Intelligent Industrial Empire

In fact, the reason why Yunfei used this to test the performance of the equipment was not for other reasons, but just to flatter his father.

Theoretically speaking, the best job to test the performance of a five-axis machining center is not to engrave the human head. This is a trivial matter for a powerful five-axis machining center.There was once a Japanese video showing the performance of their five-axis machining center on the Internet. It used the five-axis machining center to process motorcycle helmets, and it was processed in one go!That is much more difficult than this one.

If the five-axis machining center developed by the Jiuyi Research Institute can reach such a level, Yunfei will definitely not hesitate to let the publicity department record this, and then put it in the video on the Jiuyi portal, right Everyone showed it off and told them that what can be done abroad can be done at home.

In this way, all the people of the country also followed up and exaggerated.

Unfortunately, it is estimated that it will take many years to reach that level.At least now the five-axis linkage of the Jiuyi Research Institute is unable to make it very precise, which makes people feel tall as soon as they look.

When the old man saw this, not only was he not happy, his face began to be covered with clouds.

"Yun Fei, such a country's heavy weapon, you actually use it for such boring things!" The old man's voice was filled with frost, and he immediately made his face full of excitement surrounding these stations faster or slower. The main shaft kept swinging at an angle, and the smiles on the faces of the people with the heaven-defending artifact carved with the old man's head at an increasingly larger swing angle stopped abruptly.

These five-axis machining centers all use high-speed milling, high speed, high cutting speed, and the amount of snacks, so the noise is not too much.In addition to the small amount of tool wear, the fastest processing speed of the aluminum statue is about to be completed, and the copper material is only more than half completed, and the stainless steel has not even been roughed yet!So the sound is very small.

The old man's quiet voice reached everyone's ears.

"Dad, this is Yun Fei's heart. Besides, they are also doing this to test the performance of the machine tool and give you a gift by the way." Seeing the old man's reaction, I naturally know why he is.

Such advanced equipment was actually used by Yun Fei for these boring things.

Although Japan is now exporting five-axis machining centers to China, because the price is not proportional to the machining accuracy, only a small amount is purchased in China.If the Japanese had exported such a five-axle to China two years earlier, and could catch up with China’s remodeling, it is estimated that the government would not purchase on a large scale, and the military would have to stretch its neck and slaughter it.After all, this thing is too important for aerospace, precision machinery manufacturing, molds and other fields.

The former Soviet Union acquired a five-axis machining center from the Japanese, and as a result, the performance of their submarines has been improved by several levels. The entire NATO countries have a headache, otherwise the Toshiba incident would not be so big.

Hearing what Aunt Deng said, how could Yun Fei not know why the old man was so upset?

With the increasing scale of Made in China, Made in China has spread all over the world.However, Chinese manufacturing is the least profitable labor.As a former leader who wants to promote the development of China's science and technology, he saw Yunfei use these top-level equipment for these things. If it is used to produce many parts of aircraft parts that require such top-level equipment, maybe the 132 factory can be as early as possible. A J-10 has been produced in a few days...

"Father, we are not doing this kind of processing experiment because you are here. We have been cooperating extensively with domestic CAXA software companies, and they have been working on developing CADCAM computers that are compatible with us. Aided design software. This is our own design and programming software in China, and we naturally have to help them experiment. Moreover, although these three-axis research has been successful for several months, we must ensure that no major problems will occur in the hands of users. Quality is the way to survive for an enterprise. What's more, most of the materials processed by the five-axis machining center are very expensive..." The five-axis machining center, at present, is mainly used for military industry. field.

This is the case regardless of whether it is foreign or domestic.

The most top-level equipment and the most top-level technology are often given priority for military use, and then the private sector.

China lacks a large number of five-axis machining centers. Although they think that the bigwigs are not pleasing to the eye, and China can produce domestically, foreign countries will definitely relax the export of top equipment such as five-axis machine tools to China in order to suppress China. The market of local enterprises has hit the living space of Jiuyi Heavy Industry, the leader of China's CNC machine tool industry.In any case, it is impossible for China to not give part of the orders for Jiuyi Heavy Industry.

The first batch of customers for the five-axis machining center researched by the Jiuyi Research Institute are domestic military enterprises, processing the top-notch weapons and equipment in China. If the equipment purchased from Jiuyi Heavy Industry has problems and the progress is delayed, this The consequences do not want to bear.

Even the 132 factory was anxious for a five-axis machining center, but Yunfei did not deliver one. The first batch of twenty five-axis machining centers have not yet reached the final assembly process.To be able to improve performance even higher, Yunfei will not save a few more money from the military to solve these problems by leaving these in the next-generation products.

China's CNC industry is countless times more fierce than in his world. The competition in that era is countless times. Whoever gets more praise from customers will get more living space.

Therefore, if these equipment can enter the market later, the trouble of Jiuyi Heavy Industry will become smaller.

When the old man heard this, he stared at Yun Fei doubtfully: "Really?"

Yun Fei nodded solemnly: "Master, you can see the operation of this machine. In order to carve this head, the spindle must be as flexible as a human arm. Of course, if our equipment performs better, our experiment will It uses processing motorcycle helmets. Today this is mainly to verify the inverse imaging function of the CAXA 3D modeling software, and the relevant preparations have been started several days ago..." Yunfei once again pulled the CP Technology that developed the CAXA software Came out.

"This is also developed by our domestic company?" In terms of software design, Chinese people have always been unable to compare with foreigners. The biggest disadvantage is that China is not a country that uses English as its official language.Computers were born in the United States, and personal computers were also promoted to the world in the United States.

In the software industry, if Chinese want to learn, they must first learn English.

Why is India's Asan stronger than China in software?Isn't it because of their language environment?English is the official language of Asan!

"Of course, this company is currently the best professional software we have made in China. Many domestic research institutes, universities and companies are using their software..." Zhengda Technology is a state-owned enterprise. You can imagine how big it is.

"A strong alliance, this is a good thing. Yun Fei, you should understand the importance of CNC machine tools better than anyone else, especially the five-axis linkage, which has been related to the national defense strategy and security equipment that foreign countries have been blocking us with technology. , Our country needs vigorous development. Sometimes, you can also use the power of the country. Just relying on the power of your private research institute is still very insufficient..." The old man has never treated these major scientific research projects in Yunfei. It is very dissatisfied to declare to the country.

He also knows where the problem lies.

There is no way to force Yun Fei to behave, so this time it is just a reminder to Yun Fei.

"The most important use of these equipment is in a very sophisticated field such as aerospace. Strategic equipment such as five-axis linkage can also be regarded as a country's important weapon. As an elderly person, I naturally hope that the country will become stronger and stronger in this area. Okay. Of course, this still depends on you. We made in China can be seen everywhere in the world, and we can only make a small profit by quantity, but foreign exports to our China, a production line, a set of their second-hand equipment, We don’t know how many shoes or clothes we need to export to make money back. China has become the world’s factory, and has become a manufacturing country, but it is not a manufacturing power..." The old man said slowly, but these words It was said without a pause.

To the old man's hopeful eyes, Yun Fei turned his head aside.

This technology allows oneself to hand it over?It's impossible, even the old man, he would not agree to this matter.The five-axis CNC machine tool technology is shared. With those bigwigs' attitude towards Yunfei, how many domestic orders can he get?Use your own technology to train your competitors, what does Yunfei do?

Yun Fei wanted to ask the old man, who has such a big face for him to suggest that he shared this technology?

Even without the support of his father, Yun Fei would never agree to such a thing.

Yun Fei is really wrong to blame the old man.After all, the father thinks more about this country.If some of the machine tool factories with relatively large scale and relatively strong technical strength have this technology, and then everyone can study it together, the results that can be achieved will definitely be much greater than that of the Jiuyi Research Institute.

The old man naturally knew that Yun Fei was very close to his own things.

If this were not the case, Yun Fei would definitely start some projects in his research institute to apply for major national science and technology projects and state financial subsidies.Because applications for these projects need to submit detailed information, they must also be reviewed by a dedicated person. For private companies like the Jiuyi Research Institute, it will definitely be more stringent.