Magus Tech

445 Thermoelectricity

There are currently six studies conducted by Richard, namely: Mageweave, Pneumonia Fungus, Antibiotic, Spell Defense Shield, God's Blood, and Eden Energy System.

The knowledge contained in the suture monster is very helpful to the three items of "spell defense shield", "blood of god" and "Eden energy system"-if you fully master the knowledge of suture monster, the six studies can directly Half solved.

The first is the magic shield.

Richard studied the hard appearance of the four purple stitching monsters and the only black stitching monster, and separated a very special mixture from the inside.This mixture appears gray. Although the composition of this mixture cannot be determined yet, putting the mixing method in water can form a non-Newtonian fluid with excellent effects, which is better than the black non-Newtonian fluids currently used.

In this case, as long as you master the preparation of the mixture, a large amount of it can be used to improve the magic defense shield and turn the black reaction shield into a gray-black superimposed composite shield.

Then there is the blood of God.

Richard dissected many dead and frozen suture monsters, and found that the other party's heart function is very powerful, not only has strong contraction ability, large blood supply, but also has high resistance, is not easy to be damaged by outside, and has a certain degree Repair capability.

And this heart, which was originally just the heart of an ordinary person, has become this way after a series of transformations.

Although Richard is not prepared to change his heart to the same shape, if he can understand the mechanism of heart strengthening and apply it to the blood of God, it will definitely reduce the side effects and increase the strengthening of the blood of God, which is comparable to the Marquis. The blood power of the level, the duke level, and even the king level.

Let the blood of God (primary) become the blood of God (intermediate) and the blood of God (advanced).

Finally, there is the energy system of Eden.

Regarding the transformation of the energy system of Eden, Richard actually almost gave up. In his view, at present, there is no big hope for the success of the transformation in a short time.But some results of Stitch's anatomy gave him a surprise.

This matter is a bit complicated, and a little explanation:

You must know that the suture monster's power is very amazing, and it can even fly to Pandora. Richard thought that this was caused by a special structure, but in fact, because the suture monster's body has a specially strengthened energy system.

Generally speaking, human beings are not plants, they cannot carry out photosynthesis, they cannot support themselves, and they need to absorb energy from the outside.The main way to consume energy is to consume the system.In other words, energy is obtained by eating, digesting and absorbing various nutrients in food.

The energy obtained will be stored in the form of sugar, fat, and protein. When it is needed, such as anaerobic exercise or aerobic exercise, it will be broken down into ATP (adenine nucleoside triphosphate) for energy.

What about Stitches?

It is far beyond the size of ordinary people, making it difficult for the suture monster to supply energy in the same single way, so in the body of the suture monster, in addition to this energy supply system, there is another set of auxiliary energy supply system.

The core of this auxiliary energy supply system is the powerful heart of the suture monster.

The powerful heart possessed by the suture monster brings the metabolic capacity of the suture monster far beyond the average creature.For example, when a suture monster stands still, it is similar to a normal person running a marathon under the hot sun.This naturally generates a large amount of heat, which cannot be dissipated outside the body.

The reason for this is that on the one hand, the ratio of the appearance of the suture monster to the outside world is huge, which is significantly lower than that of small creatures.On the other hand, the suture monster's skin has been transformed for defense and has no sweating function. Unless the suture monster has to stick out its tongue like a dog, the metabolic heat will always accumulate in the body.

This is very deadly!

It is like the reason why human beings can become the king of all beasts, and in ancient times, they could kill all kinds of large beasts with stones and wooden sticks, because of the strong heat dissipation.You can bring drinking water and dry food in groups, chasing beasts of exhaustion and death.

If the suture monster does not solve the heat dissipation problem, then no external attack is necessary at all, and it will die a few times by itself, like a natural state with a "seven-step snake venom" negative state.

How to solve the suture monster?

The answer is that the suture monster absorbs this heat and converts it into energy-there is a layer of translucent colloid on the outside of the suture monster's organs, which Li Cha discovered when he first dissected.Originally, it was thought that this colloid had a buffering effect, just like fat, to reduce the damage to the suture monster from outside.But as the research deepened, I found that this thing is not simple.

If there is nothing wrong, this thing should be a temperature difference material.

Yes, temperature difference material!

What is a temperature difference material?

To understand temperature difference materials, we must first understand a law-the second law of thermodynamics: heat can be transferred spontaneously from a hot object to a cold object, that is, heat conduction.

A five Baidu iron block is in contact with a three Baidu iron block. The high-temperature iron block must transfer heat to the low-temperature iron block until the two iron blocks are at the same temperature.

This is like water flowing downwards under the influence of gravity, which cannot be changed before overturning the whole set of physics!

Can we use this law like wind and water?

The answer is-yes!

Imagine that there is a high-temperature wall of several hundred degrees Celsius, and next to it is a cold wall of tens of degrees below zero. As long as there is some medium between the two walls, heat will flow from the high-temperature wall to the cold. The walls are like water flowing down the dam of a hydropower station.

The difference is that the water flow can hit the turbine wheel of the hydropower station to generate electricity, and the heat must act on a special material to generate electricity-temperature difference material.

The definition of temperature difference material is: a material with significant temperature difference power generation, when the material is in an environment with a temperature gradient, it can generate current.

With regard to thermoelectric materials and thermoelectric power generation, they have actually been studied for many years in modern earth, and even formed a special subject-thermoelectricity, and summed up the "Seebeck effect", "Thomson effect", "Pearl "Post effect" and many other laws.

Using this subject knowledge, basically, as long as there is a temperature difference, it can generate electricity.

In the world, there can be no temperature difference, so it can be said that temperature difference power generation can be achieved anywhere-no fossil fuels, no wind power, no light, no cleanness, no pollution, and it is simply touching.

But then again, there is a reason why thermoelectric power generation is so good, but it has not been promoted.The first is the higher cost, and the second is the higher technological content. It is difficult to obtain suitable temperature difference materials and use them for discovery.Therefore, the place where the most thermoelectric power generation is applied is on a satellite that is not bad for money or technology, and the rest of the places use the relatively disadvantageous other power generation methods.

In this case, trying to generate electricity with temperature difference in a world like the Middle Ages is almost whimsical.

However, everything is absolute.

According to the research on the earth, some animal materials have the effect of temperature difference materials, for example... colloid in the shark's nose.

Well, the colloid in the shark's nose.

According to the analysis, in the shark's nose, there is a colloid that can sensitively sense the temperature change of seawater. A temperature change of 0.1°C will cause it to generate a significant voltage, which is then transmitted to nerve cells, so that the shark can get a signal.It is through this mechanism that sharks quickly detect the surrounding seawater environment and prey.

Now through some experiments, Richard can basically determine that a large amount of translucent colloid in the suture body is similar to the shark nose colloid.

Considering that the sharks in the whole sea have been killed, so many colloids must be able to come together. The colloids in the suture monster are obviously artificially synthesized.

To sum up so many words, that is:

The necromancer found a way to artificially synthesize the temperature difference material, adding this material to the body of the suture monster, while absorbing the heat emitted by the suture monster, on the one hand, it was used for energy conversion.In this way, the stronger the suture monster activity, the more heat generated by the metabolism, the higher the energy supply, forming a perfect positive closed loop, and achieving extremely high energy utilization.

In Richard's view, the extremely high energy utilization rate is still second. If the information left by the necromancer can be used to grasp the power generation capacity of this artificial colloid, it will be very natural.

Once you have mastered it, you can make a large number of thermoelectric generators, which can automatically generate electricity 24 hours a day, completely eliminating the energy system problem of Eden.Let the Garden of Eden enter the era of full electrification from semi-electrification. When the time comes, the electric lamps used for lighting can be used casually, and there is no need to fear the lack of electricity.