Movie black technology

The number of nano propellars is 100,000, and it is impossible to know in a short period of time.

However, each propeller has a fixed weight, but because of the total amount of propeller can be calculated from the number of raw materials, they only need to be heavy, and the total weight of the expected output can be known. Probably Good rate.

Of course, we want to weigh the nanomaterials, electronic claims that it is impossible to buy on the street, must be special.

The simple way is often simply and efficient, putting the waste on the scales, the result of the weighing is so fast, and then the second grade of primary school will increase and subtraction, and the product rate has also come out.

"There is approximately 40% of the good quality."

The face of the results of the report is not very good.

The upper limit capacity of the original total installed machine is a batch of 500,000 propulsors, and now only 200,000.

This good rate can be said to be the extreme.

Chen Zhen sighed, he had expected it before, and things will not be smooth.

"The teacher, should we continue to produce now? Do you want to wait for the machine to improve again?" The researcher next to it is difficult to see.

Chen Shen wants to say: "The production line does not stop, continue to produce, now the propeller inside the machine first, then remove the qualified propeller from other production lines, put the three machines production Both the machine assemble the large propeller in a machine. "

"Understand!" The researcher nodded and immediately executed the command.

A propulsion unit that is needed by a black antelope is that the large propeller is four sets, and each theory requires 500,000 nano propellants.

However, considering that the self-contained no artificial interference, the accuracy will definitely decline, it is impossible to put in 500,000 pushers, all can just just a radish, all in the right position.

So you still need to prepare more nano propellars. When you put it in assembly, it is possible to spend all 500,000 pits.

Fortunately, the nano propeller is not only produced, but also in batches, the Dashan plant he has been fully completed or the total assembly line is being built.

Therefore, the propeller produced by a total installation line is not enough, and it can also be tuned from other production lines, and the number of pushers will be assembled.

However, each of the production lines is different. Although it started the first quotation in the first time, the production cycle is different from each other, so waiting for a few days, the factory will make a nano propeller, all put it all The last assembly is performed in a headset.

After waiting for three days, the first major propeller finally assembled.

The common rocket engine appearance looks like a buckled steeled cap, the diameter of the bottom of the spout is higher than the person, and there is a tube that looks a mess around a circle, and there is a rough The industry is beautiful, even a bit hand-made, but the propeller of Tibetan antelope is different.

From the plasma propeller from the outside, there is no tossible taste, the outer shell is very work, no line circle, the shape looks like a medieval wood wine barrel, and there are several neat bumps in the waist.

Moreover, its diameter looks similar to the tires of a car, and the overall height is only one meter, compared with the rocket violence, like a small gentleman.

"I finally finished!"

"I don't know if there is a nano propeller inside."

Two researchers carefully protect the propellers just taken from the production line and push it into the detection room.

This test cannot be used in a simple method.

The researchers first tested the nano lines inside the propeller and determined that they can run normally.

Subsequently, scanning inside the propeller, which is roughly determined that there is no large-range deviation in the mounting range of the inside of the nano-propeller, which means that from substantially, this propeller is normal.

After this step, it is not necessary to make more detailed inspections.

With the current technical means, this large-scale application of nanomaterials, wants to check, only time consolidation, 500,000 nano propellars, if you check when you check it?

Have that time, let the propeller take a trip to take a roof?

Practice is the only standard.

At that time, the engine can't be ignited, how long can it run, and I will naturally know.

As for the matter of the test desk, Chen God is waiting for the factory during the factory.

According to the results of communication, domestic rocket test bench they can use, and they can also perform appropriate transformation.

In short, things are very smooth, whether communication or transformation.

After all, the lift of this plasma propeller is only 17 tons in the district. It is not only 20 tons. For the test of hundreds of tons of thrust engine, the small guy like a plasma propeller, even if it is feud, it There may be no feelings.

The precision helicopter flying over the dome base is hang in the container and soon transs the testist place and prepared.

The Rocket Engine Trip is different, but it is generally a shelf of a cement or other material, in the middle of the shelf, the engine is placed, the engine can choose to lie down or stand your own urine.

Then there will be a drain groove in the direction of the engine jet.

Because the high-temperature high-speed air flow injected during the test of the rocket has a powerful impact and corrosive force, it is necessary to prevent the gas to guide the gas away from the test desk, prevent the flame bath and the debris reflection from impact the test bench, destroy the engine and equipment.

Popular and briefly, the flow tank is a small small pool.

And around the test desk, there will be a fuel tank needed by the engine.

However, for plasma propellants, the fuel tanks and flow grooves are not used, and they only need to prepare electric power and propellants.

After preparing it a day before, the propeller was sent to the test desk on the next morning.

Chen Shen's choice is a vertical test, which is to let the engine look at the kind of urine.

This test desk can best simulate the engine state at the time of rocket emission, and this test desk also transforms the engine bit as required, which can adjust the angle of the engine from the vertical floor to the ground. There is no problem.

This can match the situation on the antelope.

On the Tibetan antelope, the angle of the propeller is referred to in the body, and it can also be freely switched in a ninety degrees parallel to vertical.

After the propeller is installed, the staff immediately evacuated.

Chen Shen looked at the test room in the monitor room, and the start button was pressed silently in the scheduled time.