Skynet Architect

The volcano was burning.The thick magma flows gurglingly, there is no strong wind or waves, that is because the weight of magma is not comparable to that of the sea and the sea. The fiery red color is golden when it meets the magma. There is a lava hell where it enters the eye. In the center of this hell, there is so A huge chimney, the chimney is very sturdy, can withstand thousands of degrees of high temperature, it is a spectacle in the middle of the magma, but this chimney is not really a simple chimney, there is a pipe above it, and the pipes are connected. In other directions, the huge chimney is fixed by the reinforced high-temperature alloy cables.

Of course, this chimney can also be said to be a pipe. The super hydraulic pressure with a pressure of more than 500,000 tons will release the power of this pipe to the maximum.

Pipes that are five or six meters thick are hoping to withstand the pressure of more than 500,000 tons.

But there is no one at the construction site, only the Terminator.

Hundreds of Terminators are hanging in the air, making up for leaks and adjusting the operation of the pipeline at any time.

Above, a huge factory has covered this area, and no one can know what's inside.

The dense smoke from the crater is directly accepted by a new type of super air purification plant. After the air is quickly purified, all the minerals produced are recovered, which produces a lot of things.

A large amount of materials are produced, and various pollutants from the volcano are decomposed and become substances in people's lives, and gradually become chemicals in life, playing an important role in life.

The garbage of the volcano turns waste into treasure, and other things needed are more easily obtained.

In this huge pipeline, the latest type of boiling liquid will be added at any time to increase the pressure of the entire facility below.

The internal device operation process is all tested and used according to the design of the scientists.

These devices have been tested by those scientists, and all tests from small to medium-sized have been tested, and the pressure has almost doubled.

Now it is officially running.

The huge machine did not evaporate smoke like a real steam-age machine, and it seemed to have a little bit less flavor.

In the distance, really far away, about a few kilometers away, Si Fan and a group of scientists were manipulating machinery in the control room.

"Mr. Si Fan, we can go to the vicinity to watch the operation of the machinery without being so conservative," said a scientist nearby.

Si Fan looked at him contemptuously and gritted his teeth and said: "Don't look down on your life like this. This machine is designed by you. Don't think of yourself as a copper wall and iron wall, but the opposite side is a machine that will cause 500,000 tons of pressure. If there is an accident, there are dangerous areas within one kilometer nearby, and even our bad luck here will be affected."

He was right, this is a power of 500,000 tons, and no one can ignore it.

The scientist next to him was silent, and Si Fan looked at all the data quietly.

"The temperature has risen to 1227 degrees, the instrument is operating normally, and pressure can be started," said a young operator on the side console.

Si Fan looked at the scientists around him. This project was not led by one person, and all started to develop slowly according to one person's will, and slowly started the project according to people's wishes.

Now they are the collective efforts of all the people, and everyone has their own ideas, and then see if they can have the opportunity to form this huge super forging factory.

After they slowly contribute their strength, the overall assembly becomes even simpler. Effective and efficient operation of the machine is their final goal.

Successfully forging the first workpiece is their goal.

Everyone is standing here waiting for the result.

"Starting." Si Fan ordered the operator to start the operation. There was only one operator and no one else helped.

When he starts up, all the devices are automatically running.

This is a fully automatic equipment, and definitely not for construction and operation.

But the materials have standard shapes, and when the blanks are fed, they are all automatically clamped.

Now when Si Fan ordered and started the machine, all the design drawings on this side were automatically entered, or samples were brought in, all the data was scanned and completely copied.

This mold is a very bad fluid style.

Si Fan was very shocked at that time. The whole mold used a special metal with high heat solid and liquid at room temperature. This metal was discovered only recently. It is a soft liquid in a low temperature environment, but when the temperature reaches 100 degrees, it starts to condense. , San Baidu becomes very hard, when 500 degrees, it will be hard to reach the level of alloy.

When the temperature rises to 1200 degrees, it is comparable to diamonds, and even stronger.

This magical metal is too easy to use in this environment, as long as it is molded at low temperature, fixed at high temperature, and then used.

The whole process is automatically operated by internal machinery, which is very convenient.

Si Fan watched a large amount of magma slowly flow into the groove prepared in advance, and gradually filled the huge container.

This is the core of the entire forging. The weight of magma is not comparable to that of water. There are also volcanoes here.

When the magma was almost level with the top, Si Fan's test data showed up.

"Enough for 500,000 tons," the operator said.

Si Fan gave an order: "Start."

The operator just clicked on the equipment.

When I heard the sound of "Boom! @!~", the huge pressure was released instantly, and the super impact force was briefly rubbed on the high temperature rail.

But the friction is not as big as imagined. The magnetic guide rail makes the track very stable, and then the huge impact force drops along the magnetic field.

The instant acceleration is quite domineering.

"Boom!" There was another sound, and Si Fan waited for the result.

Among the huge volcano, it was like an eruption, a violent eruption filled the sky with dust, and a huge earthquake seemed to have come.

The ground was shaking.

The operator looked at Si Fan for half a day.

"Boss, the process has been completed." He said, and then clicked on the next interface.

Si Fan just nodded silently and looked at the monitor. The workpiece had gradually begun to separate, and then began to the next process, the workpiece was going to be heat treated.

From Si Fan's point of view, this workpiece is a huge propeller blade, which should be used on a large ship.

He just took a closer look, and then waited to see the real thing.This creative power reminds Si Fan of the legendary Titan Hammer