Intelligent Industrial Empire

For the price of a lathe from more than 110,000 to more than 180,000, few customers would feel that the CNC lathe produced by Jiuyi Heavy Industry is not worth the price.

The grades are different, and the price of course cannot be the same.

You know, the price of imported CNC lathes in the same gear is basically between 160,000 and 240,000!There is still no choice.

Not to mention other things, as for the tool positions of the rotary tool post, most of the imported CNC machine tools are ordinary turret tool posts that can only hold four tools. Some of the processing techniques are more complicated and require precision. On relatively high parts, the ordinary tool post CNC lathe that can only hold four tools at a time, there is no way to clamp the workpiece at a time, or install enough tools to process the parts at a time.

In this way, only sub-processes can be carried out.

Everyone who works in machinery knows that the more complex the product is designed, the higher the accuracy requirements.If the processed product can meet the design requirements, it requires the production process to ensure the processing accuracy.

The production of large quantities of parts is okay. In the worst case, a few sets of high-precision tooling will do, but small quantities will not work.The higher the accuracy of the product, the higher the accuracy requirements for tooling.The higher the precision of tooling, the more difficult it is to design, and the more difficult it is to design, the more difficult it is to process, which ultimately reflects the high cost of tooling.

Especially in the emerging mold industry in the entire Pearl River Delta, their requirements for CNC machine tools are even more abnormal.

Simple cold stamping dies are fine, but for those plastic molds and precision casting molds with high precision and complex curved surfaces, there is no way to make precision molds that meet the design requirements without high-precision processing equipment.

Although the accuracy of imported CNC machine tools can be guaranteed, the price is a bit too unacceptable, especially since the agents have to earn a large amount of import fees for each machine.Now the CNC lathes produced by Jiuyi Heavy Industry have given them hope.

Mold production is a small batch production of single pieces.The machining accuracy of many parts inside is very high, especially for some key revolving mold parts, a CNC lathe with a multi-tool turret tool post is required to ensure various fit tolerances and geometric tolerances of the parts.

The chucks and multi-tool holders controlled by the hydraulic system of Jiuyi Heavy Industry, which are only used in foreign medium and high-end CNC machine tools, not only don't need to pay the agent's agency fee, but the price is also cheaper than foreign CNC machine tools.Although the production quality of these CNC machine tools may not be more reliable than that of imported machine tools, Jiuyi Heavy Industry has an office in Huadu, and there are several professionally trained maintenance personnel on standby!

"Director Jiang, when will our ten beds of Xinkaixing arrive? It has been more than two months. Both bosses told me that your equipment has been released from the earliest when it was not ready for the market. The fifty CNC lathes to Huadu have specially mobilized ten for Xinkaixing. Shouldn’t you stop them?" Zhou Bin, Xinkaixing’s factory director, is now facing the Jiuyi Heavy Industry Station with a cold face. Asked Jiang Jianxing, the person in charge of Huadu sales point.

"Lao Zhou, this train is not ours. It's not that we want it to be transported as soon as possible, so it can be transported. Wait a minute..." Jiang Jianxing was guilty of this right and wrong. The manager of a mechanical processing plant with a small share of shares said with a smile.

Originally, Jiang Jianxing was appointed as purchasing director by Yun Fei, but at the beginning, Jiang Jianxing always went to various factories producing machinery parts along the coast to conduct inspections, while promoting the machine tools of Jiuyi Heavy Industries, so in the end, he simply put them away The purchasing director was improper, so he applied to Yunfei to get Huadu, which has caused him a lot of hardships and crimes, and the drunken city became the person in charge of a small sales point.

Of course, he also has to be responsible for the procurement of some electrical products of Jiuyi Heavy Industry here.

A large number of electrical equipment can be used on a CNC lathe. If only the more than one hundred people in the electrical production workshop of Jiuyi Heavy Industry, it is impossible to produce hundreds of electrical equipment. Things can't be mass-produced with technology.

"Don't tell me that the train is late! Don't think that I didn't know that you sold the CNC lathe that was supposed to be for us Xinkaixing! Either you will give me ten sets today, or I will call the boss Yunfei Let him comment on this theory for us! The self-produced things are sold to our competitors instead of focusing on their own use!" Zhou Bin stopped being angry when he heard Jiang Jianxing's words.

Xinkaixing has now focused on the manufacturing of shoe-making equipment from the processing of single parts and components.

In Huadu, the labor cost of the entire machining industry has been reduced by several percent compared to the original. Xinkaixing, under the guidance of Yunfei's telephone, shifted all the focus to the business of CNC machining.Now the entire Xinkaixing precision machining workshop, with more than 40 CNC lathes, more than 20 CNC milling machines and machining centers, plus EDM, wire cutting and other equipment, has hundreds of CNC machine tools.

In the entire Pearl River Delta, Xinkaixing has become a machining factory with the largest CNC machining capabilities.

From the very beginning, when Wang Qingfeng called and said that he had ordered ten CNC lathes from Yunfei's Jiuyi Heavy Industry that were more advanced than imported and capable of holding ten knives at a time, Zhou Bin became excited.

The current Xinkaixing is not what it was a year ago. At that time, basically what kind of business would follow. Now Xinkaixing’s ordinary machining workshop has been reduced to a workshop dedicated to rough machining, and even a lot of production precision The machining operations that are not high and the production volume is not large are all signaled by Yun Fei that they are transferred to Yu Deshui, who already has more than 20 machine tools of various models.

Zhou Bin has been the director of Xinkaixing for more than a year, but few people think that the reason why Xinkaixing has developed to the present level is the result of his hard work.Many people believe that the development of Xinkaixing to the present level is the foundation laid by Yunfei, a young and old factory director.

Therefore, when he discovered the prospects of the mold industry, Zhou Bin called Wang Qingfeng several times, requesting the establishment of a special mold workshop in Xinkaixing, and personally sent a list of CNC equipment for purchase to Chengdu.

When I first saw the purchase list, Wang Qingfeng, who has always regarded himself as a nouveau riche, was frightened by the total price of the equipment listed above!

The price of three four-axis four-linked machining centers is 25 million; five Taichung precision machining centers are five million, and ten German mid-range CNC lathes are 3.2 million...

The total price of all kinds of equipment in the purchase list exceeds 35 million!

Finally, after Wang Qingfeng told Yun Fei of Zhou Bin's ideas, he did not expect Yun Fei to support it.However, three four-axis machining centers were changed into one, five machining centers became three machining centers, three CNC milling machines, and ten CNC lathes were directly crossed out by Yunfei.

After Jiuyi Heavy Industry's 6132 CNC lathe was finalized, the first batch of 50 units were sent to Huadu, and 10 of them were allocated to Xinkaixing.

"Uh, Lao Zhou, for this little thing, it’s not good to alarm the boss. You know, my boss is also your boss. We earn our family’s money. That’s not interesting, isn’t it? Yes, you can wait for a while..." Jiang Jianxing didn't want such small things to make Zhou Bin riot in front of Yun Fei.

If that's the case, I will definitely be transferred back to Rongcheng by Xiaoyun. If that's the case, then...

"I don't care what you say, this time there are 30 more sent to this side, I don't care who intercepted you from me, anyway, I won't leave without seeing the bed..." Zhou Bin Saying nothing this time will not agree to Jiang Jianxing's interception of Xinkaixing's equipment to other manufacturers.

Now he is not only doing foreign trade products for old customers, but a guy in the business department has helped to get many large German and American machinery companies who are unwilling to make their own products because of cost issues through a relative abroad.

If possible, Zhou Bin even hopes to add ten more CNC lathes.

Now the business in the entire factory is accumulating more and more. Many high-precision products are made with ordinary CNC machine tools in those workshops, and the efficiency is too low.

"Five, at most five..." After some bargaining, Jiang Jianxing could only helplessly stretch out a slap.

Zhou Bin pulled five CNC machine tools back to Xin Kaixing with dissatisfaction.

"Manager Jiang, you are too unkind to do this, right? We said yes at the beginning, why is there only one left of the three CNC lathes that should have been given to me now?" a middle-aged man with a big belly pointed out Jiang Jianxing exclaimed dissatisfiedly.

"Oh, boss Zhu, you also know that our Jiuyi Heavy Industry is just a small factory with more than a thousand people. The production capacity is inherently insufficient. The three CNC lathes with the highest configuration you want have a long production cycle and assembly. In this regard, we need the most experienced level 9 fitters. Our factory has more than a dozen level 9 fitters. Up to now, only more than 20 CNC lathes with the highest accuracy level can be assembled in a month... Mr. Zhu, I have just arrived here with a few 6140 simple CNC lathes with 1 meter guide rails. The price is the same as a standard 6132 machine. Would you like to do it?" Boss Zhu of Jianyu Machinery Company of CNC lathes, Jiang Jianxing really can't explain.

This guy, who also does CNC foreign trade processing, has a girl who goes to school at the Krupp Institute of Technology in Germany, but she does a lot of good work for him. Therefore, the demand for CNC lathes will never be satisfied with this product, especially this product often helps the person being engaged in CNC machine tools.