Intelligent Industrial Empire

peat!

The Second Artillery has been changed!

This is the second artillery!

China's most mysterious strategic missile force!

Almost all high-end heavy-duty strategic equipment belongs to this force under management!

This army was piled up with money.Hasn't the country shifted its strategic focus to the economic field?Where did the huge sums of money come from to carry out a full refurbishment of the entire army?This is not scientific at all!

What new stuff will the Second Artillery Corps equip this time?

Is it the Julang series or the Dongfeng series?

Julang's stuff is too rubbish, it is probably the Dongfeng series, but I don't know if it is the Dongfeng series A, B, or C?

The Second Artillery Corps is a domestic strategic missile force. What kind of killer weapons are specifically equipped? It was not revealed until the parade of the National 50th Anniversary Celebration when the century was about to cross.

China's most deterrent strategic missile, Dongfeng-31, has an effective range of 8,600 kilometers and an accuracy range of 100 meters. With a nuclear warhead, it can cover most cities on the west coast of the United States!

Could it be that all the money saved by the military over the years was spent on this change?

Since the reform and opening up, the military has engaged in a lot of sideline business. Kmart is just one of them. In recent years, Kmart alone has provided hundreds of millions of funds to the military!

Of course, these strategic big guys are very expensive.Without the internal fuel, just some shells and engines, it costs tens of millions!Of course, if you remove the profit and various additional costs, millions can be produced.

"A few thousand kilometers? Boy, you still don't know about this!" Li Zhongwei said to Yun Fei seriously.

This is a real military secret.

This is the case in any country. When there is no accident, everyone thinks that he can afford it. If something really happens, Li Zhongwei, the military tycoon, can't handle it either.This is the country's top military secret!

The mystery of the Second Artillery Artillery Corps will not be revealed until the 50th National Day Parade, which is about to enter the 21st century.

It was at that time that China's Dongfeng series appeared in the sight of the people of the world!

"Cut, I don’t know if I don’t know. Just hold your hands as if you were a baby, and didn’t look at Ren Lao Maozi’s Baiyang-MD missile with a range of 14,000 kilometers? Does anyone keep it secret? Where is the deployment? Any corner of the earth is within their attack range. Didn't you dare to challenge Lao Mao who is now too dilapidated without looking at Lao Mei?" Yun Fei curled his lips.

A lot of things in China are just like a baby bump.

If there is a strategic missile with a range that can cover the whole world, hidden and tucked, others will not treat it as a thing at all.If people know that China has such a thing, can they not consider it when clamoring against China?

Didn't see China when these strategic missiles were not in the sight of the world, did Uncle Ohm blow up all the Chinese consulates?

"Do you really plan to export the equipment you are producing now and the equipment that is still in the development stage to these countries?" In order to divert Yun Fei's attention and avoid this kid asking about some state-level military secrets, Li Zhongwei instantly changed the subject. .

"If someone buys it, let's buy it. This thing is not an advanced thing!" The equipment developed was originally for sale.

Someone waved a lot of banknotes to buy, how can Jiuyi Heavy Industry not sell it?

Isn't this having trouble with yourself?

................................

"Everyone, this is our processing center assembly workshop. According to the plan, within two years, our Jiuyi Heavy Industry will build an annual production capacity of 2,000 processing centers, and the annual turnover will exceed one billion yuan..." A group of international friends with different skin colors visited the newly established constant temperature assembly workshop.

While visiting, I explained each assembly link to these international friends who had only heard of high-end CNC machine tools but had never met.

Listening to their translators telling them about the various processes, these international friends did not show much serious listening expressions. What they were most concerned about was the processing capabilities of these equipment.

Due to the small land area, sparse population and weak industrial foundation, their machinery manufacturing capabilities are not very strong, while CNC equipment is the embodiment of a country's comprehensive national strength. It requires not only a deep industrial foundation, but also electronics, electrical, and computers. And many other industry technologies.

They know their own business, and they know that even if they can produce such high-end manufacturing equipment independently, it is impossible to form a large-scale production in a short time.

In particular, Iraq and Iran, two military powers that once ranked among the top in the world, the eight-year-long Iran-Iraq War in the 1980s not only caused the loss of their high-end combat capabilities, but also made their industries and economy. It's been decades back.

Machinery manufacturing capacity cannot be improved in just a few decades.

Especially the training of the most critical skilled workers in machinery manufacturing requires more time and money to train.

Not to mention the manufacture of aircraft and tanks, at least, the guns must be built by yourself!

Just because they couldn’t make it themselves, they couldn’t make anything. After eight years of the Iran-Iraq War, Iran and Iraq, two rich countries that had tens of billions of dollars in deposits before the war, owed thousands after the war. Billions of arms debt!

Especially in the United States, in this eight-year war, various arms, weapons and equipment were sold to both sides of the war and made a fortune.Even, they recovered from the economic crisis that occurred in the 1970s due to oil exports to these two countries.

If it hadn't been for the outbreak of the Iranian incident, whether it was Iran or Iraq, it would have never been awake at all. It turned out that the United States had not been at ease from the beginning.

They were doing the racking, they were consuming their weapons and equipment, but in the end their treasury was emptied by Laomi!

How can this make them not irritated!

It is precisely because of this that when they feel deceived, they will abandon their previous suspicions and prepare to cooperate in the development of their own industry, especially the military industry.

Originally, they wanted to buy CNC equipment from the United States that could greatly improve their industrial level, but they were rejected by the United States.

Uncle Ohm said, buy weapons and equipment, no problem, except for super weapons such as atomic bombs, aircraft, tanks, artillery, and even Scud missiles can be sold, but if you want to buy large quantities of equipment for manufacturing these weapons and equipment, no!

There is no problem with a few.

However, what use are only a few of them?

What can several CNC lathes do except for processing the connecting parts of the shells?

Even the engine parts of short-range missiles such as Scuds cannot be processed!

Of course, traditional machinery and equipment can also be processed. Didn't we see that the people of Iran are all engaged in *****?The people of Iraq are busy helping Saddam to extract oil!

Where can anyone spend decades improving their machining operations technology?

"This is the mechanical test workshop of our September 1st Research Institute. Almost all of the CNC machine tools produced by the September 1st Heavy Industry are finally finalized from this laboratory! The big guys under study here are our company Our country’s largest heavy-duty general vehicle manufacturer, Harbin Heavy Industries, has jointly developed a heavy-duty CNC vehicle. Its main purpose is to process large-scale long-axis parts, such as the shell of large-scale missiles...” Knowing that these goods are not very useful for the production workshop. Interested, Wu Zhongda, who had been instigated by Yunfei for a long time, took these foreign soil buns into the mechanical experiment workshop of Jiuyi Heavy Industry, and introduced the heavy-duty CNC vehicles that were about to be successfully developed to these countries that wanted to make high-end weapons and equipment Secretary of Defense.

"Mr. Wu, I don’t know what the price of these heavy-duty CNC vehicles developed by your company is?" After Wu Zhongda just said that such CNC vehicles can be used to process the shells of large missiles, several people immediately passed their interpreters at the same time. Ask for the price.

"These equipment are all ordered by some production bases of our domestic aerospace system. Since they are of no use in the civilian market, they are mainly used for the manufacture of large military equipment, so the price is a bit expensive..." Wu Zhongda looked embarrassed. Looking at these international friends with shining eyes.

In this way, Yun Fei had given it to him in advance.

The design of strategic-level intercontinental missiles is very difficult. There are many key technologies in it. It is impossible to design them without a long period of experience accumulation.Even if it can be designed, it must have that manufacturing capability.

A missile does not fly farther with more fuel.

Sometimes, too much fuel is loaded, and even half of the designed range cannot be reached because of its own weight.

However, tactical missiles, if only missiles with a range of tens of kilometers or even hundreds of kilometers, can be designed by countries with a little capability.

What they lack is only the processing equipment and processing materials to produce these missiles!

"How much money is it?" Everyone's expressions on their faces made their faces embarrassed, but Wu Zhongda's mouth, who had already turned over with a smile in his heart, cracked. He took several deep breaths and suppressed his desire to laugh.

"Because it cannot be mass-produced, if the production quantity of our heavy-duty CNC cars is less than 100, the cost per unit will exceed 2.8 million yuan!" Wu Zhongda said embarrassedly.

Wu Zhongda had already seen Yun Fei's cruelty.

These heavy-duty numerical control equipment, in the international market, there is no shadow at all.

"Manager Wu, how long will it take for your company's CNC equipment to be mass-produced?"