Rule system

Even if the detection equipment is very precise, it is not easy to detect the instantaneous changes in the empty jump of the gravity and the Zwi -wave weight area.

It is mainly because the position of the detection equipment cannot be within the coverage area of ​​the Zwi area. Otherwise, the acceleration effect of the empty jump to the Zwi area will directly target the detection equipment itself, rather than the normal effect.

This is like the molecules in the air, in the area coverage of the Zwi area, and it is not affected by more gravitational effects, but the molecule itself is affected by the compressed effect.

The area covered by Z waves is a separate area. It can be regarded as isolated from other areas and has unique physical characteristics.

Then the detection device can only be placed on the edge of the zone, which is the junction of the region and the outside world.

The junction of Zwi covers the area, in theory, will still be affected by the active jump of empty, but the degree of influence is not great.

This is one of the reasons for detection.

Another reason is that the impact of the activity of the empty jump on enhance the gravity is very small. The instantaneous enhancement of the gravity is just a reflection of the enthusiastic attachment of the emptiness.

If there is material existence inside, it will be concentrated on the material squeezing instead of the enhancement of gravity, but everything is not perfect. The junction line of the Z wave area and the outside world will still be affected by internal reactions.

This is the key to detection.

Obviously.

Experiments need to be designed very finely, especially the control of the Z wave area, and the placement of the gravitational equipment and high -precision detection equipment, all need to be controlled very fine to get the desired results.

Several factors are superimposed together, knowing that the experiments are not so simple.

When the experiments officially started, everyone stared at the value of the detection equipment. The first experiment disappointed them. The value of the detection equipment changed, but the change was very small. To be precise, only 0.015 was changed.

This is based on 'millimeter'.

Such a tiny change can almost say that there is no meaning, even if it is affected by the environment, such as light wind blowing, it may cause a greater change in the value. The position and other devices can also cause a little change in the number of values.

After turning on a Z wave, you need to wait for a while.

The experimental team immediately adjusted the balance position of the detection device, hoping to achieve a perfect balance with the edge of the area of ​​the Z wave.

Perfect, of course, does not exist.

If you want to have results, you still need a certain amount of luck.

The second and third experiments failed.

After seeing the third failure, many people are very disappointed. They think that it may be poorly designed. Instead, it is better to use 'air pressure' to detect. Maybe the effect will be better.

However, Zhao Yi denied the method of "air pressure" testing.

"Now it is a direct physical test. I believe that the experiment itself is no problem. If it is on the moon, on the space, we can clearly get the result."

He refers to insufficient strength.

To be precise, the intensity of Z waves is not enough, only more than 300 times, and the rate is too small.

In the environment of no air, the compression multiplier of the same Z wave power manufacturing can easily reach tens to millions, or even more than 10 million, hundreds of millions of times.

The Z waved area compression multiplier and without the influence of quality and substances. Whether it is covered by the coverage area or the compression multiplier, it will show an increase in index level.

Zhao Yi's decision was to continue the experiment. He personally guided the position of the high -precision detection equipment and found the balance point.

After more than an hour of hard work, he finally found a position close to the ideal.

Then the experiment continued.

This is the fourth experiment of the day. Whether it is a Z -wave device or a gravitational device, it has been started four times. The energy consumption is very amazing, and the loss or even the energy supply is insufficient.

When the experiment officially started, everyone looked at the value change again.

Finally, the value jumped.

Suddenly, someone exclaimed, "0.8!"

"It's really 0.8!"

"0.8, a large number, right? Pay attention to prove that Zwi coverage can enhance the instantaneous gravity."

"Success!"

Many people exclaimed excitedly.

Zhao Yi was not surprised to see the results, because he knew that the theory must have no problem. In addition, he personally adjusted the equipment by himself. He was still confident in the experimental results.

The current change value has reached 0.8, which is enough to prove that the active space jump active will cause instantaneous changes to the gravity. With the conclusion, it can be based on the principle, but the exact relationship between the Zh wave compression magnification and the instantaneous changes of gravity can be studied.

According to the relationship between them, the ultra -high -power Z wave detection can be achieved.

This experiment was successful.

In fact, they also need to be more surprised. Although they are conducting research, their research purpose is technology, not to prove anything.

They do not need to publish papers or find more clear evidence.

Therefore, research can directly enter the technical stage. The method is to go to space and moon bases to do research, rather than research on the surface of the earth, because the surface of the earth is full of air environment, not to do this research.

After the experiment was over, Zhao Yi held a summary meeting, and then asked everyone to write a report.

The price lifting report and application for research on outer space or moon bases are subsequent work. The superior will conduct targeted funding and cooperate with the support of some institutions to open a series of research and development.

When there is no problem with the theory, the technical breakthrough is only a matter of time.

Intersection

The experimental base continued to overcome two technologies: gravity occurrence and Z wave detection. It can be said that people are surprising.

These two are important technologies for space exploration.

Until now, space exploration related technologies can be said to have been perfect, and it is difficult to make greater breakthroughs in further.

In fact, Zhao Yi hopes to continue to make breakthroughs in the field of material transmission, but if you want to continue to study material transmission, it seems that there is something on the earth.

One is that the environmental influence is very large, and the other is energy consumption and the scale of experiments is very large.

Just doing simple material traditions, it is already a few hundred or hundreds of billions of international cooperation projects.

If it is expanded to continue research, the scale of the experiment must be expanded to have new conclusions, and greater investment is required, and the surface of the earth is not adapted. Long -term risk material transmission experiments are done.

Therefore, Zhao Yi is thinking about doing research and development in the future. The road must go step by step, wait for space exploration to enter a new stage, or the expansion of the moon base, establish a new alien planet base, etc., and then continue to study material transmission experiments. Late.

He believes that the principle of material transmission is very involved, and maybe it is related to the ultimate principle of the universe. If you want to have a big breakthrough in related technologies, it may be a little possibility of other technologies.

It seems that it seems a bit out of money to invest in material transmission.

Because they have more important things-to improve the related technologies of space exploration, and the application of gravitational technology and Z wave detection technology, making the spacecraft a super ship that can truly sail between galaxies.

This is the most important.

With the large-handed investment in the development, the gravitational device was quickly applied to the spacecraft, including three new spacecraft, Mars-1 spacecraft of the Aerospace, one of the three ships, three transport ships, and even even It is two sightseeing boats, which are equipped with gravitational devices.

Next is the most important spacecraft.

The spacecraft installation of gravitational device is relatively complicated, because the hull is very large, the equipment and technology are very cutting -edge, and the transformation inside the spacecraft costs nearly eight months.

In eight months, the Z wave detection technology has also been perfected, which can directly detect the compression multiplier that allows the spacecraft to cross the number of kilometers above the mega.

When the new Z -wave detection device is installed on the spacecraft, the spacecraft becomes a real cosmic ship, which can be freely shuttled between galaxies.

At the meeting of the spacecraft to explore the galaxy, Zhao Yi took over the technical command. He accurately announced, "Our plan is to jump eight times, and in a week, we arrive at the nearest people."

"This destination is RC-03, RC-03 and RD-01 planets."

"We will reach the horses across the galaxy and explore three planets to collect enough information. If necessary, we will also perform landing operations."

"This will become the beginning of humans conquer the galaxy and conquer the universe-"

"I firmly believe that we can complete the task successfully!"

Three days later.

Under the gaze of everyone all over the world, the spacecraft is equipped with 3,000 pioneers who explore the universe, slowly lift off and quickly fly to the unknown world.

Everyone firmly believes,

At this moment, it will become a sign of entering the new era!