Rule system

R & D building, gate.

Looking at the bus from the past, He Guilin stood in the original place. He continued to think about Zhao Wei, and Zhang Hongtao's special reminder.

"The academician Zhao visited two days, did not say a few words, how did you finally come to a suggestion?"

"I want to suggest, just a guest!"

"I really have suggestions, continue to heat when mixing, then directly deoxidation treatment ..."

He Guilin carefully built, and thought of Zhang Hongtao's reminder. "Do you try it without a loss? But try ... you have to apply!"

Zhao Wei said that it sounds simple. It is actually working. It is very troublesome. It is like a jump mixer. It is like it, it is to fly the liquid, but you have to know that the metal of thousands of degrees Liquid, so high temperature is not easy.

After the metal liquid is mixed, the intermediate step is skipped directly to deoxygenation, and it is necessary to adjust and transform the device.

These are not determined by the R & D group.

The similar equipment is adjusted inside and outside, and it must be reported to the above, let the above board decision can be done, and the adjustment process must stop the operation, only the R & D group can't do it, and the armed argument is not to say, he is not Know why, definitely unable to conduct arguments.

He Guilin thought again, "But Zhang Hongtao also makes sense, try not to suffer, but also the suggestion of Zhao's advice ..."

Although He Guilin does not think that Zhao Wei has a study for alloy materials, it is recommended to hear, because Zhao Wei has created a lot of miracles, maybe the other party is from other fields, find inspiration to give him suggestion.

Or that sentence, "Try, don't suffer!"

"Any, it is the suggestion of Zhao's advice!" He Guilin suddenly wanted to understand, things are Zhao Wei to visit, give the production process, as long as you do a report, add yours, you can try 'ideas, do you want' try? Try ', let the above decision will be fine, no accident is definitely available.

Even if Zhang Hongtao, Wang Zhixin and other alloy materials experts, it will definitely consider it seriously, and they will find a lot of people to argue, because 'Try' cost is not low.

Zhao Wei is not the same, his cross-areas recommend, will also get higher levels.

the reason is simple--

His name is Zhao Wei!

......

the other side.

Zhao Wei, Zhang Hongtao and others, sitting on the car in the capital, they want to stay in the car ten hours, will definitely be very tired.

Everyone else closed, Wang Zhixin can't calm down, he always thinks that Zhao Wei said, but I don't want to understand, but I don't want to say, because he is not based on the study of nickel-iron alloy. I still feel that 'single crystal nickel alloy' is more prospects.

The big direction is Zhao Wei, and the main researcher is also Zhao Wei. He is the old qualification of alloy materials, and it is impossible to change the direction.

Wang Zhixin knows if it is a small opinion, there is no problem, but also show his knowledge, but the research is the big direction, whether it is correct or wrong, it will definitely make disagreement with Zhao Wei, and there is no doubt that R & D group is It is the core of Zhao Wei, even if his half a student, Zhang Hongtao is also biased in Zhao Wei.

This is a helpless place.

Wang Zhixin thought a lot of things, but for a lifetime for alloy materials research, professional fields, he still wants to understand, just a bit bite open mouth, "Zhao Academician? Academician Zhao? Sleep?"

"what's happenin?"

Zhao Yu opened his eyes.

Wang Zhixin directly, "It's like this. I don't understand it for a long time. Why do you make that suggestion? Jumping mixer should have no problem, and after mixing, Direct oxygen, I don't understand."

Zhao Wei smashed his head and said, "I just think it, the material performance that is manufactured is better."

Wang Zhixin has no mouth in half, and there is no response for half a day.

This……

Do you say not something wrong?

He simply jumped through the topic and came to the greatest question. "I listened to Hong Tao, you decided to do the study of nickelin alloy, gave up the single crystal nickel direction, I also want to pass, why?"

Wang Zhixin said that he was thinking in his heart, maybe Zhao Wei will reply, "I think the nickel-iron alloy is more prospects?"

This time he guess wrong.

Zhao Wei decided to do the study of nickel-iron alloy, but also thoughtfully, but he became a lot of reasons for Zhang Hongtao. He became serious, explained, "our R & D goals are doing turbine blades. At present, we have turbine The need is to catch up with the international advanced level. "

"Correct."

Wang Zhixin listened to nod.

Zhang Hongtao and Shen Zezhehe also opened his eyes, watching Zhao Wei, I want to hear what he will say.

Zhao Wei continued, "The most advanced fighters in the world, the turphalace of the engine, almost 1,726.85 degrees Celsius of 2000), the thrust can reach more than 12 tons."

"We have to do advanced engines, the demand is similar, and finally the finished product reaches 2000 open standards."

"I think this standard, improve the manufacturing technology of nickel-iron alloy, can achieve, single crystal technology is really advanced, single crystal nickel is very broad, I also believe, but we don't have that high demand."

"Maybe thirty years, forty years, to the sixth generation, seventh generation fighter, space-level fighter, need to use more advanced engine, but now, no need."

Zhao Wei said very seriously.

Wang Zhixin, Zhang Hongtao and Shen Zezhehe suddenly see, all surprised to do not know what expression.

"Demand is just 2000?"

"Is 2000 is not high? General metal, the melting point is only one thousand open! The alloy is more resistant to high temperature, but in theory, the alloy will only be more than one thousand than the original metal, the melting point is one thousand open."

"2000 is open is the upper limit!"

"Nickel iron alloy can meet? Can not use single crystal technology?"

If you change to others, Wang Zhixin wanted to spray him, but it could face Zhao Wei and couldn't say it. He could only continue to put the doubt in his heart, and he also had an idea.

Zhao Wei has given suggestion to He Guilin. If He Guilin is doing it, it really improves the performance of the final finished product, and can prove that Zhao Wei is not just talking.

otherwise……

This project is really no prospect.

Anyway, he is impossible to improve research and development based on the domestic engine turbine blade material K03A, which is not possible.

......

Yanhua University.

Zhao Wei, Shen Zenghe went to return to return, and started to build a metal material laboratory. The laboratory does not need to go to new houses, because the office, the conference room has, only need to increase the operation between the ceiling, the venue, empty Yes.

On the operation between the power engineering laboratory, it is possible, and Zhao Wei has went to see it. It simply decided to immediately build a large-scale workshop, they only prepared to run the laboratory, some foundations It is possible, like a high-temperature furnace, etc., the high-temperature furnace, etc., can make the metal composite laboratory of cooperation.

Yanya University is also supported by the establishment of metal materials laboratories. The school, and the department is more than just directly approved the office, and the operation is also specially allocated to one million costs.

Some people who know are very funny.

Mainly the name.

Metal material laboratory? Double Airlines Alloy Material Laboratory, isn't this name?

There are less than two words ...

Several power engineering, professors, teachers, also have the leaders of the department, come over to disturb the name, but Zhao Wei treats the name is very special.

"Just call this!"

"When I applied for a project, it is this, what is the name?"

"Anctimate is not repeating!"

I have listened to the corner of the mouth, they don't understand the details, but I know the above approval projects, the reason is definitely on Zhao Yi, and there is no relationship with the laboratory.

Even if Zhao Wei does not apply for an application in the name of the laboratory, the project has a lot of probabilities through approval.

Many people also envyed the Shen Zehan.

Shen Zezhehe is just a deputy professor, the title is just higher than ordinary lecturers, but because the material is new, he is the highest title, and there is a total of investment million laboratory, you can say a jumper. The peak of the working environment.

In the envy of others, Shen Zezhe is very stressed, and the study is not necessary to participate in him. However, the laboratory must build, purchase installation equipment, coordinate site problems, handle various qualification documents, etc., a lot Everything wants him to be busy.

The daily thing of the Shen Zehanhe is not enough, he only feels very stressed, and it is very helpless to find Zhao Wei.

Zhao Yi listened to some wonders, he asked, "Why don't you hire? Just a person? So many things, how can you come over? And you will come over, and it delays the progress."

"Is this not thinking about saving money?" Shen Zehi rushed with explanation, "Buy equipment also considers more, like some 100,000 or more equipment, you can save 10,000 pieces than one more."

"Money is not important, progress is important!"

Zhao Wei said very seriously, "The matter of the laboratory is best to get in a week, more money is nothing to do. Others are the same. I need it fast, not saving money."

"Ah? Such anxious?" Shen Zezhanhe was surprised.

He felt that he was considered for the project, and there were some funds in the laboratory, and the project can be worse. It takes a little more than a time.

Zhao Wei shakes his head, and you have to follow the progress, know it? We are working with Zhang Hongtao, but you can't do anything, otherwise it is not cooperation, we must be able to complete some basic experiments. Work, this is the most important thing. "

"but……"

Shen Zezhehe tangled it, "" This project takes a long time, how can I have one or two years - "

"Who is telling you?"

Zhao Wei frowned, "One, two years, I can't wait to start research now, then who is so good? The laboratory is perfect as soon as possible, and Zhang Hongtao is talking about it. I will start now. I have already thought about it. , The time is most important, don't expect any funds, as long as you don't involve large equipment, or other solutions can't be solved, the better, OK? "

The Shen Zeharaoi nodded, "OK!"

Zhao Wei and Shen Zezhehe were sure when they were talking, but he didn't see it.

The 307 steel mill has been greatly gains. He knows that the K03A nickel-iron alloy manufacturing process has been understood, and "the supervisory law" can notice the problem in the manufacturing process, just like He Guilin, a leader of the steel mill, said There are a lot of the awareness, most of which are small problems, saying that it is not short time, there is a big problem, and the He Guilin reminded He Guilin.

These small problems are also greatly gains.

After all issues have been corrected, the K03A nickel iron alloy manufacturing process has become perfect, and performance will definitely get certain improvements, but because of the correction, the performance will not increase the quality.

Zhao Wei's goal is not only to improve the manufacturing process, otherwise it is also available for an additional project to 307 steel mills.

The results of material learning are not important to him.

Since the project has been applied, 20 million R & D requirements have been obtained, and alloy materials that go beyond the international level.

If you let others know that Zhao Wei's goal is to go beyond the international level, it will definitely feel that he is crazy, how can the international top level may exceed it, but Zhao Wei is quite confident, especially visited 307 steel mill. After obtaining a large number of 'reality', understand the entire process of production, he knows that as long as the 307 steel mill improves the manufacturing method, it is enough to enhance the K03A to enhance a certain performance.

This increase is difficult to catch up with the international top level, but with the previous foundation, the gap is not so big.

Then it is improved.

The development of alloy materials is too complicated. Whether it is a manufacturing method or an element ratio, there is a unclear combination, and there is no so-called 'perfect formula', and there will be no 'perfect method'.

Zhao Wei also does not require a perfect way.

As if I said with Wang Zhifang, he does not need to make very high-end alloy materials, just catch the current international level, just take a correct road.

What is the right path?

Add rare elements -

rhenium!

The K03A turbine blade used by the Kunlun engine does not contain rhenium elements, knowing that the addition of bismuth is a good method, but how to add, what kind of ratio has not been studied.

Rhenium is a resistance to high temperature, melting point up to 3180 degrees Celsius.

The purpose of adding rhenium in the alloy is to improve the melting point, but because the pure ruthenium is soft, the addition of too much increase in ruthenium will affect the strength of the alloy, and the methods and amount added are a problem.

Therefore, the main direction of R & D is to improve the K03A based on the 307 steel mills to study the addition of rhodium element ratio and method.

Zhao Wei believes that the K03A after the improvement is very good, and the performance of the addition of rhenium is very good. It must make the final alloy performance exceed the international advanced level, and the process of research and development is various methods, various methods. Match the verification.

Every experimental verification can bring some conditions, and it will help him more understand the added situation.

After several experiments, they can try, high efficiency improve the melting point, and keep alloys or lift strength ratios, methods.

This is the research and development process.

......

Zhao Wei has been in the beginning of the study, and he has written a report on improving manufacturing, directly submitted to the upper level, and issued to 307 steel mills.

307 Steel Plant has received a report, they all have a little doubt, "Zhao Academician visited once, find so many problems in the manufacturing process? Is it necessary to do it?"

He Guilin gave an answer. "When Zhao was leaving, there were many small problems, and he did not expect to report directly. However, we first verified the big problem he said, just two days."

"Correct."

"Take a look at the results."

The 307 steel mill passed He Guilin's recommendations on Zhao Wei, and rapidly tissue the ultra-high temperature furnace and jumper mixer, so that the silicon iron and nickel iron are mixed, it can keep the heating state, after mixing, then directly Dioxy treatment.

After completing the transformation work, they got a set of processes to make new K03A.

The second day afternoon of the steel mill received Zhao Wei, the new K03A was manufactured. He Guilin led the research and development of the new K03A inspected, and immediately got an amazing conclusion -

The newly manufactured K03A is longer than the original, the melting point has increased nearly 100 degrees Celsius!