Super military empire

"Do you want a full set of production technology for CNC machine tools? Including computer chip manufacturing technology and CNC machine tool automatic control technology and other related technical materials?" Liu Yijiu and the Soviets are also old acquaintances, although the time to deal with them is not long, but between the two sides They are all impressed.

For the top Soviet leaders, this young man has long been familiar with them.

Therefore, after the two parties set the negotiation time, there was no delay. They sat together and directly entered the subject.

Such negotiations are uncommon throughout the world.

However, Liu Yijiu was a little surprised when the Soviets demanded the manufacturing technology of CNC machine tools as soon as they came up.

Liege personally participated in the negotiation. The Soviet side hoped to set the negotiation site in Ulaanbaatar, but the Chinese side did not agree. A few years ago, KGB spies came to China to kidnap Liu Yijiu, almost It succeeded.

If Liu Yijiu runs to the Soviet Union, it is naturally impossible.

After discussion, and finally, after a short negotiation, the two sides negotiated at Karamay, which belongs to the Northwest Theater of China. A large number of military forces were deployed with the Soviet Union. Moreover, there have been no losses. The incident of Soviet tanks hitting the boundary between China and the Soviet Union.

In this negotiation, in order to ensure the safety of Liu Yijiu and the delegation, the entire Northwest Theater has maintained a high degree of tension. Even so, the Ninth Academy chose a large number of Longya special forces to ensure Liu Yijiu’s safety. A part of the black guards were mobilized to reach the border between Kazakhstan and China.

If the Soviet special forces can snatch Liu Yijiu from Longya and the Black Guards, the Black Guards in Kazakhstan will intercept and snatch Liu Yijiu back.

On the surface, it seemed a very simple negotiation. In private, the two sides maintained a high level of force mobilization. The top special forces and the top armed forces are all ready...

Liu Yijiu knows this. The negotiations on the Sino-Soviet border were opposed by the above, but he had to take risks. If the Soviets really had ideas, then...

Now it is about the manufacturing technology of CNC machine tools. Liu Yijiu knows very well that the Soviets have understood the benefits of CNC machine tools. In the past few years, they have been controlling the quantity delivered to the Soviet Union, which still has great benefits.

Can you give me this?

Hearing the other party's request, Liu Yijiu immediately shook his head firmly, "General Liege, even if we give you a full set of production technology, do you think your country can replicate our CNC machine tools?"

This is not because Liu Yijiu looks at the Soviet Union, but the Soviet Union has not enough time.

He didn't want the Soviet Union to leave Lao Maozi with the legacy of CNC machine tools!

"This is our business, Director Liu, since you asked us to give you the most advanced r-77 active radar guided medium-range air-to-air missile, you have to exchange it with technology too! Not only CNC machine tools, but also yours Electronic chip manufacturing technology..." Teslaf said to Liu Yijiu with an expression on your face that you have taken a lot of money.

Even Liege is a matter of course, "What is the purpose of you asking for this kind of missile from our hands? It is to defend our Soviet Union! Use our missiles to attack our air force. In the entire world, it is estimated that only you can come up with……"

These words made the Soviets laugh.

However, the Chinese who sat again did not laugh.

Since the Soviets are willing to exchange technology for technology, it is very likely that they simply did not care about the Chinese getting such missiles.

Either the technology of this missile has major flaws and the Soviets are sure that China cannot surpass them, or the Soviets have the means to effectively defend against such missiles, and at the same time, they have higher countermeasures.

"It is our business whether it can be produced or not. The industrial manufacturing technology of the Soviet Union is estimated to be less powerful than us in the entire world..."

"That's the case, but we can't agree to use a missile technology in exchange for our CNC machine tool manufacturing technology. We are all sensible people, not to mention, only in terms of electronic chips. The value of this technology far exceeds that of missiles. Value. Only with advanced productivity can we have more advanced and powerful weapons and equipment..." Liu Yijiu insisted, absolutely impossible.

The negotiations between the two sides reached a deadlock at the beginning.

It is possible for Americans to come to China at any time, and an agreement must be reached with the Soviet Union as soon as possible to obtain the manufacturing technology of medium-range air-to-air missiles from them, otherwise these things are useless!

Johnson also participated in this secret negotiation, the deal negotiation with the Soviets, he felt that he should be able to learn a lot from it.

Seeing that the negotiation had just begun to fall into a situation where it could not go on, he immediately put forward his own suggestion, "Or, instead of trading technology, we will directly exchange the finished r-77 missile with CNC machine tools. If possible, small general-purpose missiles. 5-axis CNC machine tools can also provide part of..."

Small five-axis general-purpose CNC machine tools, this is what the Soviets lack most.

These CNC machine tools can effectively reduce the cost of product research and development, and are much cheaper than the Soviet special-line production model. This is one of the final negotiation conditions.

Without technology, as long as the r-77 missile samples can be obtained, after several years of domestic research on the aim-54 missile, it is very likely that breakthrough progress can be made in a short time.Especially at present, Liu Yijiu believes that the performance of r-77 is not advanced enough. Although this missile is not necessary after launch, the hit rate is too low. The fighter can make super maneuvers to dodge and even speed. It can surpass the speed of the missile, and it can also launch a decoy to induce the missile to hit and the target to be detonated. If it is not improved, it is absolutely impossible to equip troops on a large scale.

It is used for shooting, and the effect is not very good.

"Five-axis CNC machine tool?" When Liege heard this, he was a little excited. The five-axis CNC machine tool is an absolutely prohibited product in the world. The Japanese have now disconnected the high-level CNC machine tool from the Soviet Union. The deal is a huge loss for the Soviet Union. Every five-axis CNC machining center produced in Europe is strictly registered.

If you want to reduce research and development costs, you must have a large number of five-axis CNC machine tools!

There are very few five-axis machining centers in the Soviet Union.

There is no source at all.

The entire Warsaw Pact, and even the previous China, took the same special plane production model as the Soviet Union. When a product was developed, the production line for manufacturing had to be established at the beginning, and once the product structure changed, the entire The line is also scrapped; and the route taken by the West and NATO is the manufacturing model of CNC machine tools. In the small batch production of a single room, it can effectively improve production efficiency and reduce costs, while maintaining high efficiency in mass manufacturing. The role of high precision to reduce scrap...

The poor financial environment, NATO's aggressive posture, and huge defense pressure have forced all departments in the entire Soviet Union to consider reducing costs.

Ever since, the five-axis CNC machine tool became an opportunity for the Soviets to improve efficiency and reduce costs.

In the entire world, only the Federal Republic of Germany, Japan, and the United States can manufacture high-precision five-axis CNC machining centers. The Soviet Union has no comparison because of its backward electronic technology.

The Chinese raised this, it is really beyond their imagination.

"Yes, the five-axis CNC machining center can provide at least fifty sets a year!" Liu Yijiu said with ease.

"We want to produce manufacturing technology!" Liege immediately put forward a non-descript request again.

Seeing this guy's expression, Liu Yijiu couldn't help but curl his lips. "General, do you think the production technology of the five-axis CNC machining center is as common as the Chinese cabbage in the Chinese market?"

"We can exchange x-22 cruise missiles..."

"We are not interested in cruise missiles, because although our navy is very poor, the threat from the sea is not great. The huge American warship is not our threat..." Liu Yijiu was extremely excited, but he But it didn't show up at all."We only need to be able to ensure our air supremacy..."

Just throwing out the five-axis CNC machining center made the Soviets so excited, Liu Yijiu already had a certain understanding of the Soviets' bottom line.

However, manufacturing technology absolutely cannot be given.

The large number of CNC machine tools sold to Lao Maozi every year is a good opportunity for China to earn foreign exchange through export.

At the same time, when exporting CNC machine tools, technicians need to go to the Soviet Union to assist in installation and training. Naturally, there will be more opportunities to contact some engineers from various secret units in the Soviet Union...

"Liu, you don't think so. Reagan's bastard and Elizabeth's bitch both publicly declared that they want to eliminate communism. They are not the same, they are our enemies!" Osipov frowned Look at Liu Yijiu, this grandson doesn’t sell five-axis CNC machine tools!In particular, the Soviet Union requested to increase the supply of three-axis CNC machine tools and four-axis CNC machine tools, but he rudely rejected it...

"We are a socialist country, and we are still in the primary stage of socialism. Our big boss has explained this several years ago. Our country's current task is not to engage in hostilities or form alliances with anyone. What we need to do is to develop our economy, solve the problem of food and clothing for our people, and build a well-off society in an all-round way..." Liu Yijiu seriously explained to the Soviets China’s interpretation of the state system and the country’s current situation. development strategy.