Intelligent Industrial Empire

Everything is guided by the market!

This is the survival of any company.Only by catering to the market can success be achieved.

Of course, this refers to those enterprises that need the market to feed themselves, and many state-owned enterprises do not have this problem.For example, those military industry companies, such as those researching atomic bombs, fighter jets, and aerospace technology, are all national actions.

There are very few countries in the world that have atomic bombs, and there are many countries that want to own them, but it is impossible to sell them on the market.Otherwise, the whole world will be in chaos, maybe human beings will perish because of this stuff.

"Yes, Yunfei's words are right. Since we are a market economy, we should be guided by the market. Only when the market is recognized can enterprises be qualified to survive." The old man agreed with Yunfei's words very much.

It is not because Yun Fei said that he would have any bad opinion of him, thinking that he was in the eyes of money.

"On the market, three-axis machining centers are the most widely demanded. Such equipment is not expensive. Most of the machining operations and machining accuracy can be met. The demand for four-axis is much lower. And five-axis In the processing of civilian products, there are not too many products that require such processing capabilities. Most of them are military products, such as aerospace, precision instrument manufacturing, etc., with high research and development costs, slow recovery of funds, and the price of a piece of equipment can easily reach thousands. Ten thousand, without certain strength, I would not dare to play with such equipment. These customers are mainly state-owned enterprises and those large private enterprises. At present, the orders for the five-axis machining center of Jiuyi Heavy Industry are all from the 132 factory. , Large state-owned enterprises and military industrial enterprises like Erzhong. The minimum price per unit is 12 million, the production cost is about 4 million, and the research and development cost is almost 8 million..." Yunfei has never worried about his profit Reveal it.

Five-axis linkage is currently in China, and there are basically not many options.

Because foreign countries will never export high-end top-level machine tools to China.Those garbage machine tools in Japan each cost 15 million, and they are still unable to carry out heavy-load cutting. The machining efficiency is relatively low, and the accuracy is also low.

It’s not that Yun Fei didn’t want to set the price to 15 million per unit. He wanted to grab the orders from the Japanese and to get orders from the military that had no relationship with him as close as before, and he offended too much. Lao’s state-owned machinery factory's order can only partly give away the benefits.

Now Jiuyi Research Institute has announced in advance that it has developed the world’s top machine tool with five-axis and five-linkage. Foreign five-axis will flood the Chinese market on a large scale. This is completely achievable. The Wasna Agreement is now being China's continuous scientific and technological achievements are torn apart.

China is the largest market in the world, but it is also the biggest enemy of Western countries.

Every country is worried about the rise of China.why?Because they have bullied China for hundreds of years.The Chinese are the most able to endure these humiliations. They have not seen that Japan is about to destroy China. In order to vigorously develop the domestic economy, they are still fighting with the Japanese?Even continue to spend huge sums of money to introduce some junk second-hand equipment from Japan?

Once, the rise of Emperor Wu of the Han Dynasty drove the Huns to Europe, and the whip of God almost destroyed the entire Europe!

These are all bloody lessons.

In order to reassure the entire world, the Chinese continue to disarmament, and one cut is millions!The ancient Chinese knew that soldiers were expensive and not too expensive.The Chinese are spending the originally small military expenditures on more elite troops!

Therefore, because of this, even after the disintegration of the former Soviet Union, Lao Maozi joined the Wassenaar Agreement and worked with the whole world to block the technology against China.

However, once the Chinese have these technologies, it is obviously meaningless to block the export to China. If exports to China are blocked, the Chinese will have more research funding. How can they be contained?China has one-fifth of the world's population, but there is no super technology to match it.

If we have such technological capabilities, who can contain China?

Not in the United States, not in Europe, and even more not in Russia.

As for Japan?How can such a small country contend with China when the Ministry of Science and Technology does not have an advantage?Is it shameless to use them?Or use their love action art movie that invaded the entire world?Is this a joke?Once it provokes China, which has powerful technology, the medium-range missiles that the Chinese stockpiled can completely plough the whole of Japan.Americans want to interfere?

When is the Chinese strategic missile joking?

Maybe, the Chinese directly blasted American Washington to ruins.

Of course, all of this is based on the fact that a huge China has the powerful technological strength of the United States.

Therefore, no one wants to see such a China.

Five-axis machine tools appear on the Chinese market on a large scale, and this is no surprise.

"Through years of research, investment of more than one billion yuan, and the efforts of our researchers day and night, the three-axis machining center has developed to 19 models in three accuracy levels: ordinary, precision, and ultra-precision. The highest speed of the high-speed machining center Reaching 80,000 revolutions per minute, a fast moving speed of 120 meters per minute, and a fast cutting speed of 60 meters per minute, which is a bit worse than foreign counterparts, but it is definitely the first place in China!" When looking at the place where the three-axis and four-axis areas are handed over with interest, a high-speed machining center that is only two meters high and has no protective cover and is running at high speed and idling, Deng Lanqing introduced to the old man.

The price of such equipment is also very high, mainly for super processing of super precision parts.

Currently, only the United States, Germany, and Japan have the ability to produce such equipment, and China is undoubtedly the fourth.

It is not much different from an ordinary three-axis machining center, the only thing is that there is basically no sound in the operation of this equipment.

"What is the highest foreign country?" The old man asked with a look of difference.

Such outrageous data is actually worse than foreign ones?Is this a joke?The speed of 80,000 revolutions per minute is more than 6,000 revolutions per second on average, which is simply unimaginable.As for the moving speed and processing speed, the old man who didn't understand naturally chose to ignore it.

Luo Feng, who was staring at the old man with excitement, did not expect the old man to ask him a question. He did not rush to answer, but turned his head to look aside Deng Lanqing.

Seeing this unshaven middle-aged man staring at Deng Lanqing, everyone turned their eyes to her.This immediately left Deng Lanqing speechless, and said with a wry smile: "Lao Luo, what do you say to you..."

"The maximum speed in foreign countries is 120,000 rpm, but this maximum speed should not be used. During the processing, it is estimated that the highest speed can only be used at 80,000 rpm. And ours can maintain a long time of 72,000 during the processing. Every minute..." Luo Feng's growth is quite fast.

After all, I bought it back for a million.

"What about accuracy?" The old man who has never eaten pork or has seen pigs run naturally knows what is most important to measure a processing center.

The higher the accuracy of the equipment, the higher the processing accuracy that can be achieved.

"About 14 to three-sixteenths of hair..." Luo Feng thought for a while to answer.

Everyone was stunned.

They have always heard the most intuitive numbers and the least understood professional units. They have never heard of using fractions of hair as parameters like this!For a time, everyone was thinking about how many fourteen molecules are one and three-sixteenths of the hair strand.

The old man was also stunned.

However, he quickly pulled out one of the completely white hairs on his head and moved forward to see how much it was.

Yun Fei suddenly couldn't laugh or cry.

Luo Feng is also really a bit weird.

"It’s about 0.005mm. This is the machining accuracy, and the design accuracy is 0.001mm. It is basically invisible with the naked eye. Such equipment is mainly used for the super processing of some ultra-precision parts. That is to say, the cutting is in the material Inside the molecule. This one is specially customized by the Rongcheng Optoelectronics Research Institute, and the price is 12 million. This is still the cost price..." Deng Lanqing knows that no matter what these people think, it is difficult for these people to have an intuitive understanding of this.

Twelve million, it seems that the price is very high, but converted into US dollars, it is less than one hundred and fifty dollars.

And for foreign exports to China, such equipment is basically embargoed. Even if it is sold, it will cost the Chinese at least US$2 million.The price abroad is only about one million dollars.There are not too many domestic units that need such equipment, but not without them.Otherwise, the Jiuyi Research Institute would not accept this business at such a low price.

This is equivalent to the other party giving research funds to the Jiuyi Research Institute to carry out this project. They don't want anything except a piece of equipment.Jiuyi Research Institute has gained technology and research experience.

The NC Machine Tool Research Institute of Jiuyi Research Institute has been researching electric spindles for a long time to obtain higher spindles.

Yunfei once set a goal for them to be 180,000 revolutions per minute!

This is a statistic that makes all Chinese feel hopeless.Yun Fei knows that foreign high-speed machining centers have reached such ultra-high speeds.Although it is not used in actual processing, these technologies can be used in some military industries!

"As long as the tool is not worn, the surface quality and accuracy of this equipment is better than that of the most precise grinder..." Super processing is far from the reach of ordinary equipment.

Yun Fei didn't tell Deng Lanqing that if he knew that the Jiuyi Research Institute had such a heaven-defying equipment, the old bastard Huang Qiaosong of 132 would definitely come here again to rob.