Intelligent Industrial Empire

As soon as it was reported that the Jiuyi Heavy Industry Group acquired a state-owned bankrupt machinery factory on a large scale, it caused an uproar at home and abroad.

As China began to regulate the country's overheated economy in the 1990s, China's economic growth began to slow down, and China's corporate expansion was restricted.

Except for the rapid expansion of some light industries and high-tech companies, most heavy industries are shrinking their business. Now Jiuyi Heavy Industry suddenly acquired bankrupt state-owned enterprises with such a large hand. People who understand the situation a little bit can’t understand Jiuyi Group. What does this young boss want to do!

The merger and reorganization of state-owned enterprises is not shocking, after all, they are all state assets.

The large-scale annexation of state-owned enterprises by the private economy is the first in China.

Many people hope to get an official answer whether this is whether the country wants to fully release its control over the private economy or is there something else.But there is no follow-up news.The acquisition team of Jiuyi Group is still acquiring the planned bankrupt state-owned machinery factory according to the schedule.

The official of the Jiuyi Group also did not give any explanation. The brick screamers who jumped out to speak out whenever they encountered something also kept silent.

Throughout Southeast Asia, as Soros’ quantum fund blocked the Thai economy, with the help of the Chinese government who was worried about the impact of Xiangjiang, Soros transferred the main force of the offensive to small countries such as Malaysia and Indonesia, and spread to Taiwan, Japan, and South Korea. , The financial crisis sweeping across Southeast Asia is still breaking out.

Under such circumstances, the economies of most countries in Asia have been hit, and a stable Chinese market has become the only way out for many countries’ enterprises from the financial crisis.

Jiuyi Group has made such a large-scale acquisition when many countries have increased exports and purchases to China. It has clarified that countries and companies that export large amounts of machinery and equipment to China, such as Japan, South Korea, and Singapore, announced that this is what they want Stop you!

"Peng, the Jiuyi Group is doing such a big move now, should we just let it go?" As soon as Wang Ziqing saw the news, he hurriedly found Peng Zhi.

From the very beginning, many CNC equipment companies that have entered or are about to enter China know that Jiuyi Heavy Industry will definitely have a strong response to their actions. However, with such a large market in China, with its production capacity, it cannot Occupy all.

Unsurprisingly, Jiuyi Heavy Industry made a massive price cut to stop them.

But they didn't expect that after the price cut of the Jiuyi Group, there would be even bigger players.

"Wait, we are also gaining a foothold in the mainland. Now the price cut of the CNC equipment of Jiuyi Heavy Industry has little effect on us. Their expansion of production scale also has little effect on us. What should be anxious now is those Korean and Japanese companies that have not started yet to set up factories in China!" Peng Zhi calmly said to Wang Ziqing.

At the beginning of the two companies fighting separately, they were forced miserably by Jiuyi Heavy Industries. After the merger, the management costs of the two factories have dropped a lot, and the technical level of Taiyu Precision Machinery has also improved a lot, even in the processing center. The above competition can't compete with Jiuyi Heavy Industry. In the low-end CNC car market that Jiuyi Heavy Industry plans to give up, it has seized a lot of the market.

It is precisely because of this that they barely gain a foothold in the market, and now their processing centers have begun to erode the market share of Jiuyi Group.

"Aren't we going to be more affected? Their four-axis machining center has already begun to be delivered to the Continental Army. Now that the expansion of such a large production capacity should expand the production of low-end products, and further price reductions are inevitable... …" Wang Ziqing felt too aggrieved.

If it weren't for Jiuyi Heavy Industry, how could he agree to let Taiyu Precision Machinery be annexed by Wanyou CNC!

"That's something for the future, at least for now, Jiuyi Heavy Industry will not cut prices anymore, not until they have formed new production capacity." Peng Zhi shook his head.

"Then let's just watch the fire from the other side and watch them fight the Japanese?" Wang Ziqing's face twitched.

Now he only holds more than 20% of the shares of the merged company, and has no say in the company at all.

"The Japanese are not fools. The Koreans and Singaporeans have lost a lot in this financial crisis..." After Peng Zhi finished speaking, he looked at the scenery outside the window with his back on his back and stopped talking.

Wang Ziqing could only talk for a while.

It's okay to pay attention to the stock market!

The CNC equipment factory has money to make money, but waits for dividends and loses money, so let Peng Zhi go to plug the hole...

"Li Sang, why are you here now?" Saburo Onomura waited for almost half an hour before Li Mingshan came slowly with his secretary, which made the Japanese very angry.

Li Mingshan smiled at Saburo Onomura: "Ono-kun, it's not that I'm late, but you are too early..."

"You..." Saburo Onomura almost jumped up, but he didn't stop the people around him.

The heads of Japan's Mitsubishi Corporation China Office and Mazak China Office jointly issued invitations to Li Mingbo of South Korea, Song Hui of Singapore, and Peng Zhi of Taiwan, inviting them to discuss how to deal with this move of Jiuyi Heavy Industry.

Taiwan’s Peng Zhi directly rejected their invitation, citing that he wanted to negotiate an acquisition in Italy.

Zhongsen CNC from the Song family in Singapore is the only CNC equipment manufacturer in Singapore. It entered the CNC equipment industry later than all walks of life in Taiwan, but the strength is not too bad, or else there is no intention to enter the Chinese market to eat fat.

In the past, many second-hand CNC equipment in Europe entered the Chinese market through Singapore. Singapore also saw the huge profits in the transit trade, and then developed it.

However, due to the late start, the entire Asia-Pacific market is occupied by CNC equipment manufacturers in Japan and Taiwan, and they have no big chance at all.

The blank Chinese market is what they value most.

If it had not been for the rise of Jiuyi Heavy Industries, the Taiwanese factories had not even recovered their investment in mainland China, they would have already entered the Chinese market.

Although Singapore is also a Chinese country, they do not have a strong sense of identity with China, and they often embarrass the Chinese government in the international arena. They can almost be said to be the vanguard of official forces that hate the Chinese government.For these reasons, they were able to obtain various advanced technologies and advanced equipment from Europe and the United States.

And once you want to benefit from China, you start to talk about the same kind of homology. At the critical moment, when it is time to pit China, you still have to pit China.

"Okay, Ohno-kun, now that everyone is here, let's just say it is. If the Taiwanese don't come, can our business alliance not be established?" The relationship between Japan and South Korea is very surprising. People are hostile to each other, and even the government will scold their mothers in public, but they have extensive cooperation in economic, military, and political aspects.

"Let’s get together today to discuss how to deal with the blockade of September 1st Heavy Industry. Now that the international community has begun to relax the technical blockade on China, this will have our chance..." If there is no one to mediate, the Japanese and South Korea People can even keep fighting.

If Li Mingshan and Onomura Saburo were to quarrel, today's business would be impossible.

"Yes, the Wasna Supervisory Committee, in view of the fact that the Chinese already have the production technology of the four-axis machining center, they will be able to have the production technology of the five-axis machining center in a maximum of five years or even three years, so it agreed to some companies The proposal to export low-precision five-axis machining centers to China..."

"What does this have to do with us? Mr. Ohno, we are a company that produces two-axis CNC cars and three-axis machining centers. The Wassenaar agreement does not seem to stipulate that three-axis machining centers cannot be exported to China, right?" Li Mingshan Japan is the most annoying.

Every year, the high-end machining centers with four or more axes exported from Japan to South Korea can pit Koreans a lot of money.

Li Mingshan had long wanted to introduce the production technology of four-axis machining centers and five-axis machining centers from Japan, but the Japanese were not willing to sell the technology to them.

How many high-end processing centers do you want to buy? We sell them all. Want to buy production technology?

No way!

This made Li Mingshan very painful.

"Ohno-kun means that since we are all planning to establish production plants in China, we should form an alliance to concentrate our sorrows and compete with Jiuyi Heavy Industry for China's CNC machining center market..." As a half of the high-end market in China According to Tojo Tojo of Mazak's China Office, these companies only need to attract the attention of Jiuyi Heavy Industries in the low-end market.

The higher the technological development of Jiuyi Heavy Industry, the greater the pressure on them.

Either put more high-end equipment into China, or lower the price of equipment exported to China.Apart from this, there is no other way.

Otherwise, their market will gradually be snatched away by Jiuyi Heavy Industry, which has production technology.

Now the high-end four-axis machining center exported to China, the price they say is what the price, the Chinese even have no room for bargaining.Not only their equipment from Japan, but also other countries exported to China, as long as China can't produce them, they are all sold at one price, and they never accept bargaining from the Chinese.

Who told them that the Chinese cannot produce it by themselves?

But now it doesn’t work. For a four-axis machining center, they say 3 million, but the Chinese give it 2.8 million, don’t you sell it?Let's go to Jiuyi Heavy Industry!

The specific quality parameters of the four-axis machining center produced by Jiuyi Heavy Industry will not be announced until the China International Machine Tool Show.

Although I don't know what the price of the four-axis machining center delivered by Jiuyi Heavy Industry to the Chinese military is, everyone knows that it will definitely not be higher than theirs.