Monster Factory

A diamond in the hands of a jewellery dealer is a stubborn treasure that has been struck “diamond forever” and can squeeze a man's waist bag dry.

But in fact, diamond finishing is not very useful except for the "jewelry” attribute.

Natural diamonds are rarely used in industrial science and technology.

Because almost everywhere it needs to appear, it is replaced by synthetic diamonds.

With industrial technology that uses high-energy lasers to vaporize diamonds and vapor deposits on monitors, Giant Beast Industry is one of the first and the industrial use of diamond ore to find a new job.

Unlike previous techniques of coating on dream monitors, the permeability of the coating after vaporization of the original drill is sufficient to give the dream monitor sufficient excellent imaging results.

Imaging lenses with holographic lenses are only the size of a matchbox, and if you want to get the same angle of view in the real world through a matchbox size imaging lens, you have to upgrade the coating technology upwards and upwards.

It is extremely small, magnified to tens of millions of times larger, and ensures that users do not observe any obscure pixel points.

And this can only be ensured if the lens becomes so free that the naked eye cannot observe its existence.

“We need more pure diamonds to save more time after vaporization.” The master shrugged his thin shoulders and handed over the raw diamond information from the current factory inventory to Ye Qing. "The quantity of ultra-high purity raw diamonds currently supplied by Nicaragua is far from sufficient. ”

“Boss, we have to find more sources. ”

“Are you asking me to start a jeweler's side business?” Looking at the original diamond minerals in the factory, Ye Qingtong had some dizziness.

There are a lot of rough drills in stock, but these rough drills, WS1 rough drills belonging to the third standard grade, have less than 300 grams of area.

All gemstone minerals, as long as they are supplemented with commercial attributes, are often the most fundamental determinant of their commercial value.

Precious, pure gems in nature are scarce in their own right.

Like jade and emerald and stones.

Rough diamonds of equal size tend to distinguish their value by purity. The purer the diamond, the more generous and rare it will be.

The International Diamond Body classifies diamond rating criteria into eleven purity ratings.

Diamonds below the SI2 level have little commercial circulation value and are used only as diamond abrasives.

SI2 grade diamond, meaning that there are small other mineral impurities inside this diamond that are only suitable for grinding to pieces as jewelry decoration.

Crude diamond grades that squeeze men's backpacks, often in four grades: VS2, VS1, WS2, and WS1.

Diamonds under these grades, other mineral defects inside, can only be detected through high magnifying glass. These raw diamonds are cut and polished into diamond rings that can give a dazzling colourful shine in the light.

It is also these colorful shines that fascinate the hearts and minds of many beautiful girls.

Then up, there is the IF class that is suitable for making famous jewelry.

The standard limit of diamond purity is FL.

The highest rank, also known as Free Diamond. It means that even under an ultra-high magnifying glass, the interior of this diamond is flawless and free of any mineral impurities.

In the past, diamond raw materials imported from Nicaragua by the giant animal industry were boutique diamond raw materials of WS2 grade and above.

These boutique diamond ingredients, even when carefully screened by a tenfold magnifying glass, make it difficult to detect mineral imperfections inside.

Use this diamond ingredient to coat your Dream Monitor for direct use.

Holographic glasses are now coated, not even WS1 grade. Minimum standards, also the second IF ranking on the purity ranking list. Prior to coating, purify and remove all other mineral impurities, even nanoscale.

The cruelty and extremes of industry are often reflected in these seemingly insignificant details.

Coating holographic lenses, even a nano-grade mineral defect, is applied to the surface of the lens.

When the user wears holographic glasses and experiences the virtual world from a 180 degree stereoscopic perspective, the flaw is magnified tens of thousands of times to become a zero point and a few millimeters visual stain.

Perhaps a grain of zero dots and a few millimeters of stain will not affect the user's visual experience.

But who can do it, on a piece of mirror, luckily, with only one flaw?

The odds are even lower than the $100 million median prize.

A slightly easier refinement standard would undoubtedly save a lot of time and reduce the original drill rating to WS1.

But if you do this, a pure, free mirror surface will be filled with fragments of nanoscale mineral impurity particles.

When the user wears these glasses to experience the virtual world, there is a slight chromatic aberration and blurred visual spots that are not obvious but do not go away.

In terms of processing efficiency, only the second-largest IF grade purity drill qualifies as a coated raw material for holographic glasses.

However, the current situation is WS2 and above boutique diamond raw materials, which are already scarce.

Now, even if General Mopu of Nicaragua controls the entire western layout, the three diamond mines in the layout produce less than 30 grams of IF-class rough diamonds per day.

Not to mention Morning Star's FL Limit Purity Raw Diamond.

The higher the purity, the less time the diamond ore is vaporized in a vacuum environment and then further purified, the less material is wasted.

Due to the scarcity of IF-class raw diamonds, the factory can now only allow the master craftsman to carefully mark the location of defects inside the WSI-class diamond raw mine under a high-magnification microscope, and finally cut these defects and separate them from the raw ore to obtain a small fragmented FL-class raw diamond.

It's a fine, time-consuming, handmade job. Diamonds are the hardest substance in the world. How easy is it to talk about cutting them precisely?

“Boss, I don't think even opening a jewelry side business can meet our needs. ”

Masters of Sophistication is serious, “We need a lot of IF grade primary mines, preferably FL limit purity primary mines. I asked General Mope's men, who are responsible for supplying us, not to mention that Nicaragua, even a diamond jeweler across Europe, is not capable of producing more than 500 grams of IF-class diamond ore. ”

“I can't help you with that. ”

“Artificial synthetic diamonds are simply unusable. ”

Ye Qing was somewhat embarrassed, “As for searching for an IF grade mine, it is obviously not something that can be solved with money. No, let's start by expanding the purchase volume of WS1 grade diamonds. ”

“We can only waste some working hours first, cutting these raw diamonds out of impurities and turning them into more pure shredded diamonds. ”

“We can get those jewellers to hand over the inventory at the bottom of the ballast.” The masters picked eyebrows and had strong expectations in their eyes, "I was told that the jewellers had hidden many WS1-grade diamonds in their bank vaults, even a few with FL limit purity. ”

“They stockpiled the raw diamonds in order to raise international diamond market prices, and bringing them to the factory would ease the current shortage of raw materials. ”

“Do you think they'll sell?” Ye Qing knew that the master of ingenuity far underestimated the greed of capital merchants.

If they are made aware that the giant animal industry is in desperate need of a large number of ultra-pure diamond mines, they will not rob them by fire and multiply the price of the raw materials by a few floors.

The master smiled and replied with an unusual thought, "Exactly, they rushed to the fire robbery, and we turned around, robbing the diamonds without paying. ”