Super military empire

(Greatly added 19/100 for @liwers)

The five-axis CNC machining center was a must-have for the Soviets.

Otherwise, in the space race with the United States, the Soviet Union, which has insufficient funds and insufficient technical strength, will fail completely.

Although the Soviets also believed that the Americans were probably cheating on them, they would rather believe it. Moreover, the earth is too small to have much room for development in the Soviet Union. The footsteps of the Soviets must go to the moon and then conquer the universe. Just work!

Just these six five-axis CNC machining centers can save a huge sum of money for the Soviet space program!It can completely replace six special machine production lines!Even the processing of other Soviet missiles and difficult parts in aerospace can be done with this top-level equipment.

Obviously, the Soviet Union has realized that in the production model, their special plane lines are simply insufficient in this regard.

In particular, the replacement is very fast, large-scale tests are required, and the manufacturing of high-precision and sophisticated weapons and equipment that has not been finalized.

The five-axis CNC machining center obtained from Japan made them deeply aware of the benefits of this automatic machine tool.Now they can get more from the Chinese, so that many of their new products can reduce the cost of R&D and production lines and production lines.

"There is not much technical difference between Figure-22m1 and Figure-22m2. We can guarantee this, whether it is a supersonic penetration or a combat radius..."

"After that stuff is fully loaded, isn't the combat radius only more than 1,700 kilometers? General, even with the refueling of nurses, do you think, across the Pacific, how many air nurses need to be fueled by our bomber? The Anglo-Arab war has told us, the British In order to bomb Argentina, two Vulcans brought a large group of 11 Victory aerial tankers to refuel. However, in the end, what else can they do besides blowing up a few air runways? Or, you provide us with this kind of fighter. In order for us to run into the territory of the U.S. to release mushroom bombs?" Liu Yijiu said coldly.

"The range of the Tu-22m1 has reached 7000 kilometers! It is nearly twice as high as Vulcan! At the same time, the maximum ammunition capacity can reach 24 tons, which is far from the British backward bombers and modified tankers can compare..."

Liege felt that Liu Yijiu's head was pinched by the door.

Figure-22 Compared with m2, m1 has no improvement in technical performance!

"We cross the Pacific Ocean and are farther away from the American mainland!" Liu Yijiu still did not loosen up."We only need m2!"

"If you agree to exchange for m1, we can agree to let you drive back the fighter first, and let you test the voyage before we get these CNC machining centers and chips that belong to us..."

"We only need m2!" Liu Yijiu persisted.

"We can only provide m1, m2 are all arranged in various strategic locations, there is no possibility..." At this time, Lie Gesuo made his attitude clear.

It is impossible for the Soviet high-level leaders to agree to give the Chinese Tu-22m2, because each of these strategic bombers is arranged.

Only Picture-22m1 is available.

"Now you tell me this? The transaction is invalidated. We don't cooperate with insincere partners..." Liu Yijiu looked contemptuously.

Isn't this a reason to find a price increase for yourself?

Looking at the painful reaction on Liege’s face, Liu Yijiu was thinking about how much it would be appropriate to increase the price at this time. If you want to get things from the Soviets faster, you can only get them in the Komsomolsk on the far east side. Su-27 is definitely not expected, what else is there?

"If you just removed the aerial refueling device, your country only produced more than ten aircraft and started producing m2? Although our intelligence system is not developed enough and there is not enough news, we still understand these things..."

"How exactly do you want to complete the transaction?"

"This is not how I want to complete the transaction, but you were not sincere at the beginning. If you told us that it was m1 at the beginning, do you think we would just agree to sign the contract? General, I know that you have mobilized at least three If you want to use the force of a division, you can try..." Liu Yijiu said coldly, seeing Leonid’s reaction, immediately turned his head to face the people around him coldly. Said, "Go and tell Master Wen that once the Soviet army on the opposite side changes, all equipment and chips will be blown up. To ensure safety, first install bombs on all equipment..."

The people around Liu Yijiu went to arrange instead.

Seeing that the Chinese were not joking at all, Liege suddenly became anxious.

"Liu, what are you going to do to continue trading? We can add something to exchange..."

"What to add? The matching aerial tanker?" Liu Yijiu asked greedily.

When Liege heard this, the corners of his mouth twitched. Obviously, this product was meant to increase the price!Rather than really want to blow up these CNC machine tools, which are also not easy for China.

Japan has played a great role in China's reform and opening up. According to the analysis of the Soviet intelligence agency, it is very likely that it was because Japan did not pay the slightest compensation for its invasion of China. This was some compensation made after secret negotiations between the two governments.

No matter how strong the Chinese technology is, it is impossible to obtain the production technology of the five-axis machining center, but the production technology of the three-axis machining center is very possible.

The Soviet Union has no way to get advanced CNC machine tools. How can China get the production technology of five-axis machining centers?

As they guessed, these are most likely to come from Japan, and China should not get too much from Japan.

"It's the same way to increase the combat radius. How about giving you a cruise missile production technology? But the cruise missile production technology is obviously much higher than what you provide, so you also need to increase the price..." Measure the final hole cards.

Cruise missiles, this is a technology that the whole world is studying.

Liu Yijiu had no idea that the Soviets would give such a price.

"X-22?" Didn't the Soviet Union disagree?

"No, it's another one, but we haven't studied it. The technology of this missile is not very mature..."

Liu Yijiu's original joy suddenly disappeared, and it was obvious that the other party had given him a cruise missile that had not been successfully studied.The range will not be too high.

"There is no successful technology, even a finished product, General, do you think we are fools?" Liu Yijiu was immediately dissatisfied.

"No, this cruise missile is almost the same as the X-22, especially in anti-ship capabilities... It can reach speeds of Mach 4 to 5. Because of funding problems, it stopped when it was just successfully developed... "Liege's words made Liu Yijiu interested.

What kind of anti-sky missile in the Soviet Union was dismantled because its performance was not much different from that of the X-22?

Especially the speed exceeds Mach four.

Even if he racked his brains, he couldn't get the answer.

"There is a new type of engine equipped with this kind of missile. It is said that the technology is immature, which is because of the technology of this engine. Even without this kind of engine technology, the missile can reach Mach 3..."

These words immediately made Liu Yijiu's heart beat frantically!

Ramjet!

It should not be that the technology is immature, but that the other party will never give this top-level rocket engine technology to China.

Listening to what the other party said is to provide some basic technology to China.

With this technology, a faster cruise missile can be made!

Cooperating with the double-three project under study, it is completely a kind of existence against the sky.

"Give us the ramjet technology, deal!"

"We have not succeeded in researching this engine technology, but theoretically it can reach this level. Moreover, the Soviet military believes that this type of missile does not meet our requirements, especially when it exceeds the basic speed of Mach 3. The ignition was successful..." Liege did not expect that Liu Yijiu actually knew about the ramjet.

At this time, he even regretted that he proposed to the vampire boy in front of him that this kind of technology that encountered layers of difficulties in Soviet research had come out.

Ramjet, the full name of ramjet, is an air jet engine with a very simple structure, which can emit a lot of thrust, and is suitable for high-altitude and high-speed flight.

This is the top-level engine that many countries have worked hard to study after human beings entered the 21st century. In Liu Yijiu’s era, fighters basically used ramjet engines because of their good economic performance, especially the ionic ramjet. After the engine, the role of the fighter is even more prominent!

In the upper layer of the earth’s atmosphere, due to the action of the sun and cosmic rays, part of the air decomposes into ions. When these ions are recombined into molecules, a large amount of energy is released. Therefore, it is possible to inject a small amount of catalyst into the engine to make the ions Combine the molecules to release energy to propel the aircraft, so that there is no need to carry fuel.

Of course, this has very high technical requirements, and now in the world, even the United States and the Soviet Union can not achieve this!

If you want to reach or exceed the ten-fold factor, just materials can completely stop all countries!

Because, during this kind of ultra-high-speed flight, the high temperature generated by the friction between the engine wall and the air will reach 1000c, and the temperature inside the engine combustion chamber is as high as 2500-2800c.Materials that can withstand such high temperatures are currently only pure tungsten and molybdenum materials.

The melting point of these materials is high enough and has very good high temperature resistance, but there is a headache that can not be solved-the material density is too large, which is more than twice that of ordinary steel!