Intelligent Industrial Empire

Yun Fei didn't expect things to become like this. In any case, he didn't want to understand where those machine tool manufacturers were looking for servo motors, ball screws, and high-precision positioning rotary tool holders in a short time.

For a long time, because Japan is close to China, especially the northeast of China, the Northeast No. 1 Machine Tool Plant has been purchasing CNC systems and the most critical parts of CNC machine tools from Japan in small quantities.The Northeast No. 1 Machine Tool Factory wants to purchase in large quantities, but the little devil is more cunning than Hou. How can we export CNC systems and various key parts of CNC machine tools to China in large quantities?

In that way, Guizi's whole machine exports will be greatly affected.

With the emergence of Long CNC system and the rise of Huadu CNC, Guizi can no longer take it lightly.Several developed countries that had always monopolized the control of CNC machine tools and CNC systems on the Chinese market, after the number of those who are not inferior to their mid-range systems, Long CNC, which has a very disgusting name, began to appear in large numbers. Opened the control of low-end CNC machine tools and various key accessories.

Among them, the most important role is played by Guizi's major CNC system manufacturers, such as FANUC and Mitsubishi.The emergence of a locally-developed CNC system in the Chinese market is an accident. You must know that the Chinese have been looking for their CNC system technology. It is impossible to quietly come up with a mid-range CNC system, not just lathes. System, and milling machine system.

With the system, China's research on CNC machine tools will no longer be restricted as before.

Taiwanese have sold a large number of hardware systems such as the most important chips for the CNC system to Huadu CNC. They have not considered the feelings of the owner. Therefore, the Japanese are very upset, but there is no way to do it. In this era of globalized economy, Companies that produce the hardware necessary for various CNC systems are not only available in Japan.Over the years, Taiwanese have been very close to their masters.

Taiwanese have already obtained the production technology of those low-level hardware a few years ago.Moreover, if the devil wants to punish his younger brother, he has to ask his master whether he agrees.

Therefore, Guizi began dumping a large number of low-end CNC machine tool parts in the Chinese market.In order to cope with the bad changes that Huashu has brought to the Chinese market, Guizi's mid-range CNC system has gradually begun to loosen restrictions on China.Especially after knowing that the young man who caused the rise of Huadu CNC in an instant went to Rongcheng to set up a mechanical processing factory, or a heavy-duty processing enterprise that produces machine tools, and several Japanese machine tool manufacturers who have always looked down on Chinese machine tool manufacturing are angry. .

In order to punish the young man who disrupted China's CNC machine tool market, and also to prevent China's self-developed road, Guizi's various accessories appeared in China, and Taiwanese accessories began to be supplied in large quantities.

Proud Germans don't care about the emergence of a CNC system manufacturer in China.Their system is the best in the world, and their CNC machine tools are also the best in the world.The Chinese, who cannot even produce the key parts of CNC machine tools, do not believe that the Chinese can produce high-end CNC machine tools in a short time.

If it can be produced, the Chinese will not buy four-axis and five-axis CNC machine tools everywhere in the world.

Through Ren Zhiguo, Yunfei finally understood why so many CNC machine tool manufacturers suddenly emerged throughout China.These CNC machine tools are the most low-end EDM, wire cutting, and CNC lathes.

After knowing what was going on, Yun Fei was extremely upset.

You can't take your own world to take it for granted.

You know, it is now 1993. Although the GDR and the Federal Republic of Germany are eye-catching, they have not merged, and the Berlin Wall has not been overthrown. The Soviet Union’s Balgochev still stays in his own world in the Kremlin, which does not belong to him. Inside the palace; Yeltsin is still working hard for his rights.The third Iran-Iraq war that should have ended long ago is still going on in full swing.

With self-knowledge, Yun Fei knew that this world was not like this unexpected butterfly flapped its wings and changed.At least, the foreigners he has come into contact with are really no one except Smith and others who pretended to be the Deere company investigation group.It is even more unlikely to be related to the situation in the Middle East.

Bargochev did not agree to the referendum of several Mediterranean countries like in the world of Yunfei, and he has been severely cracking down on the forces that divide the country.Although the entire Soviet Union is now in chaos, thanks to the efforts of the mighty Gorbachev, the sickle and hammer flag over the Kremlin is still flying high.

The Iran-Iraq War is still going on because Iraq has the support of the Soviet Union. The United States, which originally supported them, turned to support Iran.The Iran-Iraq War, which started in 1980, should have ended in 1988, but now it is about to fight for another five years, and there is still no end to it.

Although the people in both countries have already made a living, both countries have rejected the mediation of the international community.Although the two countries have not announced the end of the war, they just fired a few shots at each other's border at intervals. As long as the two sides of the border are still shooting at each other, it is still a war, isn't it?

The Iran-Iraq War is not over, and each has national support. Saddam in Iraq did not invade fraternal countries in 1992 because he was jealous of Kuwait's wealth, like in the world of Yunfei.

This world is a strange world to Yun Fei.

Although in many aspects it is different from Yunfei's own world in terms of major events, the technology of this world is still similar to that of Yunfei's world.

Since this time, Yun Fei has been learning about the world through Zhao Xingbang and Ren Zhiguo.

He only discovered now that he had been in this world for almost two years, and he had never understood this world.

He missed his world very much, missed Duniang, and missed everything.

Yun Fei doesn't have the habit of reading newspapers. In his world, newspapers are just things for the elderly who don't know how to access the Internet to kill time.Du Niang is in hand, I have the world.No matter what kind of things, Du Niang came to tell.

After coming to this world, even though he knew from the time that the Soviet Union did not disintegrate, this world is not his own world, but Yun Fei still intends to look at the development of this world based on the historical development of his own world.In addition, the newspapers are only occasionally read, and TV is not even watched. Since he came into this world, Yun Fei has never been idle except for a day or two when he just returned to the depths of Daba Mountain.

In the busy, time always flies so fast, unknowingly, I actually came into this world for two years!Yun Fei sighed while rubbing his head.

"Shuang'er, inform the leaders of various departments to have a meeting in the conference room at 8:30 tomorrow morning." After digesting these things, Yun Fei sighed. He had never experienced any major battles in his previous life, even though the company was at that time. When he was acquired, a small technician of his, apart from a small amount of inside information, he didn't know how to operate it.

The products in the factory have just been produced and are facing such a bad situation before they are listed. Yunfei knows that the only thing that can get Jiuyi out of the predicament and escape the fate of bankruptcy as soon as the product is launched is to quickly develop the three-axis. CNC milling machine and CNC machining center.

If Yunfei did not relocate Jiuyi Heavy Industry in the economic and technological development zone of Rongcheng, he would not face such a dilemma at all.

The general machine tool market in the entire southwestern region is firmly controlled by the South Dian Machine Tool Plant. Rongcheng is far from having as many machining companies as later generations, ordinary lathes produced by Jiuyi Heavy Industry, in this era, it has no reputation. There is simply not a big market.

CNC machine tools are all at the same starting point, but the unfamous Jiuyi Heavy Industry, even if the equipment produced is better than those produced by the old machine tool factories, but there is no reputation and no old customers, there will be no big market at all.In this era, the cheapest ordinary CNC lathe cost more than 80,000 yuan!

In the era when the per capita salary had not exceeded 300, RMB 80,000 was still a huge sum of money.

In the world of Yunfei, many small processing workshops with only one or two machine tools existed because of the machine tools of that era. Although the price did not change much from this era, the per capita salary at that time was already ten times lower than that of this era. More times.Anyone can come up with the funds to buy one or two machine tools. It really doesn't work, can't you still find a bank loan!

"Everyone, I invite you to the meeting today. I just want to tell you that now our Jiuyi Heavy Industry is in a critical period of life and death!" After the heads of the various workshops and departments of the company arrived, Yun Fei was straight to the point. Explained the difficulties faced by Jiuyi Heavy Industry.

"Boss, don't you scare us, just a few days have passed?"

"Aren't we just developing CNC lathes? The national CNC machine tool market has always been in short supply. In addition, our CNC lathes are not only of good quality, but the price is even tens of thousands of yuan cheaper than those imported from abroad... …"

Hearing Yun Fei's words, these middle and high-level managers who had just been paid a few months ago suddenly became anxious.

"Quiet..." Yun Fei patted the conference table heavily, quieting the heads of the various departments who were whispering or questioning him loudly.

"Maybe everyone does not know that there are more than a dozen manufacturers of CNC lathes in China. Aside from the Northeast No. 1 Machine Tool Plant that has been producing, even our neighbor, Diannan Machine Tool Plant, has half of their CNC lathes. I appeared on the market a month ago. Today, I want to ask, do the people in the marketing department only know about food? Why do we never know about such important information? No one has ever notified me! Why do I support you? "For the management of the company, Yunfei is really not good at it.