Movie black technology

"How is it going?" Once Chen Shen arrived at the place, he went straight to the prosthetic center and met Ma Zhen.

Ma Zhen's face was as usual, with excitement in his dark eyes, walking ahead to lead Chen Shen to the inside of the test room.

At this time this place is very lively, crowded with researchers, in addition to the people responsible for monitoring the instrument, most people are to see the fun.

Chen Shen followed Ma Zhen to separate the crowd, only to see the middle of the test site, a skeleton made of prosthetic limbs is standing on the ground, like a metal skeleton without a head.

It only has four limbs, the position of the body is empty, the back is installed a thin battery pack, the whole body is made of carbon fiber and titanium alloy, painting is mostly black and then partly white to do embellishment, the visual impact is quite strong, the sense of technology is also reflected.

Only ......

The appearance of this prosthetic skeleton plus the painting is really horrible, giving the feeling more like a science fiction horror film inside the killing machine.

Chen Shen all feel a little headache: "You can not change a paint job?"

Ma Zhen did not understand, looked at the prosthetic skeleton, said: "Ha? I think this black and white with the color is quite good ah."

"This exoskeleton can be thrown straight into a horror movie as a noir killer ......" Chen Shen still couldn't stop spitting.

He looked around for a moment and immediately saw the main character of the day in addition to the prosthetic skeleton - He Anshou.

He was now sitting in his wheelchair happily looking at the prosthetic exoskeleton, surrounded by people.

At that moment, he also saw Chen Shen and waved happily over to this side.

Well, it was the Nezha generation that was used.

Chen Shen had just walked over when he was grabbed tightly by his hands with Nezha Generation with such strength that he almost thought the prosthetic limb was out of order.

"Thank you so much, I've been here for a long time to cooperate with the experiment, I thought it would take a long time to finish, but I didn't expect it to be almost finished when I was called here, worthy of being Old Chen's son!" Uncle He laughed loudly, while grabbing his hand and shaking it up and down excitedly, the strength of the machinery allowed Chen Shen's hands to follow only a wave of amplitude.

Maybe the next step should be to add a limiter to Nezha II's grip, it's not like he's going to lift weights, why is he gripping so tight ......

Until this thought appeared in Chen Shen's mind, He Anshou, who used electricity not knowing what physical strength is, finally let go of his hands.

"These are the right thing to do, after all, you are giving the research funds." Chen Shen smiled and patted his shoulder, while standing behind him.

Nezha generation, although very flexible, but not flexible enough to allow a person to bend his hands to grab something behind him.

He Anshou laughed straight up and said, "That six hundred million was fortunately given to you guys, if it was given to anyone else I guess I wouldn't have been able to produce this result!"

He is not wrong, the six hundred million, even if it is given to the most advanced foreign research institutions, but also can not create this pair of prosthetic skeleton.

The most critical part of this skeleton is the brain control device, the nerve control part.

And not long ago the opposite of the Newseum for the nerve signal analysis thing invited him to work with the Chinese Academy of Sciences.

So do not say six hundred million, even if He Anshou then smashed in six billion, the opposite side now can not solve the operability problem.

He Anshou just finished speaking, his eyes were fixed on the prosthetic skeleton not far away, and the eyes of the onlookers were likewise put on the prosthetic skeleton.

Because it is now starting to test.

After the tester put on the controller, the prosthetic skeleton standing on the ground immediately began to walk with the tester's mind.

Creak creak creak ~

The exoskeleton's walking posture in the unmanned state was very smooth.

Whether on a flat surface or stairs or a soft pad, there was no loss of center of gravity to fall, which shows the excellent structural design.

After testing the limitations of the terrain, the tester also conducted a speed test.

In the unoccupied state, the running speed of the prosthetic skeleton could be stabilized at seven meters per second, and it only took about 14 seconds to run the full 100 meters.

This speed is extremely terrifying when placed inside a humanoid robot, not to mention comparing it to other prosthetic limbs used in everyday life.

"Now this speed is in the best speed to ensure comfort, if you do not consider comfort, the speed can reach at least ten meters per second!" Ma Zhen said to Chen Shen from the side.

"Then after carrying people its speed at what?"

Ma Zhen replied, "We have not yet conducted a manned running test, if it is Uncle He's words estimated at four meters per second."

He Anshou also heard Ma Zhen's words, patted his wheelchair and said happily: "This speed is much faster than the wheelchair!"

Chen Shen nodded repeatedly, the structural design of this pair of skeleton is similar to the previous Quaife generation, he only participated in the part of the damper, the rest is Ma Zhen led the team to design.

This prosthetic skeleton can be said to have no defects.

To say that there is, it can only be this skeleton frame in the open space above the automatic walking look a little too scary.

If it is seen at night in a person's case, it is estimated that a person's san value can directly fall to zero ......

Chen Shen said to Ma Zhen next to him, "Look at this result now, your design ability is no longer limited to the field of prosthetics, maybe you can try a mechanical exoskeleton."

Ma Zhen was sweating all over the side, he didn't know how he had gotten to this point when he was obviously just a prosthetics guy.

"I don't think we have an exoskeleton design project, right? And isn't the key to exoskeletons the energy problem? This we can't solve." Ma Zhen shook his head, thinking that Chen Shen's suggestion was unreliable.

"You can apply for a research project, as for the energy problem there will be a way to solve it later, you just need to get the structural design right."

It was too late to think about Chen Shen's hint, the tester over there had already finished the unmanned test of the prosthetic skeleton and called for He Anshou to put on the prosthetic skeleton for the manned test.

Ma Zhen hurriedly pushed He Anshou, reached the prosthetic skeleton and helped him to put it on.

After putting it on, He Anshou wore a manipulator on his head that had been transformed from Nezha's generation of sensing caps and slowly controlled the prosthetic skeleton to hold himself up.

"It worked it worked!"

After feeling a strong support for his crippled limbs, He Anshou immediately became excited.

Then the staff on both sides supported him, and He Anshou was like a child who had just started to learn to walk, controlling the prosthetic skeleton to walk with hobbling steps, and the speed was getting faster and faster, while walking and asking the people next to him to help take pictures of the situation.

"Uncle, you must be careful!" Both sides of the support staff are worried.

Happy He Anshou full of care, instead of the two people a hand to shake off: "This machine is well controlled, you worry about what!"

He had worn a prosthetic skeleton before, but at that time only sat on a chair for flexion and extension training.

He Anshou was like an urchin, walking around inside the test site, and even running at the back.

The crowd followed He Anshou with some trepidation until they were sure he was really familiar with the operation of the neural control, then they put their minds at ease.

Ma Zhen returned to Chen Shen, had the important design materials brought over, and raised his chin to indicate He Anshou who was running around the test site: "Great God, see what else needs to be changed?"

Chen Shen retracted his gaze on He Anshou and started flipping through the information in his hands, handing it back to Ma Zhen in a short while.

"Let's start with this, the current design can already meet Uncle He's requirements."

Ma really structural design of course there is still room for improvement, there is also the energy system of the skeleton can also be improved, the Great White that project inside and some battery technology can be used.

But as he said, this degree is now enough.

Structural design and then optimized to run in the direction of humanoid mecha.

A little shorter battery life to change a few more batteries to charge it, anyway, people who can afford to use this is not bad for the money of a few chargers.

Today's test has been a success, but Uncle He still refuses to stop, running around in the test site.

The surrounding staff are not surprised by this kind of scenario and gradually dispersed to go back to their jobs.

In addition to this project, the most important project of the prosthetic center is the second generation of the two types of prostheses Nezha and Kwazha, which are under intense research and testing.

As for Chen Shen, he remembered another thing.

When Comrade Chen talked to him recently, he said that the results of their holographic project with the University of Science and Technology had come to fruition and sent samples to the research center, asking him to come and take a look when he had time.

That project was a cooperation he reached with the old principal who had no money to repair the road when he went back to school at the beginning of the year, with Prism contributing money, him contributing ideas, and UWSTC contributing talent, to work together on a new machine and material used for holographic projection.

Finding the management staff to ask, the other party quickly dragged out what he said from inside the warehouse, and gave him an explanatory document by the way.

What was displayed in front of him was a flat box shaped machine, with a long slit still visible at the top, looking similar to the heater sold online.

The original holographic projector is a controlled arrangement of dust or specific particles through acoustic tweezer technology, and irradiated with a specific light source, so that they show a specific picture and respond to a specific operation.

Only the holographic projectors he made before could only control one thousand holographic particles each, and a maximum of five in series, that is, manipulating five thousand particles to form a picture.

The hologram formed at this level is just enough for the display panel inside the mech, but any special requirements for color vibrancy, clarity and image size are difficult to meet.

"According to the document above, this model A1 machine is a version optimized with sound tweezer control technology, synthesizing the original ten projectors into one, and the number of holographic particles controlled directly exceeds fifteen thousand units, and it can also be connected in series on top of that, along with a pack of new materials... ..."

Chen Shen put his gaze behind the projector, where there was a bag of fertilizer ......

Yuck!

No, it should be a new holographic material in a fertilizer bag.

I don't know which talent it is, using this kind of bag to contain new materials, if not for the fact that greening has not officially started in the technology park, maybe this bag was taken to fertilize when it came in.

Unwrapping the fertilizer bag, inside is a pile of polymer particles.

According to the explanation inside the document, this is a new material called "holographic dust", like a bag of slightly coarser than flour powder.

This material has quite good performance in light reflection, can be composed of richer and more colorful hologram.

And this material is non-toxic, even if accidentally ingested can be discharged by the body normally, in addition to this material has been specially treated, the taste is unusually bitter after the entrance.

Just like the yellow lien, enough to remind everyone not to swallow at the first time of entrance.

And this material is not light in weight, if there is an accidental failure of recycling, the loss of sound tweezers control they can not float in the air, will naturally fall to the ground waiting for degradation or cleaning, and can not be inhaled by the nostrils.

If used with the A1 projector, it can also increase the number of manipulable particles.

This is simply a material that matches perfectly with the holographic projection.

Chen Shen was a little surprised that the UWI team could find such a suitable material in such a fast time.

Looks like his cheap alma mater has something!

Chen Shen sighed and poured the holographic dust into the inlet at the bottom of the projector according to the instructions above.

Next, press the switch.

After the indicator light came on, a large amount of holographic dust poured out from the gap at the top of the projector, forming the boot image.

Or maybe it would be more appropriate to describe it as a boot image.

This is an image of the Red Storm model, a full two meters high, the details of the top, bottom, left and right are lifelike, if not also through the image can vaguely see the wall behind, almost no difference with a real mech model.

And the projector response speed is extremely fast, from power on to image formation is less than half a second.

Chen Shen connected the projector to the computer and installed the control software according to the instructions in the operation manual.

In the software there are other test images to choose from, most of them are images of a certain kind of object, the Red Storm and boxer number out of all the models can be found in it, there are even some sports cars and images of real people.

The most exaggerated is that there is a lightning five consecutive whip motion picture ......

Chen Shen really do not want to click on ......

Switching a few other images, perhaps after special optimization reasons, the final image effect is very good.

This A1 projector has completely reached the requirements of indoor display, as long as a circle of glass or transparent material around the blocking.

The A1 holographic projector also has a hand control mode and a multi-machine tandem mode.

The hand control mode is the same as the mech inside, directly click the holographic interface to carry out the required operation, but this mode is still lack of application scenarios, so there is no strong development.

As for the multi-camera tandem, it is mainly for outdoor scenes and considerations.

In this mode, in addition to the increase in the number of particles that can be manipulated, the image can be displayed larger and more colorful, the hologram can also be windproof to level 5, as long as the wind is not level 6, the image will not be significantly distorted.