Rewriting the Technological Scenario

In the morning, it is an official attitude expression. In the afternoon, it is more subdivided sessions, while noon rest time is a big wind semiconductor buyer, photoresist, mask version, electronic special gas, wet chemistry Semi-body core materials such as products, targets, polishing pads and polishing fluids run to find Meng Qian.

Of course, there are also silicon companies such as Central Shares, Zhongchen Silicide, Guosheng Electronics, Single Crystal Group, and these enterprises are a competitor of wind semiconductors. Come, they and the wind semiconductor seem to be competitors.

"Meng Bi should be clear, our mainland semiconductor wafer enterprise technology is relatively backward, which has long been based on polished slices and epitaxial pieces of 200mm and below, but the way, on the one hand, because our foundation is very weak, many companies are From scratch, on the other hand, it is also in the context of chemical, winning high, guano crystal, and Germany monopoly of more than 90% market share, we have little market, we are also difficult to have a chance to come into contact with VIP.

However, we now know that the wind semiconductor has prepared to start to 14nm process after the 3D transistor is taken. As the process line is constantly narrowed, the chip manufacturing process is constantly decreasing to reduce the defects of the silicon-defect density and defective dimensions. Silicon The film will usher in again and again.

And high-end products have always been step-by-step step, before, we have not changed, but this step we think is that we have the opportunity to walk in front, so though we know the silicon of wind semiconductors The film is a core product, we still want to talk to Meng Mong to talk about cooperation. "

"You should all know the quality of the wind group, all with technical speech."

"Our 8-inch factories have begun to start."

The silicon wafers in the mainland have always been in the level of 8 inches, and the Silicon Industry Group in Shanghai has changed until 2015, and now everyone can build an 8-inch production line in 2011, which means that it is the same as that Strength is still different.

The reason is not the same, naturally, there is a batch of semiconductor middle and downstream enterprises that have been pulled up in Shanghai, and there is less support, but they want to do the highest end, the mainland can still see only the wind semiconductor.

Meng Qian also didn't want to go, directly gave the "invitation letter", but will eventually see their own skills through the company's certification, Meng Qian can give the opportunity.

In other materials, the photoresist is the most deepest in the origin of the wind group. It is also a large number of domestic materials that have begun to change the quality of the quality. Because the wind group has urged the development of domestic photoresist from the beginning. In today, Jingrui Shares, South University Optoelectronics, and Yan Jingkai's photoresist can successfully get the certification of wind semiconductors and become a supplier of wind semiconductors and grow rapidly by wind semiconductors.

Up to now, domestic four major photoresist companies have taken 5% of the global photoresist market with strong wind groups and other domestic companies, although it seems to be only 5%, but the Once China is lithography The global proportion of globes in 2011 is about 0.5%, of which Jingui shares have become the world's 10th large-scale glue enterprises with a 2.1% market share.

The LCD panel develops the fastest field of the main wind group to develop internal industrial chains, especially the material that Samsung wants to monopolize the LCD panel is more excited, so that the wind group has accelerated with similar clear overflow. Cooperation between domestic mask plates, and domestic wet electronic chemicals are developing rapidly with large wind and electricity.

So Meng Qian first focuses on contact with domestic electronic special gas companies, as the wind semiconductors and large wind and electromechanical fundamentals are imported products.

The cost of electronic special gases in the application of the semiconductor is about 5%, but due to the wide variety of varieties, it has been widely covered in the semiconductor process, and has been hailed as a core product of semiconductor technology.

Today, I will talk to Meng Qian, is the stone pine town of Walt Gas, Walt Gas, and the only gas company certified by Astrol.

"The domestic special gas is actually gradually increased from the development of the domestic electronics industry, and relative to other semiconductor materials, the development of special gases is relatively early, and in 2006, the whole industry got the country. Attach great importance, the goal of the time is to break the technical monopoly.

In the 18 years of our company, we have successfully broken high-pure hexafluoroethane, high pure trifluoromethane, high-pure carbon dioxide, etc. Technical monopoly let us have the self-research and production capacity of these special gases. "

"Take the liberty to ask, as far as I understand, your company seems to have never come to find us, don't know because?"

"Because we didn't solve the problem in mass production before." Shi Ping Township explained.

He said that Meng Qian also understood, successfully developed to break the technology monopoly, but its marketization needs to be stable mass production capacity, "So today's stone is to come to me, I have to solve the mass production. Is there a problem? "

"Yes, several of our factories have been put into use last year, this year we want to try to become a vendor of wind semiconductors and large wind and electrical."

Meng Qian saw the self-confidence in Shishi Township, and also gave the "invitation letter", and later met the country-produced special gas enterprises such as Jacques Technology, South University Optoelectronics, Juhua Shares and Kamadi.

After contacting the special gas enterprises, Meng Qian began to contact CMP polishing pad and CMP polishing liquid enterprises.

Chemical mechanical polishing techniques are a means of obtaining global planarization in integrated circuit manufacturing, and this process is to obtain a surface that is both flat and scratched and impurities.

Unlike the traditional pure mechanical or purified polishing method, the CMP process is to achieve removal of the wafer surface micron and even the nanoscale different materials by surface chemical effect and mechanical grinding techniques, thereby achieving the wafer surface nanoscale flat. The chemical effect makes the next photolithography process.

In this field, Meng Qian first is the president of Dinglong Holdings and Wang Shu Min, Wang Shu Min, Dinglong Holdings is one of the representatives of the future domestic polishing pad, and the Angi Technology breaks overseas polishing liquid technology monopoly. But because Wang Shu Min is a nationality, there are always some articles to do this. Some things are really unnecessary, and there is a large number of rice Chinese in the process of science and technology development.

I don't know if it is because of the reason, the two have chosen to meet Meng Qian. Zhu Shun is even opened to see the mountain road. "Meng Qi, we have made a decade of investment, and finally built the domestic unique international advanced integrated circuit chip CMP polishing mat Research base, and we are constructed in this matter, because we realized that the evolution of the semiconductor integrated circuit will derive more new technologies and new substrate materials, which will make more new needs of the polishing process.

As the wind semiconductor is challenging 14nm chip, according to our research, the key CMP process of the logical chip process of 14 nm or less will reach 20 steps, and the polishing fluid will increase from five or six of 90 nm to more than twenty.

And this is exactly our opportunity to go backwards.

We have heard that the wind group is attacking 14nm crafts, we want to become a supplier of wind groups, seeking new breakthroughs in the process of upgrading. "

Zhu Shunfei made Meng Qian a bit, could not help but look to Wang Shumin, "The idea of ​​Anji Technology is?"

Wang Shimin said very certainly, "We have broken through the technical monopoly, the next step, nature is to break the market monopoly and regenerate the industry market pattern."

If this is what the biggest impression on Meng Qian at noon, it is definitely that the strand is confident. As for this confidence, maybe, really moved to Meng Qian's four or five years.

High-end technology, pulling forward for four or five years, enough to affect the next year or twenty years.

Meng Qiao smiled and gave the "invitation letter" again, and said that the word said to everyone, "I really expect that all core materials in the five years of wind semiconductors and large-scale air-raising all core materials are domestic."

...