Rule system

Peng Enngui strives to lead the team to develop, to prove that at least in the field of high-end alloy materials, he is an authoritative top expert.

This is also the best way to find the face.

Peng Weigui has opened a back, and he shouted a few scorpions. He seems to find the feeling of young, there is a kind of struggle, hard work, will fight.

He played a leading role.

The next morning, Peng Weigui went to the data laboratory, took over the work of Li Rongmao, and began to continuously organize the experimental data. In the morning, I also went to the R & D group, and discuss issues with others.

All day, the team is in the sorting data and arguing in the discussion.

The R & D of alloy materials is the most important thing to argue.

The purpose of the argument is to find a method of 'might outgoing results', then go to experiment, whether it is failure or success, it is necessary to organize data in the experiment process to provide support for the next argument.

This process seems to be countless road, you must make a choice, the first choice will be important, follow-up choice will decide how far, the purpose of the argument, the purpose of the argument, choose all the roads to go, smooth Going directly, after reaching the end, see how far the specific walk.

If you can find the optimal solution in the argument, it will obviously be the resultant.

But it is almost impossible.

In the research and development of alloy materials, the argument is indeed very important, but the argument is also very difficult, and it is almost impossible to discover the 'optimal solution on the argument, and must be experimentally experiment.

In the process of continuous experiment, a large scripture is sprinkled out.

Therefore, the alloy materials have a very burning money, and there is enough funding support, and it can go to the experimental new method, and it may spend money out of the result.

This is still a probability problem.

Peng Enguo hopes that 'luck' stands on this side, even if it has worked hard, we must work hard.

at the same time.

The 307 steel mill has been prepared for more than a week, and finally fixes the small problem of Zhao Wei said the manufacturing process. They even stop a high-temperature furnace, and the equipment between the entire operations is to give He Guilin's The team was experiment.

It can be seen that the 307 steel mill attaches great importance to Zhao Wei.

He Guilin led the team to fix the manufacturing process of K03A. After a week, the work was finally ended, and it was also possible to make a manufacturing experiment.

Finally, the experiment started.

The raw materials before the correction have been taken, starting from the correction position to continue manufacturing, one technician, worker come over, one machine runs, and many people will make a record.

He Guilin is in the operation, follow the experiment, and he is looking forward to the final result.

Two days have passed.

The production of K03A is the fastest need for three days. From the middle of the way, it has to be manufactured for nearly two days. The experimental operation is the overtime plus point, and the start of the two-four hours of turn is finally produced.

After the finished product cooling, it began testing its performance. Many people went to the tested, even the leaders of the 307 steel mills, the director of other projects, and the past onlooked.

This is a big event.

K03A is one of the proud results of the 307 steel mill, but it has not improved in the past few years. It seems that it is necessary to be replaced by other alloy materials immediately, and 307 steel mills are very unwilling.

So many people who understand the situation, pay attention to the experiment of He Guilin R & D group.

at last.

The first test data came out.

"The melting point is 1350!"

"More than 1400!"

"exceeded?"

"100% exceeded, I have seen it far away, wait for a while, ask that operator!"

The operator also knows everyone, etc., soon, I will come over from the distance, shouted, "1430 degrees!"

He approached said, "there is a lot of 1420 degrees to 1440 degrees, we can measure the accurate results, but must exceed 1430 degrees!"

"!"

The crowd suddenly boiled.

Among them, He Guilin's tone is the most, he is full of excitement, "" More than 1400? What is it? "

"1420? Even if 1420 is also!"

"This data caught up with the E country? Chasing the international level! Our K03A can catch up with the international level!"

"Haha ..."

Many people can't help but excite.

The high temperature resistance of the turbine blade alloy material is very important. It can directly determine the highest power of the turbine engine, and the international advanced level does not have a exact digital measurement standard, but the news released by various foreign companies can also understand some.

1400 degrees Celsius, it is a boundary line!

Low than 1400 degrees, it is a very common level. A lot of nickel alloys developed by many companies are between 1200 degrees to 1400 degrees, and more than 1400 degrees is 'advanced level', only the top of the world's top manufacturers. Production of a nickel alloy having a melting point of more than 1400 degrees.

307 steel mills can be said to the outside of nickel alloy manufacturing technology, they have reached 'International Advanced'.

......

He Guilin R & D team experiment has created a second batch of K03A, and has been tested for two days before it has been accurate data, and the confidentiality is released.

Confidentiality publishing only the top, related R & D groups, and military-works can see the news.

And the country-defense, army-industrial resilience, all the first-procurement of confidentiality, after the previous approval, to publish messages, and the news released, basically, it is basically deleted.

For example, participate in the R & D personnel.

This majority is confidential. Generally, it will only say the name of the team leaders. The outside world just knows that there is this result, but I don't know who is developing. Who is more research and development contribution, and so on, but internal or energy See the message.

The results of the 307 steel mills, mentioned that it is the report of the report of the "Zhao Wei", which means that Zhao Wei is the main contributor of the results, and He Guilin R & D group is the verification party, 'Participate in the design of the correction experiment process. ', A word' design 'explains the contribution.

Zhao Wei is the first contributor. He made a 'theoretical contribution'; He Guilin R & D team is the second contribution, and the whole process is to design an experiment to verify.

Finally obtained results.

The results of the results of the 307 steel mill caused a sensation. The most important increase in K03A has two points. One is' corrosion resistance to increase by about 20%. The second is' melting point to 1431 degrees Celsius'.

The effect of turbine blade material has a corrosion resistance, but it is directly related to the life of the material. Only high-resistance resistance can have a higher time, but how long can it be used, or substantive? Verify that the theoretical calculation is not reliable.

More people pay attention to 'melting point improved'.

The aviation group is most concerned about the results of the turbine blade. It is very surprised to see the news after the news, it has become very excited, because the material melting point improvement is representative, the autonomous turbine engine performance will increase, and even the international advanced Level.

This is critical to the development of domestic aviation technology.

Liu Jiankun, chairman of the aviation group, immediately called 307 steel mills, congratulations to their latest results, and immediately thought that Zhao Yun was gratified. "I believe Zhao Wei is correct!"

"Zhao Wei participated in research and development, there was a result!"

"This is only long!"

There is also this feeling in the Science and Technology Department. Previous Zhao Wei applied for the R & D project of the turbine blade alloy material. The choice of the direction is the nickel-iron alloy. The project application report is to continue to develop in the direction of K03A. Later, I also consulted the Turbine Group, Metal Research Institute, Aviation Materials Research Institute, and several alloy materials were famous, and they did not optimize the R & D direction of nickelin alloy.

However, the project has been approved, and regret is too late, not to mention, the other party is Zhao Wei, they still have expected.

The results of it?

Now less than a month, 307 steel mills will improve the manufacturing process to improve the performance of K03A under the suggestion of Zhao Wei.

This is the results!

The Science and Technology Department also discussed, "I heard that after Zhao's gap got the funds, they spent the Metal Material Lab, but thought that there was no hope, this money hit the water drift, which is to support the university construction. "

"I didn't expect it, so fast, such a major result, 20 million, value!"

"It's worth it!"

"The funds should be not spent? I pay attention to it before, I declared more than 800,000, most of them applied for new equipment."

"There is still one thousand or two million!"

"Eight millions of results, Zhao is high efficiency!"

"With the K03A after performance, our turbine engine can also catch international level!"

"..."

Many people think that K03A performance is improved, which is the research and development of Zhao Wei.

In fact, Zhao Wei's research has not started.

He is in the metal material laboratory, and the Shen Zezhehe is discussed with rare metals. It is a new study. It is also a very high-end research that must be demonstrated in detail.

Zhao Wei did not know where to start, he must have several 'Staff', first theoretical design for several experiments, in order to get enough conditions, know how to add ruthenium, let K03A performance improve.

Li Rongmao is in operation between commissioning equipment, the new equipment is like a new car, must run several times to adapt to it, after the 'warm-up exercise' is completed, it can play a good effect.

The work of debugging equipment is still very easy, he has time to sit in front of the computer and look at the information in the relevant field.

Li Rongmao enjoys this leisurely working environment, which will make him feel very relaxed, only for more than a week, the foreign spirit is different.

When browsing the latest news, he saw the results of 307 steel mills.

"K03A performance is increased?"

"The suggestion of the University of Zhao? The melting point reached 1430 degrees Celsius? Jun to joke?"

Li Rongmao was surprised to Zhang Da, he has been the research and development of alloy materials, what is more clear about 1430 degrees Celsius than others, and they study single crystal nickel alloy to now, manufacturing the highest melting point, and only 1200 degrees Celsius.

This is quite high.

It is because of the development of single crystal nickel alloy in melting point 1200 degrees Celsius, Peng Engui dares to say reporters, "R & D Delivery K03A single crystal nickel alloy, only time problems."

It is still a matter of time.

The difference is that the previous time is a few months, one year, after the last increase is three years, five years, now ...

"ten years?"

"is it possible?"

"If your luck is good, it is possible for five years, but the lowest needs five years, the luck is not good for ten years, and there is no hope!"

Li Rongmao made a judgment, and suddenly thought of a problem. He was excavated by Zhao Wei to the metal material laboratory. The purpose is to do a nickel-iron alloy research and development project, but it seems that the project is over?

He carefully read the results of the results of the 307 steel mills, or also got the same conclusion, "Zhao's University has completed the argument, so that the performance of K03A has greatly improved."

"The project is over?"

"But ... I don't seem to do anything, I don't even know what the proposal of Zhao is ..."

Li Rongmao felt what should be done, otherwise it will come to join the team, nothing is nothing, and it seems that he seems to be completely useless, he is not the kind of person who is successful.

He stood up in '', quickly ran to the office to find Zhao Wei, "Zhao Academician! Zhao Academician!"

"what's happenin?"

Zhao Wei asked the head asked.

"Do you see 307 news? K03A's performance is greatly improved, melting points up to 1430 degrees Celsius!" Li Rongmao said very excited.

"Look?" Zhao Wei nodded.

Shen Zezhanhe said, "I have said that I have a call congratulations. I am very surprised, but ..."

He stood up and patted Li Rongmao's shoulder, "Don't be excited, it is normal. Zhao University!"

"Oh ~"

Li Rongmao's promisence, then immediately asked, "What can I do?" He felt that he failed, but did not participate in it, I thought about it, "Zhao Academician, the results report should not write yet?" Can I see your suggestion report? "

"Recommendation report? What is it? Isn't it already verified?" Zhao Wei asked someone.

Li Rongmao is full of confusion, "Before you have results, shouldn't you write a paper? Do you want to pay a research and development report to the superior?" He refers to the file similar to the 'project report', and submit it to explain the R & D process. , Elaborate the process of argumentation and so on.

A simple review will be made, and the report will be sealed.

These will be important 'research and development process records, is equal to the' archive 'of the project, it is best to record in detail, and will be available for other people in the future, and the processes can be published.

"This one……"

Zhao Wei did not expect this question at all. He didn't think that it was a result. Even if he was treated as a research and development results, he did not intend to write what 'project report', because of the incoming place, some could not explain, because some places "Supervision Law" found, "supervision law" can find abnormalities, and even directly identify solutions, does not mean that "liability" can be used, even if it can be used to consume a lot of energy.

At that time, he was a question found in the K03A manufacturing process, just recorded a problem, it will definitely not consume more energy, go to understand the 'manufacturing process correction principle'.

"This ... still counts, what is the report, more waste time!" Zhao Wei said unrestered.

"The project report is very important!"

Li Rongmao should be more serious, "project report is a record of research and development process."

"Academician Zhao, you are very great, not in the results of a alloy material, but doing project research and development records, it is to leave experience, like other people who participate in the project, such as Shen Director, and published papers in the future For our ordinary researchers, papers, and achievements are very important. "

Zhao Wei nodded and smiled. I think Li Rongmao is very reasonable. I really is very great, but I have to think about others.

The Shen Zezhehe did not know what to do.

He is accused of Li Rongmao said, but the expression of the 'our ordinary researcher', it sounds uncomfortable.

Li Rongmao didn't wait for two people to react, immediately, "such as Zhao, you will definitely write the report to waste time. I haven't done it here, according to your suggestion report, try to write a project report."

He said, "First I want to learn, I want to see what problems you raise. Second, I also want to write out let you see, prove my argumentation."

Zhao Yuli thought about it, and suddenly, I feel that Li Rongmao is really awarded.

The difficulty of writing project reports is that he can't explain why those suggestions, but Li Rongmao sent the door to help 'to explain'.

This is an excellent employee!

"It makes sense!"

"That's this, hard work, Professor Li! Wait, I will see, I can't talk about it, I don't have a big problem."

"I believe you!"

Zhao Yu horses the board, he still continued, "But the report is only attached. It is different from you, and the research and development in our plan just started, and even have not yet started."

"what?"

This statement is too unexpected.

307 steel mill released a successful news, many people have come over and say congratulations, and the research and development work has not started?

Li Rongmao did not understand, he said weakly, "K03A, the performance is very good?"

"I haven't started yet!"

Zhao Wei said, then he looked at the Shen Zezhehe, meaning that he will explain.

Shen Zeena Road, "It's this. You join the night, unclear, our R & D plan is, after the K03A determines the performance improvement, it is based on its research."

"rhenium?"

Li Rongmao immediately respointed.

"Correct!"

Li Rongmao couldn't help but swallow a sigh. The development of the alloy is very high-end. The domestic alloy material technology has less, and the international gap is still relatively large, and many materials containing rare elements need to import foreign countries. It is because it is too small.

In fact, the fundamental cause is still 'accumulation.

The research and development of many alloy materials in China is in the initial stage. The initial stage of alloy materials are not used in the rare element, improve the elementary ratio, manufacturing process, process, is enough to improve the performance of the material, add rare elements. It is a little too extravagant.

The rare element is letting the material 'hundred feet high, further', but the material is only fifty feet, and there is a large amount of simple upgrades, there is no need to use so high-end.

Peng Engui's team also did the development of rare elements of alloy materials, but only simple 'involved', experiments two times to improve material performance, but the cost does not match.

For example, a material has added a rare element, and the performance has improved, and the cost is doubled.

Another similar material, just improves the process, or is rigorous, and the cost is only 10%, and it has achieved the same performance effect.

How to choose?

Don't do your choice at all!

Even the alloy materials produced in China, performance is only medium, but the cost is much higher than imported from abroad, because the performance is only medium material, the probability of the neck is small, alternative The product is also very much.

In short, the research of rare elements in the alloy is absolutely very high, and it is also very burned.

Li Rongmao looks forward to it.

It is often like this high-end research. Every experiment is definitely repeatedly demonstrated, and it is most likely to make the material to improve the improvement, and then discuss the experiment.

Therefore, Li Rongmao asked immediately, "Zhao's academician, when will we start argument?"

"Argument? What?"

Zhao Wei asked, asked, immediately, "I have already thought about it. You are experts from alloy materials. Everyone has studied the latest K03A, and then design a way to add ruthenium to it."

"If there is not much problem, you will be experiment with your design. I started to do this, I have experienced several times."

"what?"

"Each of us?"

This time, the Shenzhanhe stunned.

"Correct!"

Zhao Wei nodded very certain, "This is how the method. Everyone wants to add a method, then directly enter the experimental stage. I and Zhang Hongtao said there, they have two programs, we have two programs."

"First design four experiments, look at the data situation, follow up to adjust!"

Li Rongmao listened to his mouth, and then he looked at Zhao Wei's eyes as if he was looking to a 'scientific research mighty.

"Every experiment can easily burn hundreds of thousands?"

"Let's do design, don't have a complicated argument, directly enter the experimental process?"

"One person, four times?"

Li Rongmao thought that in the past, Li Rong is under the hand of Peng, suddenly produced a painful impulse.

People and people cannot be more than.

Teams and teams, the gap is also very big!