Monster Factory

Shi Yuqing returned to the operating room and asked Dr. Shi to wait another 20 minutes.

“This is ridiculous, as you yourself said, cutting machines take at least five or six hours to cut.” Another doctor stomped: “Who is to blame for delays and medical accidents? ”

“I believe him, he is a kind man.” Shi Yuqing ignored the doctor's anger directly.

Dr. Shi, the main knife, observed it again with an endoscope, and Ansi missed the palm situation: “The little girl's palms are all purple, I can only give half an hour. ”

“Squadron Leader, how many times have we done this? Can we cut it? Don't we get it?” The other two firefighters were a little hesitant, they were not afraid to take responsibility, they just watched the little girl lay on the operating table, they were so guilty, and the longer they took, the more susceptible they were to accidents.

“He said twenty minutes, we wait twenty minutes, think of it as a hope for the little girl.” Shi Yuqing believes Ye Qing, because his car was filled with advertisements for cutting machine tools, he must be more professional in cutting than their firefighters.

Just seventeen minutes after the electronic clock on the wall, there was a bang bang outside the operating room door.

The little nurse pushed the door and the young man had gone back and pushed a device that looked premium, some like the anesthesia machine commonly used in the operating room.

Little nurses can recognize this machine if they don't understand it anymore, not the so-called cutting machine.

It was too late for strict disinfection. The little nurse stuffed Ye Qing directly with a surgical suit and mask.

Squadron captain Shi Yuqing and two firefighters suddenly got stunned and rated. They quickly wiped their eyes and looked at the machine ignorantly.

This is a small, but highly complex machine. The squares are underneath with a clasp, which is composed of eight hydraulic columns, a work platform at the top, and a lot of black pipes that look sturdy.

“Didn't you say you were going to cut it with a cutter?” Even Shi Yuqing, who knew many cutting methods, also opened his chin and looked at Ye Qing very ignorantly.

“Who said I was going to use a cutting machine?” Ye Qing quickly pushed this machine to the operating table and asked the little nurse to hurry up and get two barrels of water.

“You, you, you ~ you don't need a cutter, how do you cut it?” Another doctor's angry nose is crooked: “What are you, two barrels of water? ”

Ye Qing ignored him and glanced at Anxiety.

At this time, Anxiety had closed her eyes and her expression was painful. Time had passed so long before she had the strength to open her eyes.

The nurse hastily went to fetch water and Ye Qing pulled himself out of the mechanical wire.

“I'm going to give you Cop, this mechanical device called a CNC ultra-high pressure water cutter.” Ye Qing plugged in the power and activated the control panel: “Seeing as there is no multi-stage hydraulic column below, it can pressurize the water to 380 MPa and eject it through the nozzle above the workbench, the water flow is three times faster than a pistol bullet. ”

“Cutting machines can produce enormous heat even if they can quickly cut stainless steel. Spray cooling can only lower the surface temperature and needs to be cut off for a while, it is a waste of time. ”

“High Pressure Water Cutter for complete heat free work. ”

High Pressure Water Cutter...

Everyone was completely stupid, and several firefighters had seen a high-pressure water cutter in Huaxing Heavy Industries while training in factory firefighting. But the kind of equipment that cuts hard metal, it looks very clumsy and very, very expensive.

Where's the one in front of you?

Small enough to move anywhere in the back of a sedan.

But the ultra-high pressure water cutter will definitely punch through the stainless steel cylinder...

The flow of water that even stainless steel can shoot through, what would happen if it were shot at a person?

The nurse quickly hit two barrels of water. Ye Qing Gu could not explain their doubts. After measuring the thickness of the lower stainless steel cylinder with cursor card paper, he quickly set the data in the control panel.

Yes!

If it is a traditional ultra-high CNC pressure-controlled water cutter, it is almost impossible to do so if you want to leave only a shallow layer of stainless steel cut without hurting the inside.

Ye Qing, however, is a different small CNC water cutter. This is a rare quality processing item sold in the monster factory's prop store.

It automatically adjusts the working pressure according to the depth of cut transmitted by the sensor. Be like a carving machine and cut out the desired thickness in no small part.

The height of the operating table can be adjusted. Ye Qing allows the nurse to adjust to the same height as the water cutter table, and then separates the table with a surgical cloth to prevent the water flow from splashing onto Anthony's body.

Adjust the parameters, Ye Qing gently put Ansi's left hand, along with the stainless steel cylinder, onto the workbench.

A slight motor turning sound, two fixing plates on both sides of the workbench, securely holding the stainless steel cylinder in place.

As Ye Qing presses the switch on the control panel, the ultra-high pressure water flow nozzle on the three-axis table slowly moves to the end of the centerline of the stainless steel cylinder.

There is no test knife or anything like that, accompanied by a multi-stage hydraulic column under the workbench, a little movement, the nozzle of the workbench “buzzes" ground, spraying a very fine water jet beyond the power of the human imagination.

Firefighters stared wide and in front of such high-tech, they had lost their say altogether.

And doctors and nurses, they're completely stupid, and even if they do surgery for three more lifetimes, they can't imagine that industrial high-tech machining tools can be used to save lives on the operating table.

The loud noise made several nurses unable to help but cover their ears.

The scene in front of them is memorable for the rest of their lives. Even firefighters dare not try high-hardness stainless steel. Under the shooting of this high-speed water jet, it becomes harder than butter.

The water jets through a precise straight line with fine water balls splashed around, leaving a deep cut groove.

The firefighters' hearts spoke of their throats, their eyes staring dead at the ultra-high pressure current, praying constantly that the current should not shoot through the entire stainless steel wall.

Ye Qingyin is not worried because this rare quality water cutter automatically adjusts the working pressure based on the depth of cut transmitted by the sensor.

Doubting its ability is tantamount to questioning the strength of the monster factory.

There seems to be no unprecedented water flow, in fact, the pressure amplitude has been adjusted by the CNC procedure several times during the work.

Three minutes later, the first knife was fully walked by a CNC water cutter, and several firefighters dared forward, gazing at the depth of cut.

Shh...

Three-sound air pump, straight cut under dents, only a sheet of paper thick stainless steel wall, connected to both sides. This thickness, presumably the one with a lot of energy, was ripped right off.

In the Armed Police and Special Police Unit, there is a very performative job called tearing the basin.

That stainless steel basin is much thicker than this.

Ye Qing adjusted the machine, ready to cut the second knife.

Now, no need for Ye Qing to make a sound. Everyone backed aside and looked at Ye Qing with admiration and admiration.

Several little nurses are losing their minds, and they find this young, golden man attractive to fall into at work.

A fierce “buzz ~ buzz ~” water knife cut sound, breaking their imagination.

Three minutes later, the second cutting dent was cut out. After Ye Qing pushed the water cutter away, the firefighter who had already jumped to try it rushed over immediately.

The two pliers clamped the stainless steel cylinder and didn't feel too hard. The stainless steel cylinder was pulled apart in a whiff.

Perhaps because of the sudden disappearance of a great sense of oppression, Ansi's left hand, full of blue and purple, moved unconsciously.

She had a wound in the palm of her hand, which was estimated not to be deep, at which time the bleeding had stopped.

There are abrasions on the back of the hand and fingers, and the outsiders know it's not serious.

Removing the winch pressed against her hand, Dr. Shi squeezed her palm and finger bones carefully, full of surprises: “Great, the bones aren't broken. Take a CT at once to see if there's a bone fracture. ”

“Pa Pa Pa ~” a small nurse clapped excitedly and looked at Ye Qing like a hero.

“Pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft, pfft

“I apologize for my stupid behavior.” The doctor who was constantly worried about becoming a medical accident and affecting his future walked forward, a little ashamed: “You gave me a good lesson today, what technology! ”

“I also want to apologize.” A firefighter walks up to the front: “Before I said to myself that you were an idiot and pushed a ghost in. ”

“I took my breath and put my clothes on the ground, I never knew that the cutting job could be advanced like this. ”