Unlimited Machine War

Biquge www.xbiquge.cc, the fastest update of the latest chapters of unlimited machine warfare!Under the busy days and nights of countless people, the three years of stay in the camp territory passed by in a flash. In three years, because of the integration of technology, the power of the war technology system of the ship regiment has increased a lot. Materials, weapons, and energy have all been significantly improved.

But there are also products that cannot be replicated within three years, the Getta Ray.

Even if we have completely analyzed all the technologies contained in the trial-built Getta through these three years, Luo is even sure to be able to produce a more perfect body than the trial-made Getta, but because the energy body of Getta rays cannot be replicated. Under the circumstance of, even if a more perfect body is created, it cannot become a real Getta because of the Getta Ray.

According to calculations by Luo and his subordinate researchers, it will take seven years to replicate the Getta rays at the current speed. Xiao Ran does not know how many years it took the doctor of Getta World to replicate the Getta rays, which can be assembled. It will take seven years for the strength of all the territories of the entire legion so far, and the total time for ten years is already very long.

It is not difficult for the entire research department to completely crack the other technologies of Getta. In addition to Getta rays, the technical content of other places is not as high as expected, even if it is 0079 World. The technical level can be completely analyzed, and the only thing that is really special is the Getta ray.

In comparison, the technical content of Getta NEO at the purely technical level is higher than that of Getta, but Getta NEO is also completely analyzed. In terms of materials, it is made of Getta active alloy. The most difficult point of the relationship has been determined, and other technologies are really nothing to the current scientific research force.

After the first year of the Getta NEO trial machine has passed, a total of three generations have appeared in the territory. The first generation of Getta NEO trial machine is completely a product manufactured by imitating the Getta NEO, except for additional weapons. Slightly different, there are more beam rifles, beam sabers, and beam weapons that can be used in all three forms. Even after deformation, the appearance is not much different from that of Getta NEO.

In this generation, the territory actually has all the capabilities that can manufacture Getta NEO, but the department that can develop Getta NEO fuselages is not satisfied. This is just the case. According to the current situation of the ship group, the second research and development has been carried out again. , The second trial machine offline is only half a year from the first trial machine offline, but the second newly developed trial machine is far different from the previous version.

The concept of the first generation is to copy, and the concept of the second generation is to merge, so that the three units of Getta NEO have excellent individual combat capabilities even when they are separated. The integration of existing ships is also a fighter. In the circumstances, letting the three combined fighters also have the ability to deform has become the key goal of this research and development.

After half a year of research and development, the flexible use of Getta alloys means that the first test machine of the Getta NEO II completely re-developed and manufactured is off the assembly line, combined with the current deformable fighter technology. The product of the fighter jet has a very big difference from the Getta fighter, and it already has many features of the VF-30 series of ship group deformed fighters.

In the end, the experiment was successful. Three fighters with three-stage deformation capabilities were successfully combined into a brand new tower. The new tower looks completely different from the NEO. It has a thinner body and a deformed structure. The skeleton was also exposed in many places. This is a complete test machine, not even equipped with a weapon.

However, it took a year for the final product from the second generation to the third generation. The entire year was just a supplement and improvement to the second-generation test aircraft, which was less than the time it took to directly construct the new fighter aircraft. There are longer, but the final result is extremely gratifying.

The final new machine completely abandoned the name Getta, because this machine body has nothing to do with Getta, except that it can be combined with three machines like Getta, and it has become a completely new series.

Before being combined, the three fighters have the same three-stage deformation ability as the general transforming fighters. The fortress form, the MS form and the fighter form are the same, but the appearance is more different from the general fighters.

The three newly-manufactured combined fighters are different from each other. They all use Getta alloy as the outer armor. The ductility and flexibility of the alloy are combined with a multi-stage deformation structure to achieve the purpose of deformation, and they are all compared with normal deformation. The fighter plane is slightly larger.

The first machine is a high-speed machine. It has seven layers similar to the ancient VF-4 model, but it has to be more streamlined, bigger, stronger and heavier, and naturally looks good and domineering. Many, with a small, retractable and foldable flying wing, using the modified beam Green gun, the rear thruster module is obviously stronger than the normal body.

After the body is more deformed, the body shape will naturally be larger, but even so, the feet look a bit thicker, and some weapons are added, such as two round small positron guns, and these two small positron guns It directly replaces the arm, and the palm of the hand is directly'grown' out of the muzzle of the positron gun. It can be'retracted' when not in use. In addition, the positron gun is the two arm mounted on the wrist. The beam saber, the ability to fight alone is not inferior to the normal deformed fighter.

The second machine is a multi-purpose machine, which can increase reconnaissance equipment to become a reconnaissance machine, and can use a sniper rifle to become a sniper machine. The stealth performance is the best among the three machines. It may also have a lot to do with the shape of the machine. A mirage system was also installed, and the amount of weapons carried was the least.

In addition to the standard missile launching capability, beam saber, beam guns for both doors and other bodies are installed on the body of a single body, all other weapons will be matched according to the individual needs at the time of the attack, according to the occupation or personal ability selection Sniper rifles, beam cannons or standard beam guns, etc., so both the appearance and use emphasize special and universal.

Special refers to giving the body itself or giving special abilities after being combined, such as the Mirage System, Solar Furnace, λ-DRIVER, and the launching device of thermal energy rays, the Secmeus system that can be used by ordinary people, all two These are all installed on the number plane, so the body itself does not have the conditions to install other weapons. It can be said that the driver is the most selected but the driver is the least.

People who can use the power of λ-DRIVER can use the capabilities of this machine, and those who cannot use λ-DRIVER can also use it.

In terms of styling, the general shape of the VF-171, which has been the most versatile and has undergone several evolutions, has undergone some unique transformations due to the need for combination, resulting in some changes in the appearance of the body, and the size is as large as the first machine One circle and a few more interfaces.

The No. 3 machine is a complete heavy-fired machine with the most powerful firepower and the most powerful energy. It can be regarded as a weapon arsenal in itself. Its appearance refers to the VB-6K?nigMonster, but its structure It has been remodeled and equipped with beam-facing armor. Its defensive power and firepower are the highest among the three airframes, and its flexibility is the lowest.

Missiles, beam cannons, positron cannons, GN dragoons, solar furnaces, beam deflection armors, have the ability to launch large missiles, namely MED warheads or reaction bombs, and are fully extended in the direction of firepower and armor.

All three airframes use Getta active alloy as the armor material, so it is not surprising that the armor changes from square to round due to the deformation of the internal framework during deformation. VPS and energy conversion are added. The armor serves as a support, so there is no need to worry about the strength of the skeleton and the armor.

The three fuselages also have three different forms after being combined. The first machine is the general combat form. After the combination, the feet of the first machine become the arms of the combined machine. Two positron cannons will appear on both sides of the head. Unit No. 3 is in the middle, Unit No. 3 is at the bottom, Unit No. 2’s flying wing becomes the rear and body’s flying wing, Unit No. 3’s arm becomes a skirt and shield with beam deflection armor ability. Weapons are both near and far. Yes, the original beam green gun has become a huge beam saber, the most versatile.

The head of the No. 2 unit is the empty space combat form. Because of the relationship between the No. 3 unit and the middle, the feet of the No. 2 unit originally became a pair of adjustable flying wings. The No. 1 unit uses the highest propulsion capability to make this form. Get the fastest speed in the three forms, but do not have too strong land combat capabilities, the main attack method is shooting, and can maximize the effect of λ-DRIVER.

Unit 3 as the head will get the strongest firepower in all forms. Four cannons that cannot be used in other forms will be extended. All weapons of the body will be used. The main attack methods are fire coverage and Fire bombing.

In general, the No. 1 form emphasizes general-purpose capabilities, the No. 2 form emphasizes high-speed combat capabilities and special operations, and the No. 3 unit emphasizes maximum firepower, even when separated.However, no matter in which form, once the mirage system is combined, the solar furnaces installed on the second and third units can also get the same frequency. With the aid of the third unit, the mass production of Harrow and GN Dragoons Use is not a problem at all.

This new body is named CD-1 type, also known as the Guardian Type 1. The three machines are separated into the C machine body, and after the combination, it becomes the B machine body, perhaps because it is in the realm of the real estate. It is built, so it is also evaluated according to the level of the real zone.

After the completion, only fifteen sets were manufactured before and after, one of which was taken over by Xiao Ran and placed on the Galaxy Diva. Ayl Elf drove the first plane, Moses drove the second plane, and Billy drove three. Number machine.