Skynet Architect

"After the system scans, the target ebony perfectly fits the engraving order. The target person Song Hai 1972 shipwreck escaped and returned to the ship and photos of the person. The host can use a carpenter-type terminator to shape this sculpture."

How exciting is a short sentence.

"Unloading!" With an order, all the wood was piled up at the door of Si Fan's workshop, and they were never allowed to visit inside the workshop.The ugly-looking wood on the ground was all in the most primitive state, and even covered with dust, but Si Fan didn't care, he moved all the small pieces into the factory by himself.As for the largest pieces of small-leaf boxwood wood, they are there. I will let the Terminator come and carry them in a while. As for the huge ebony wood, it was pushed down directly on the cart by a dozen boys with a steel plate frame. , The huge wood weighing several tons is more similar to stone and very strong.

Seeing this precious wood, Si Fan had an idea of ​​owning it, but as the wood put down this idea, he disappeared in smoke.I'm doing construction, and now I'm carving out to help with the task. By the way, I can make a small amount of money. When I get rich, I can buy antique wood at the auction house!

"You can put things on the ground. Then my people will take them away. Stay away. Outsiders are forbidden to watch everything in the factory!" Si Fan shouted loudly and drove the bodyguards away.

He just stared at the front with scorching eyes, Young Master Song has now walked around the door of the factory with someone, Young Master returned to the car and didn't know who to talk to, while the bodyguard was slowly near the factory. Patrol, probably because I was afraid I would run away.

The only thing that is an eyesore is Miss Panhua Zheng Miaomiao.

"Sister! Are you going to buy something to eat? Or do something else?" Si Fan forced a smile and looked at her.

Zheng Miaomiao was taken aback and asked in surprise: "I have to leave too? Am I the outsider you said?"

Suddenly Si Fan was completely speechless: "Aren't you still my insider? These things are temporarily inaccessible, so you should go to work. It won't take much time."

In order to remain mysterious, Si Fan hurriedly coaxed Zheng Miaomiao away, and then hurried into the factory building.At this time, the plain workshop was empty and there was nothing, not even a fixed device. Two almighty Terminators stood on the left and right sides of the door as if they were door gods.The carpenter-type terminator is already on standby.

"Bring in all the wood materials, the carpenter-type terminator begins to prepare, and inform me after scanning the most suitable image for carving!" Si Fan ordered.

The red light in the eyes of the carpenter-type terminator has already begun to act. The two almighty terminator choose the wood, but their goal is a small-leaf boxwood wood that is about one person high. It seems that they are ready to directly carve into Song Shaoye. The image of dad.

At this time, Si Fan had a photo of the target in front of him. It should have been a few years ago when Young Master Song’s father was in his thirties. He stood on the dock with his head held up and his right finger pointing to the mighty world, and his left hand. The lighted cigarette burned slowly.

That is simply the art of both pretending and arrogant, and it freezes the most powerful moment of this man.

"This image is ok, just follow this. What flaws show up after the carving is finished!" Si Fan said.

The picture in front of him changed again. Now Si Fan appeared in front of the whole wood, and he almost squirted blood when he saw it first.

I saw that the first cut of the light representing cutting was to cut off a quarter of the wood!The thickest piece of wood was rolled to the ground first, and then the wood was continuously roughed, cutting down a lot of the surrounding wood, leaving only a large frame, and the excess waste seemed to be quite a lot.

After rough processing, the light flashes at a speed comparable to 32 times the speed. The fast-forward stunned Si Fan’s 24K krypton gold dog eyes. In just ten seconds, the simulated statue had appeared in front of Si Fan. The statue in front of me was flawed in several places.

It was as if the cigarette that was originally lit should be new, but now it seems to have been cut and broken. It looks very awkward, and the other is that there is such a small crack on the back of the statue.

This crack is very shallow, but it is definitely a major problem.

Looking at the statue, Si Fan bit his lip: "It seems that the problem is not big, but it won't work if it is not solved. After the red, you will help me graft the burning point of the cigarette butt to the top of the acceptable wood.

He could also see that this place was a bulge on the tree itself, which could not be carved. It was just that after being perfectly grafted with a burning cigarette butt after being popular, it seemed that the cigarette was shortened to the position of the cigarette butt in the hand of the statue. Perfect, absolutely no flaws can be felt.

There was only a problem with the position behind the statue.

This is a crack about one millimeter deep and two centimeters long. The scar is not too hurt, but it is not easy to cover up.

Staring at the damage for a long time, Si Fan thought of a solution.

"Red Queen! Try to change the cracks into clothes folds or the ripples of the clothes after the wind blows." Si Fan tried dozens of times again, slowly adjusting the final effect, until the moment when the final version was finalized, he was really It's hard to find a more perfect way.

After looking at the most pleasing design, Si Fan nodded.

"Okay! Just start processing according to this drawing, and you can tell me what tools or materials are needed!" Si Fan just finished speaking and saw that the two almighty Terminators have almost become artificial fixtures at this time. In almost the same action, the terminator picked up the wood and fixed it, and then saw two carpenter-type terminator standing on both sides and starting to quickly shape, cutting out the waste, and the waste was kept as complete as possible.

In less than five minutes, Si Fan saw a clear outline appear in front of him. There was a pile of waste underneath. By the time the processing was carried out to this moment, the sculpture could already be seen, the waste. Everything is done, and the finishing process is started.

I saw that the arms of the two carpenter-type terminator changed from the large cutting tools and quick cutters to small precision carving knives, and they began to finish machining.

The efficiency is so fast that Si Fan's concept of mechanical processing has been refreshed again and again, almost bringing out afterimages between the dazzling swings of the mechanical arms.The tools carried on a pair of arms are even more complete. It seems that there is no carpenter's tools that their arms cannot turn into.

When Si Fan yawned and checked the WeChat of his mobile phone by the way, the statue in front of him could be said to appear vividly in front of him. It was the image of a man in the middle of spirits, so confident and calm.It's just that the two carpenter-type terminator still didn't finish carving. Instead, dozens of pairs of carving knives as big as embroidery needles were unfolded from their arms to begin finishing.

Only then did Si Fan know that the Terminator had such demanding requirements for furniture.The current manufacturing is only a small shock, and the next fine craftsmanship is even more amazing.