Super manufacturing empire

Seeing that Zhao Ling was not angry, Yun Kai breathed a sigh of relief.

Women are not terrible, but women who are horny are terrible.

They were obviously kind, and I knew that Zhao Ling paid for herself, not to take advantage of herself. In this world, not everyone is like Wu Feng and Li Shufen.

"Oh, you can do whatever you want! It's necessary to entangle this with me here? Finished talking, if it's over, I can just drive..." Zhao Ling didn't want to entangle Yunkai with these things, it was quite boring.

"That's it..." Yun Kai rolled his eyes with depression.

Such an important thing, in the eyes of this woman, seems to be nothing at all.

"Forget it, after finding the factory, let's register another company. The company I registered is just for fun..." After Zhao Ling finished speaking, she started the car again.

In Rongcheng, this kind of thing is normal. A small company has several signs hanging on it. When different customers come, employees are asked to wear different uniforms to deal with customers. Generally, people who do this are skewers.

The rich lady wants to play tickets, and she doesn't bother to care about it, she can't control it at all.

"Longteng, Longwei, Yangzhong...Which factory are you going to rent? Some time ago, I asked, there are still places in these factories..." Zhao Ling said these are all privately invested industries by some local people. The park is a place where small processing plants that cannot build their own factories are concentrated. Relatively speaking, the prices are not too high.

"The factories in these industrial parks don't have any driving vehicles. We can carry the equipment weighing hundreds of kilograms?" This girl, don't you know that the work she is currently taking has high requirements for the factory?

Without driving, can the roughness of nearly one ton be moved to the equipment by hand?

"Without driving, we can consider making a gourd hanging ourselves..." Zhao Ling fully showed to Yun Kai that she is not a vase. To do this, some serious preparatory work had to be done.

"If we often deal with the processing business of heavy parts in the future, the hoist crane is too unreliable, so we should choose a workshop with a crane. The rent for a square meter is not more than two or three yuan, safe!" Yunkai does not want to save tens of thousands of dollars. You can drive your own car with a rent of RMB, if the maintenance is not in place or the design is wrong, this is a matter of life.

In the past few years, there were many small companies doing this, except for several accidents, which caused the small bosses to lose their money.

Money is second, life is important.

"I'm not saving rent for you! Now there are workshops for driving cars, and the general price is above 20..." Zhao Ling didn't know the doorway inside.

"..." Yun Kai really didn't know that the rent of the factory building is so expensive now.

"Then let's go to aerospace. Although their factory rents are a bit more expensive, other facilities are good, and there is no need to worry about peak power rationing..." Zhao Ling thought for a while and said to Yun Kai.

After the Aerospace Fourteen Group moved here as a whole in 1996, many civilian production plants closed down, the equipment was processed at a low price, and the factories remained vacant. Only in the past two years has they started to lease out their vacant factories.

However, because the price is higher than anywhere outside, there are always a lot of factories vacant.

"Their workshops are often thousands of square meters. Let's start with a maximum of 1,000 square meters. Will they agree?" It turned out that Wu Feng wanted to move the workshop into the aerospace industry because the aerospace management was not willing to go outside. Like these industrial parks, one workshop can cram several small factories.

In fact, according to Yunkai's vision, a 500-square-meter factory building is enough, not much at all.

They are taking a high-precision and high-difficulty processing route, and do not plan to rely on large quantities of standard parts for processing.

"Ask..." Zhao Ling was also not sure.

When I arrived at the fixed assets management committee set up by the aerospace industry, I finally saw the middle-aged woman in her forties who was responsible for the management of the leased plant, as if the whole world owed her money. When Yun Kai said that she wanted to rent a few hundred square meters The factory was immediately rejected by the woman without hesitation.

Even the two of Yun Kai said a few more words of kindness.

"Let's send money to the door, these people actually have such a face!" Zhao Ling was very dissatisfied.

This woman is too hanging.

"It's not for her to send money to her door! The more people renting their workshops, the greater their workload. Even if these workshops are not rented out for a square meter, their salary and bonus will not be less!" Yunkai said The matter is still very understanding.

A large number of business outsourcing in the aerospace industry, as a large number of workshops went bankrupt in the past few years, a large number of workers were laid off, and insufficient production capacity is one aspect. On the other hand, it is the problem of many state-owned enterprises' employees-laziness.

Every time the big leader asks the little leader, why haven’t these jobs been assigned to the production plan?The little leader immediately replied that our production tasks are too tight. Isn’t there a policy in the factory to force workers to work overtime...

Then, outsource.

Yunkai has worked there and knows the situation inside. The Aerospace Group strictly follows the five-day eight-hour work system stipulated by national laws. Many of the regular employees and many children have already settled down. There is no way to earn a few hundred yuan more. What thoughts.

A slightly more difficult job. Workers are afraid of processing problems and deduct their own bonuses. They directly tell their leaders that our equipment is not accurate enough and cannot guarantee accuracy. It is okay to do it, but let’s say that if there are problems in processing, no bonuses can be deducted. ...

Well, the accuracy of the equipment is not good. It is currently impossible for our workshop to add new equipment. If the precision machining workshop can't cooperate, let's give these products to the outsourcing supporting factory!

In the end, Yunkai made a good phone call and found a sub-leased vacant factory building of more than 1,200 square meters in the Zhongda Mould Industrial Park. The price was fair, 20 yuan per square meter, which is more than aerospace. The group's plant is a full four yuan per square meter cheaper!

"Master, aren't you busy right now?" After walking around, it is already eleven o'clock. If Yunkai cares about the price of the factory rent like other small bosses, it is estimated that there will be no ten and a half months, and the entire economic development zone Going around where there are factories for rent, and comparing them, I can't figure it out at all.

He couldn't complete Lao Maozi's order for three months, so he lost his nickname.

At this moment, he doesn't care about it anymore.

Zhao Ling is even more careless!In her opinion, the rent of more than 200,000 yuan a year can be earned back in less than a month...

"Why do you have time to come over?" Yunkai's lathe master Guo Guichuan is a great figure in the entire aerospace system. The aerospace 14 group's lathe workers have to test for technician or senior technician certification, and he will give him surprise training for a period of time before the exam.

However, most of the time, he still brings interns in the aerospace technical school.

Nowadays, many children who go to technical school are here for the diploma and rushing to find a job. Few people will study seriously.If the intern teacher is too tight, the children who are not afraid of these days will even do it.

When Yunkai and Zhao Ling arrived at the training base, the master Guo Guichuan was chatting with a few students at the gate of the training workshop.

If students are unwilling to learn, they are happy and relaxed.

Anyway, in any industry, the master leads the door and the practice is personal.

Those who are willing to learn, as long as there are any problems, the trainer will teach them without reservation. If they are not willing to learn, they will be forced to indoctrinate them, and there will be no half effect at all.

"You help me see this job..." Yun Kai took the drawing from Zhao Ling and handed it to the master respectfully.

When Guo Guichuan got the drawing, he frowned.

A skilled person looks at the drawings, and usually looks at the technical requirements and materials first. The most important processing content of the entire drawing is the last one.

"Russian?" After looking at it for a long time, the master asked Yun Kai in a deep voice.

"Nine out of ten!" Yun Kai replied embarrassedly.

"Baby, this job is not easy to do. This pure tungsten is too hard and has no toughness. When clamping, the clamping is too tight, it will break, the clamping is too light, it is easy to bite the knife, and the instantaneous impact force is too large. , Will be broken..." After hearing Master Yun Kai's words, Zhao Ling knew how difficult it is to process this job.

No wonder Yun Kai asked her to refuse from the beginning.

At this moment, my face turned pale...

"Master, now the contract has been signed. No matter how difficult it is, it must be adjusted. I think this way. Let's make an adjustable tooling, stretch the inner hole of the big end, and then top a small section. The outer circle will see light first, and then Clamp the entire outer circle with tooling, and turn the hole directly into place..." Yunkai was considering the process since seeing this picture.

"There is no problem in this way, but after you finish machining the inner hole, how do you machine the outer circle? How to process the 45-degree cone in the middle? If the process problem is solved, how can you solve the tool?" Guo Guichuan pointed to Yunkai Nodded.

There is no problem with this process. Only the entire part is clamped so that the entire outer circle is evenly stressed. When the inner hole is processed, the cone on the outer circle must have a stress point, so as to minimize the processing process The part trembles because the wall is too thin.

The trembling of superhard materials without toughness often has disastrous consequences-broken!

"The domestic ys8 welding blade is used for roughing, and the finishing can only be tried at that time..." Yunkai was also helpless.

"The ys8 wears out too quickly. If the knife is not changed in time, the knife will be planted..." Guo Guichuan murmured.

"There is no other way. For such a large part, the outside linear speed is too high... Rough machining can only be done with ordinary cars, and it is not certain whether finishing machining can use counting cars..." Yunkai is not sure now. Processing technology, time is too tight, and now I don’t even buy equipment...

Three months, only three months!

"This work belongs to Wu Feng?" Guo Guichuan put down the drawing in his hand and asked Yun Kai.

"Mine……"

Thank you for all the lie in fairy tales!Great rewards and evaluation votes.