did not expect that Yun Fei's guess would be so bold.

"What hasn’t happened, no one can tell. After all, at the 1995 exhibition, the Ministry of Machinery announced that we would start delivering four-axis machining centers to the military in 2008... No matter what they do, we We must adhere to our own development direction and our research investment, otherwise, we can only look up to the survival of leaders like us like the Northeast Plan and the Capital Plan..."

The slow-moving wire-cutting project hosted by Deng Lanqing did not get the support of Xihu Electric Processing Institute, so I had to explore it myself, and it has not made breakthrough progress. The fully automatic flexible manufacturing system is only a semi-finished product.

The entire September 1st Research Institute is so short, and only so short, it can soar into the sky.

But no one can tell how difficult this step is and how long it takes.

Breakthroughs in technological research are impatient.

Urgency will have no effect.

"Mr. Myron, how are we negotiating with Dirk's four-axis tool grinder?" Yun Fei was originally because Myron, an old man who has a good relationship with Dirk, went to negotiate to purchase from Germany. It should be much easier for the four-axis four-linkage CNC grinding machine to restrict exports to China in the Namibia Agreement, but he was wrong.

"Boss, there is nothing I can do about this matter. Dirk's top executives tend to export to us, but our government does not agree, plus the Japanese people in the Wasna Supervisory Committee are very focused on this, so..." When Melan heard Yun Fei's question, he shrugged and smiled bitterly.

After arriving in China, he helped Jiuyi Research Institute to order a lot of research instruments from Germany, and many of them were instruments that were clearly embargoed on China in the Wassenaar Agreement. For this reason, he was even warned by the German government. .

If it were not for his 3% stake in the Jiuyi Group, he would not have been able to get out so easily.

Foreigners don’t even know that the Jiuyi Research Institute does not belong to the Jiuyi Group...

They cannot understand many things in China.

"It's okay, I just ask. After all, the production efficiency of our manual tool mills is too low..." Yun Fei knew that the old man Myron paid for the entire group company, and the equipment used by the entire Jiuyi Material Factory for technical upgrades was The old man Myron brought his consultant team from Germany to China, and it even contained embargoed equipment such as a three-axis CNC grinder.

Therefore, after Wheat Mobile was incorporated into the Jiuyi Group, he did not lower the shares of Old Man Myron.