Magi Craft Meister

Miniaturization and high output.

Each of them was set as a goal, and the two teams conducted a prototype.

At lunchtime (as advised by the Ka-chair, everyone ate lunch properly), and at about 2pm, each prototype was completed.

“Now, let's present each of our achievements. Let's start with our" miniaturization "team....... Eila, please."

Arnold, the head of the office, nominated Eila.

“Well, we pushed for miniaturization. The premise is to make it compact without losing performance. This assumes that if you increase the number of sheets to be stacked, you can reduce the size....."

Here, Eila cuts out her words for a moment, marks them with her hand, and then resumes.

"... I decided to use another method."

Oh, I heard a voice. It appears to be from Philly.

The Philistine asked Eila to check.

Is that a technique related to the characteristics of the magic circle?

Oh, that's right.

Eila, who had a picture of the planet, continued to explain, even with a little wildness.

“It started with one question." Amplification by circulation is not as effective as I thought. "

Oh, I see.

“I was a little suspicious, too.”

Siel Ajoux had such a question, too.

"So I decided to investigate again why the 'circulatory amplification' and 'hurry up and go around' are not very effective."

One of the reasons why magic is slow to activate by the magic circle is because if you don't circulate the magic circle, the magic won't activate.

“This is generally known. So why is that? Ka-chair gave us some tips on how to solve it....... Ka 'chair, please take my place."

"Eh!? Ah, ha, yes!"

Suddenly Eila shook the chair and took over the explanation in a hurry.

"W-Well, I can't use magic." Therefore, we are trying to understand the phenomenon of magic by comparing it with "science" in general. This time, the comparison was between conductivity and conduction rate. "

"Oh, that's a good point of view."

Delphina praised the idea of the Kachi.

I was also taught a technique called magic circle, so I was hooked a little bit.

Is that the base material?

"Yes, it is."

Ka-chair nodded and continued to explain.

"As Delphina also felt, the general magic tool engraves the [Magic Crystal (Magic Crystal)] with the [Magic Formula (Magic Crystal)]." However, since "Magic Crystal" is expensive, it is a magic circle that uses "Magic Formula" engraved on metal plates, leather, paper, etc. "

I noticed that there, and the caress.

In other words, the material used as the foundation of the magic circle is very inferior to the "Magic Crystal".

"I see..."

"Sure..."

"It's cheap, it's bad, but it's so inefficient..."

"That's right." I tried to measure it, but compared to the light silver foundation that I'm using now, it's only about one-hundredth more efficient than the Magic Crystal.... I don't have time for that. It's a crude number. "

"A hundredth...!" Is it that bad? "

The [Higher Output] team was surprised at the severity of this figure.

"I did think it was inefficient, but at most I thought it was about one-tenth."

"No way, even more than one-tenth of that..."

After the surprise of the "Higher Output" team calmed down, Kacha continued to explain.

"Therefore, this time, we tried mixing light silver and mythril silver at 5 percent as a way to improve the efficiency of magic power operation. It was twice as efficient as just light silver."

That's why the "miniaturization" team succeeded in reducing the size of the 10-centimeter angle, and the ka-chair was tied.

"No, that's brilliant."

"Excellent."

The leaders of the "Higher Output" team, Philly and Delphina, applauded, and the other members immediately applauded.

"There is an urgent need to find inexpensive and efficient base materials."

"... but before you do, please listen to our report."

This time Delphina started explaining.

"We are a" "high output" "team, but first of all, let me tell you the results, we can now get twice the output without changing the duration."

"Oh, wonderful."

Arnold praised the result.

How did you do it? It increased the density of the magic circle.

I see.

"If the circulation amplifies the magic effect, we can make it circulate faster by shortening its path, resulting in better output."

Here, Delphina switches the explanatory role to that of her brother Philly.

"Another added innovation is the thinning and strengthening of the foundation."

In order to increase the number of laminates, it is said that the thickness per laminate is reduced, and the laminated substrates are attached to each other so as not to reduce the strength.

"Even if I stick it together, the magic circle that I carved will be broken, so I used a space where the magic circle was not carved."

Oh, I see. It's because there are many magic circles in the same circle that you can do it.

"That's right. It's the same magic circle, so the margins are the same." That's why we were able to fuse the parts together and increase the overall strength. ”

"Well done."

The "Higher Output" team also received praise.



"Well, if we combine the results of the two teams, we can still say that we have made great progress."

Arnold came together.

"However, I think we can make it smaller and more powerful by selecting the material from both the foundation for the magic circle, its optimal cost and performance."

That's right, Chief.

Extreme story, if you build a foundation with the [Magic Crystal], it will be amazing.

That's true, but the magic formation is meaningless in terms of cost.

"No, Ka 'chair, I know that. However, in order to quantify, I would like to make only one prototype for comparison."

"That's right..."

"Therefore, please purchase a magic crystal (magic crystal) plate with a thickness of 5mm and an angle of 10cm." The quality will be good. In some cases, even below. "

Got it.

In this way, preparations for the third stage were advanced.