My pet is snapping turtle

Han Guang is sitting in his office, sigh!

Don't look at him shows the scenery, in fact, as the person in charge of the Taishan Alloy Tool Group Huahai Branch, his pressure is large.

In everyone's eyes, habitually believes that domestic tools and imported tools are always worse.

In these years, imported tools are aggressive, massively seize the inflammatory national alloy tool market, helpless, domestic tools can only play 10,000 in the middle and low-end fields, and they cannot enter the high-end field.

As a well-known enterprise in the alloy tool industry, Taishan Alloy Tools Group finally maintains a poor share in the domestic high-end tool market.

"Oh, it's hard!"

Han Guang sighed, he just saw a mechanical processing video, using an imported car knife, the CNC machine tool processed a beautiful workpiece.

There are a lot of comments below the video.

"This is an imported alloy car knife is undoubted!"

"It's amazing, amazing, when our domestic alloy car knife can reach this level."

"In fact, we also have better alloy tools in our country, the price is still very cheap, cost-effective is very high."

"How to roll, how to make domestic and imported."

"..."

After reading this video, after reading the message below, there is only a full bitterness in Han Guang's heart.

In addition to bitter and helpless smile, what can he do?

What makes him more stress is that the eleventh international alloy tool exhibition will be held in Huahai City, many international toolers will participate, so there is not much inception in Han Guangxiang.

material!

Everything is a material problem!

Han Guangxin is so unhappy. He believes that its group's tool design is not bad better than foreign countries, and manufacturing processes are not inferior.

In the final analysis, or the problem of material, alloy materials produced by manufacturing tools cannot be compared to abroad.

Han Guang, which has a lot of pressure, touches a smoke and slowly smoked, and the brow wrinkled more powerful.

.......

Global Special Materials Co., Ltd.

The workshop scene, a busy, many people even shook their heads, they tried a lot of ways, I hope to get a little from this black metal bar, but all failure.

It's only half a day, and it is just a typique of the root stick, and it is far away from the cutting part.

How to do it?

I can't do it at all!

Some people recommend that, "If you don't, we try it with laser cut."

One of the technicians shook their heads, "The laser cut is not good, this is a bar of 500 in diameter, and the laser is not possible to cut it."

"That line cuts, our line cuts."

"....."

They were busy for two days, and they were exhausted for the force of nine cows and two tigers. They finally got a piece.

After getting such a piece, use this metal to sample, they launched a series of research and testing.

If the density test is performed, it is learned that the density of this metal is actually up to 12.5, while the density of ordinary alloy steel is only about 8.

In addition to the density amazing, its hardness is more horrible. We know that diamond is the hardest thing in nature, hardness reaches Moh's hardness 10, and this black metal hardness is much higher than diamond.

Such a high hardness, it is very crisp, which may be hard, but it is not.

It has a very high strength, which is much higher than that of ordinary alloy.

The hardness is very high, the strength is also very high, this is not, it is a thing of the alien manufacturing.

In addition, it also has a range of features such as corrosion resistance, and the oxidation resistance is very high.

It is no wonder that it is soaked in the sea, which is still bright as new, and there is no oxidation in the dark.

The melting point is also relatively high, although there is no gray black metal to more than 3000 degrees, its melting point has reached more than 2400 degrees, much larger than ordinary steel.

......

Global building.

In addition to the progress of the graphene-aluminum battery, Liu Yong has been remembering this black metal rod. How is the progress of Xinfei?

If Xin Fun Wen is so far, Liu Yong may pick up the phone to play inquiry.

Xinfei Wen finally entered Liu Yong's office, and he saw that he had a little nervous.

I don't know if it's a rare office, or because I spend too long, I am worried about being approved.

"boss!"

When Xinfei is in the heart, Liu Yong seems to have no less than half a point, the face is as usual: "The result came out, give me a look."

Xin Feiwen quickly handed the report to Liu Yong.

Liu Yong took this report seriously. After reading it, it took a few minutes for more than ten minutes.

The original calm face finally had a change, and it was possible to find that Liu Yong's face was excited with a silk.

Joint this report, Liu Yong Road, "I didn't think of it hardness and intensity!"

Oxidation, high corrosion resistance is extremely high, this is expected in Liu Yong, because this metal can explain this in the bottom of 50,000 years.

If the corrosion resistance is slightly almost, it is estimated that the slag is estimated.

The density reached 12.5 and also in Liu Yong's expectations. When the overlord, the weight of this metal rod did be at least twenty tons.

See Liu Yong finally finished reading this report, Xin Feiwen, "boss, which except hardness and high strength, extremely good corrosion resistance, is very good, that is, the thermal performance."

"I have never seen such a good metal. After annealing, it can be reduced to ordinary steel, which is very convenient, and after quenching treatment, it can be used after quenching. To reach the hardness of Mo's hardness, it is much harder than the diamond. At such a high hardness, the strength is not weak, and it still has very high strength ... "

Xinfei is endless, it is full of praise for this metal, and it is completely worthy of praise.

Liu Yong asked, "This metal has such characteristics, what do you think it is best to use?"

"Of course, it is the tool area." Xinfei wondered, almost blurting, "it is definitely the most, most ideal alloy material in the tool industry."

"I am sure, the alloy tool manufactured in it is the best tool in the world, absolutely crushed the so-called imported tools on the market."

His face is excited!

There were three "most" and "percent" and words "absolute".

When I listened to Xinfei, Liu Yong quickly remembered a person.

Han Fei!

...........

The third is more sent!