Skynet Architect

"Boom boom boom!" Three times, the sound of knocking on the door sounded in the conference room, and then Si Fan and his secretary came in by pushing the door. After the two men came in, they went directly to the seat of the Lord, and then sat down.

"Hello, this is Si Fan. I think today's meeting can begin." Si Fana reached out and asked them to speak.

Professor Carlin was already ready.

"Dear Mr. Si Fan, the purpose of our coming today must be clear to you. We are going to complete the manufacturing of a new type of CNC machining center. In terms of specific parts, we need particularly high-performance parts and processing technology. We hope to seek cooperation. Mr. Fan’s factory manufactures the metals or parts we need.” Professor Carlin finished speaking and started to press the switch.

The PPT presentation is displayed on the computer screen. What is in front of you is a very high-tech machine tool. It was him who appeared at the beginning. He is about five or six meters tall and can process large workpieces.

"Our design is a universal machine tool. It can clamp large workpieces as well as small parts. At the beginning of the design, it was targeted as a world manufacturing and mother machine factory."

In Carlin's introduction, Si Fan also gradually learned about this super large machining center.

It's just that some things inside them still frown.

"It seems that all the cores of this machining center are extended around this universal joint shaft system, but other aspects seem to be no different from ordinary machining centers?" Si Fan said.

This is very important. During the processing, the current situation has not changed much, and the efficiency of work is still very low. In Si Fan’s eyes, this is a serious waste of his own resources. He uses top cosmic metals. Is this improving the processing ability so little?

Professor Carlin on the opposite side looked at Si Fan's obviously dissatisfied expression, and was a little frightened. He knew that Si Fan should be able to find a solution here.But obviously Si Fan's request is more than that.

At Si Fan's request, he suddenly thought of the fantasies of some former students and their professors.

It can only be said to be crazy, because these things are what they say it seems to be funny, and it can't be done.

But Si Fan said now, what would they do?

"Actually, we should be able to complete the overall design, but the requirements for materials and the technology used are really too high, and we can think of the future." Professor Karin is a very real person, completely seeking truth from facts. Explain with Si Fan.

Looking at the fairly satisfactory PPT in front of him, well, at least Si Fan seemed to be a satisfactory machine. He was more interested in that imagination.

"In fact, the materials we can provide to you are very, very special. If you can meet our requirements, our Skynet Group will provide you with this special metal."

"The number of materials is not a lot, maybe a little more than 100 tons, and no matter how much it is, there is no doubt about the performance of the metal. You can consider it to the limit of your ideal."

"However, the design must meet my requirements, otherwise you can only get the most basic materials provided by Skynet Group, that is, the high-quality alloys that we created in the volcanic furnace. These alloys should barely meet your requirements and can be used. For manufacturing."

Si Fan’s remarks made these professors’ eyes light up. She discovered that Skynet Group actually has something better. The best metal is actually limited in quantity, but it can be designed according to the limit of imagination. .

This is simply their gospel.

The things they consider will always be based on the current metal performance, adding to the current machine tool equipment.

And when Si Fan said it, the innovation in their heads was not enough, and they could only rely on their own students at this time.

He remembered that his students had said many unreliable ideas. Of course, that was his dream design a hundred years later.

He turned to look at his apprentice Carter.

This is a young man. He has deep knowledge, but he doesn't have much experience. He is an impulsive young man who is ignorant. He usually dreams and has ideas.

But his ideas are generally not very reliable.

Now that unreliable ideas meet unreliable projects, I can only see if I can see those metals.

He believed that if he could see those metals, he would have better ideas.

Carter never thought that he would have a show one day, he stood up in a daze, almost subconsciously, as if he was answering a question in class.

"Mr. Si Fan, I once imagined that the real CNC machining center should completely subvert the current form, from the clamping process to the real cutting process."

"Our current machine tool clamping uses bulky fixed clamping. When cutting, most of them need to be clamped multiple times, which will cause errors. If a multi-point clamping method is used, then This can be avoided. In other words, from the beginning, he has been flexibly clamped, after countless re-clamping." Carter is introducing his design.

Si Fan asked the system to help build the things he conceived.

"You said, I arrange for someone to do it for you on the computer, you can make subtle adjustments." Si Fan said.

At this time, Carter can freely describe the machine tool in his goal according to his own ideas.

The machine tool in his mouth is really completely different from what these professors said.

In his mind, this machine tool should be a 360-degree clamping without dead angles, and there are clamping parts in every position, just like a planet. The parts are clamped in mid-air, one day track and one month track. One of the two tracks is for clamping and the other is for cutting. They do not interfere with each other. The clamping tool is a small support frame, which is continuously supported by new support frames as the cutting. The support frame was removed.

The lunar rail is even more convenient. It is a continuously rotating cutter that works around the workpiece. No matter what kind of workpiece it is, it can be cut quickly. The tool change system of thousands of tools can make the cutting change. It's very easy.

This is the CNC machining center he imagined.

Rather than being silly and thick now, the machine tool is still clamped in the past. After processing half of it, it moves over and clamps and cuts the other half.

It not only affects a certain accuracy but also makes it impossible to use many shapes.

The design in his goal must be the best.

Even Si Fan would admire him, his idea is really good, as for the system of tool change.

Now there is something that can be used and can be constructed at any time, and the other parts are simple to say.If you want to match this cutting method, the complexity of the system used, and the solidity of the metal, it is very scary, especially for this cutting tool, how can such a small cutter be used!