Intelligent Industrial Empire

"What can I do if I don't do this?" Yun Fei couldn't laugh or cry when he heard the unfinished words of the old man.

Does this old man think this is the aunt of the vegetable market scolding him!

"Master, let's go, let's go to the area of ​​the front five-axis machining center. Even if they want to debate or something, they can find another time. Otherwise, it will delay everyone's time..." Deng Lanqing has always been better than Yunfei Even more careless of these officials.

If the old man came here, if it hadn't been for Yun Feiqian's warning, she would never have acted as the narrator.For her, with all this time, it's better to spend time on robotics research, and maybe a Transformer will come out.

"Yes, Dad, it's not too early now..." People always turn towards children as they get older.These performances of the old man are not the former national leaders at all, but just an ordinary old man full of curiosity.

Seeing that there is no good show to watch, there is no quarrel, the old man can only clean up the mood of watching.

"Yun Fei, where did you dig this guy?" Luo Feng, the middle-aged man, left a very deep impression on the old man. In the eyes of the old man, this guy can at least be regarded as a talent.It is naturally impossible for Yunfei's Jiuyi Research Institute to cultivate such talents in a short period of time.What's more, Yun Fei's digging in the corner is really very criticized.

Seeing the smiled eyes of the old man, Yun Fei glared fiercely at the old man who suggested that his company was digging people everywhere, and then smiled and explained to the old man, "Master, you have wronged me with this. Luo Feng, this The guy was originally just an ordinary CNC technician in the 132 factory. In the past few years, the benefits of the 132 factory were not good? Huang Qiaosong kept borrowing money from us. The money from him is difficult to recover, so let’s not borrow. After that, he began to use some of their idle personnel to do business with us. It is this guy, he actively asked for one million to sell to me..."

A dead fellow is not dead.

Anyway, Huang Qiaosong's old thing is about to retire now, that is, he is shameless and always depends on his position and is unwilling to retreat. Even if he does something, the old man will not do him anything.On the contrary, if I told the old man to dig people to 132 factory, it would be strange to be able to make myself better.

The J-10 of Factory 132 is already being produced in small quantities and will soon be deployed.

What is Jianshi?That is the sword of the country!

If Huang Qiaosong’s shameless old man met the old man with a dark cloud, he said that because Yun Fei is always digging their corners, the progress of various researches is very slow and it consumes more research funds, the consequence is not Yunfei can afford it.Don't doubt that the old man Huang Qiaosong would not do such a thing, because Yun must be engaged in aircraft engines, and the old men of the 611 Institute are now Yun Fei's most greedy objects.

"So, this Luo Feng is just a liar, not worth a million?" The old man asked Yun Fei suspiciously.In his impression, Yun Fei seemed to have never suffered such a big loss, or he would have hit the door long ago.

"It's not. Luo Feng's value is not measured by money. I don't know how his brain is constructed. This guy is basically very proficient in mechanical, electronic, and computer-related technologies. Otherwise, he would not propose such a project. Of course, the purpose of our research institute preparing this project is not to study perpetual motion machines, but for the mechanical technology and energy technology related to the research process. It can be extended at that time. Many related projects, such as new energy hydrogen-powered engine technology, such as energy efficiency improvement technology, precision machinery manufacturing, automatic control, etc..." Can the current Luo Feng be measured by price?

Can't.

Originally, Sun Lin and Situ Heyun were planning to let Luo Feng take over the duties of the dean of the research institute. However, this middle-aged man rarely did research before. Although he had a strong talent, his foundation was not very good. Let Luo Feng himself be able to study in any project team in the research institute, and they will not discover Luo Feng's talent.

And Luo Feng himself is not willing to do management.

"So, you still take advantage of the 132 factory?" The old man stared at Yun Fei dissatisfied.

"Uh, I can't say that. At least when I got him back from the 132 factory, he could only be an ordinary mechanical engineer. The most attractive part of our company is that it can give everyone a show. The stage, how big his heart is, we can give him as much stage..." Yun Fei is bragging here.

This also proves from the side that Yun's Holdings is different from other companies.

When the old man heard Yun Fei's words, he stopped talking immediately.

State-owned enterprises and national scientific research institutes have lost a lot of talents over the years. Many people are either dug out by those foreign and private enterprises, or started their own businesses. The father naturally knows the reasons for this.He has retired for so many years, even if he is worried, there is nothing he can do about it.

"This area is the research area of ​​5-axis CNC machine tools. It currently covers an area of ​​2,000 square meters, and it is also in the direction of both heavy-duty machine tools and ordinary machine tools. The main research in this area is to improve performance." The four-axis linkage machine tool inside, the old man did not ask too much, nor did Deng Lanqing give too much introduction.

Five-axis is basically the integration of two ways of four-axis linkage machine tools.

Otherwise, it would not be so easy to move from four-axis linkage to five-axis linkage.

In the international division of CNC machine tools, those with four-axis linkage are all high-end machine tools, which is not unreasonable.Most of the research institutes in China are stuck here.As long as the technology of the four-axis linkage machine tool is solved, it will not take long to enter the field of five-axis.

Yunfei is unwilling to share the four-axis linkage manufacturing technology because of this reason.

"At present, many countries in the world have the manufacturing technology of five-axis CNC machine tools. The manufacturing of five-axis machining centers in small countries like Spain and Italy is not very good because of technical problems, because the prices in the international market are falling. Originally, they used price advantages to attract production plants in small countries in Latin America, Asia, and Europe. At present, they are basically facing the danger of bankruptcy..." Yun Fei explained the doubts on his face.

Everyone knows the importance of these equipment, but it does not seem to be much different from the four-axis next to it. The five-axis in the area of ​​heavy machine tools, in fact, should be said that turning and milling meet the machining center more accurately.

These small machines can't see anything when they are not being processed.

"These are five-axis machining centers?" The old man has never seen what a five-axis machining center looks like. Seeing that these are not much different from the equipment in the nearby area, especially compared to the four-axis machining center. If there are some accessories inside the working area, it is naturally confused.

"These are only five-axis machining centers under research, which are divided into various functional systems and parts. Only the one over there is a vertical-horizontal dual-spindle machine with a length of five meters, a width of 1.8 meters, and a height of 1.6 meters. Five-axis is considered as a system integration. This is a turning-milling composite machining center customized by Erzhong Group for machining turbine shafts and turbine discs..." Deng Lanqing pointed to the most massive piece of equipment and told him.

Jiuyi Research Institute has now begun to accept the research business of special equipment customization.There is no other way. The research institute is launching more and more projects, but the fund supply is fundamentally the only way to do it.

"At present, our five-axis technology is not too mature, but it can meet most of the requirements of market users. The five-axis machining center we researched is mainly the woodworking machine with the most market users, that is, the pursuit of high precision. A light five-axis linkage machine tool with high processing efficiency but unable to process large parts. The double-customized five-axis machine is the first heavy-duty five-axis machining center we researched..." Deng Lanqing did not introduce the five-axis work to the old man Principles, and did not introduce those aspects of their research.

Even if she introduced it, the old man couldn't understand it.

As for the technicians who follow, no matter how much they want to hear this detailed introduction, Deng Lanqing will ignore them.

The old man originally came here to see the five-axis machining center that restricts the development of the entire high-precision equipment manufacturing industry in China. If it weren't for the visit that would let him know the most intuitively, Deng Lanqing would naturally not give a brief introduction like this.

There is no difference between five-axis and three-axis after the guard on the outside of the machine tool covers the inside.However, the workbench inside and the internal layout are so different that people who are not experts can not see it at all.

Each research area is marked with a yellow line. Even the old man cannot step into the yellow line area and can only watch it from the aisle outside.And it is not like the four-axis and three-axis in front of the large number of entities placed in it, only some components and system integration, the most are the computers and researchers surrounding these components and system integration.

"Isn't Sun Lao here? Where's the people?" Sun Lin, the old man, should be here now, but Yun Fei didn't see anyone at all.

Some things may be easier for Sun Lin to explain.After all, Sun Lin is good at this. Deng Lanqing has a high IQ and talent, but he is not good at introducing him to people who don't know anything about five-axis machining centers.