Intelligent Industrial Empire

“We have no such plan as to when it will be mass-produced. Of course, if customers have demand, they can order in advance. After all, this kind of heavy equipment, inventory is too big for our capital..." For customers from Cuba Urgently, Wu Zhongda did not show the joy he should have.

"Of course, if everyone needs it, while meeting our domestic needs, our labor union will accept international orders. Let's visit other equipment under development first..." There is already a semi-finished test machine under trial processing. A thin-walled tube with a maximum diameter of 1.2 meters and a length of five meters.

In order to spend money from these poor local tyrants, Yun Fei had long ordered Wu Zhongda to order such a useless part blank to show the huge processing capacity of these heavy CNC equipment in front of people in these friendly countries.

It looks like a missile shell, but in fact, it is nothing. When these people leave, these expensive blanks that are being processed have completed their mission.

"This is our research and development area for small CNC lathes. We mainly develop high-end CNC lathes with multi-tool positions and high precision. At present, we have successfully developed a ten-tool turret inclined lathe with a repeat positioning error of less than 0.02mm. The high-end CNC car with tight, automatic tailstock tightening is mainly used for the turning of complex rotating parts that require a lot of tools to be processed..."

"This is our machining center technology research and development workshop. Higher precision and higher performance are the most demanding of our Jiuyi Heavy Industry! Now our domestic military manufacturing industry is widely used in the simple four-axis machining center driven by PMC module. The four-axis research was done in this workshop..." When it comes to machining centers, there is so much to say.

While introducing the research situation of machining centers, Wu Zhongda told these international friends that what we can sell is not only three-axis machining centers.

"The three-axis machining center we produce can easily realize the conversion between four-axis and three-axis by adding a detachable rotary table. If you design a special tooling according to the product, you can realize a five-axis machining center. Some of the most basic functions..."

If you can spend a small amount of money, let the three-axis machining center realize the function of four-axis or even five-axis, why not?

After all, the most in demand in this world is the three-axis machining center.

"Manager Wu, I don't know what the accuracy of your company's CNC machining center is?" It was the same old man who first asked the heavy CNC car to interrupt Wu Zhongda.

Machining centers can integrate the functions of many common processing equipment when processing some complex parts, but if the processing accuracy is too poor, or there are always problems, it is not as good as ordinary equipment with scattered processes!

The equipment belonging to the strategic materials in the European and American markets will not be exported to them, and the equipment of the Taiwan machine tool factory that is willing to sell the equipment to them is not only of poor quality, and will not get any benefits other than the machine tool.

The purpose of organizing a group to buy these CNC equipment, which can only be positioned at the mid-range in the world, is to strengthen the relationship with China and obtain some of the technologies they want.

China's technology is not very good, but people can independently produce weapons and equipment, and they have huge design and development capabilities. They do not have the huge land area and comprehensive industrial system of China, and they can only concentrate national strength in certain important industries. development of.

For high-end CNC equipment known as the "soul of manufacturing", only high-end precision CNC equipment with high precision and stable performance can comprehensively improve their overall military industry level.

Now even China can't get even the most rubbish high-end five-axis machining center, so they dare not think about it.But the equipment that can be purchased, the higher the accuracy, the stronger the processing capacity, and the more stable the performance. For countries like them, which lack a large number of technical personnel, it is the most ideal.

If the performance of the CNC equipment produced by Jiuyi Heavy Industries is not good, they will also buy some, just to shoot China, the newly emerged third world after the disintegration of the Soviet Union's big brother.

Of course, if the performance of Jiuyi Heavy Industry's equipment is too poor, they will certainly not buy in large quantities.

Nobody's money is from the wind!

Moreover, many of these countries are poor countries.

No matter how poor you are, you cannot be poor!

This is their perception.

In the early 1960s, the Cuban Missile Crisis showed them that they did not have strong military strength and no right to speak at all.

The Gulf War, which has only ended in a few years, let everyone know that modern warfare simply cannot work without advanced weapons.

Look at the Iraqi people who have fought with Iran for eight years, and have all the assets that have been stored in the country for decades. What is it like to be bullied by Lao Mi and other countries in the world?

"This question of precision is still up to our chief engineer, Academician Sun Lin of the National Academy of Sciences to introduce to you..." Professional matters are left to professional people, which Yun Fei often emphasizes.

"Our machining center, because the research time is not very long, there is still a certain gap compared with the accuracy of the first-class CNC equipment manufacturers in Europe and the United States, but compared with the third-rate enterprises in Taiwan, the accuracy is slightly higher. A little bit. Especially the numerical control system we use is independently developed by Jiuyi Heavy Industry Research Institute, which can be perfectly combined with the numerical control equipment we produce, so as to ensure stable operation during processing and infinitely approach us Design precision..."

When it comes to professional things, it is estimated that few people can understand it.

Sun Lin directly used the equipment of Jiuyi Heavy Industry to compare with foreign counterparts.

In this way, everyone can understand it easily.The ratio is insufficient, but the ratio is more than enough.

"After our tens of thousands of processing tests, within the design and processing range, the tool positioning error of our machining center can be effectively controlled to within 0.02mm, and the machining accuracy can be controlled to within 0.05mm, regardless of what equipment is processed. It can effectively solve the interchangeability of processed parts..."

Sure enough, when it comes to professional things, the members of the more than 20 purchasing groups in front of them are all confused.

"Let's put it this way, as long as the tools are not worn, all the parts processed by our machining center can be interchanged with other parts and will not have any accuracy impact on the assembled equipment or products..." Sun Lin was very distressed .

He knew that the equipment purchased by these small countries could not be used in the civilian field. They all had to be used in military industry manufacturing, especially conventional equipment such as guns and tanks.

But he couldn't use these military industrial parts as examples.

"If these equipment are used to produce precision parts on artillery and tanks, there is no problem at all! Of course, the vulnerable parts on the aircraft can be processed as long as there is data, as long as the three-axis machining center can process it. Inside, it will not be worse than before..." Yun Fei, who entered the test workshop with Li Zhongwei, said openly when the members of the investigation and procurement team were confused.

Jiuyi Heavy Industry was originally a confidential unit, and these people in front of them can be mixed to such a high position, it is impossible for the United States or the ghost country to be spies.What are these devices used for? Everyone is tacitly aware. What is the difficulty of giving an example?

"Boss Yun, hello..." The fat old man who had talked the most since he visited Jiuyi Heavy Industry saw the appearance of Yun Fei, the boss in charge of the company, and he turned around and opened his arms exaggeratedly and hugged Yun Fei.

"General Castro, hello..." Yun Fei was very impressed by this guy from Cuba.

This group of people is estimated to have the highest status.

Raul Castro, the younger brother of Cuban leader Fidel Castro, the first deputy secretary of the Cuban **** Association, and the old guy of the second secretary of Cuba, came to visit September 1st Heavy Industry last year At that time, I wanted to have in-depth communication with Yunfei, a young Chinese private boss, but due to the presence of China’s greatest old man, it was difficult to leave the team. Later, because of various things, I never had a private conversation with Yunfei. .

However, the two often exchanged letters. Yun Fei often used the various unproven policies and guidelines he collected from Du Niang in his letters, as well as the construction process of farming literature in online novels, to follow this in the 20s. The guys who led Cuba’s economic reforms a century later discussed how to develop the Cuban economy.

Of course, one of them is in the Eastern Hemisphere, the other is in the Western Hemisphere, and a letter will usually take ten and a half months.And this is still in the case of someone delivering the letter!

Many times, Yun Fei was wondering that the Cathrot family found a translator proficient in Chinese from that corner of Cuba.

"Boss Yun, let me call me Raul..." The translator on one side heard the words from the second most powerful leader in Cuba, and was so shocked that he was silent for several tens of seconds before translating it.

"General, let's visit first, I think, this afternoon or evening, we should have a very long time to communicate..." Yun Fei smiled and said to Raul Cathrot.

"Of course, this time I plan to stay in China and spend your Chinese years before going back..." Hearing the translation, Raul nodded and approved Yun Fei's proposal.

...............

"You guys, I believe everyone has seen the processing capabilities of our products. We will not repeat too much about what products can be processed. I think it is better to follow us after you decide to place an order with us. General Li Zhongwei of China talked about it before making a decision..."

This time, when the delegation first arrived in China, it had reached an agreement with the Chinese military on the introduction of some military equipment manufacturing technology. Just after getting off the car, Li Zhongwei explained to Yunfei.

Of course, Li Zhongwei did not disclose the production technology of military equipment that these countries have introduced.

At least, super strategic weapons such as atomic bombs and hydrogen bombs will certainly not be within the scope of the agreement!

Even Lao Mei dare not export these gadgets to foreign countries!

Starting this year, the military will undergo a full refurbishment, but due to funding problems, it may last a long time.

Under Yun Fei's suggestion and within the scope of Li Zhongwei's authority, the equipment and technology in the scope of this agreement have been expanded a lot.

In Yunfei’s words: “Why can both the U.S. and Lao Maozi be able to export advanced weapons and equipment, so we can’t export it? Why can’t we export the production technology of medium-range missiles? We expect to export finished products? When the naval capabilities of China are not able to escort the fleet that exports these advanced equipment, others dare to buy, do we dare to sell? Didn’t see the pirates in Somalia run wild? Don’t people dare to grab China?"

Moreover, only by exporting such high-end technology can we make money!

The production of medium-range or short-range missiles is not something that can be produced with equipment and materials.

To produce these gadgets, there must be a complete industrial system.

Design, materials, processing equipment, supporting factories, etc., are all indispensable.

These countries, even if they purchase equipment and production technology, will they still manufacture engine technology related to it?

Technology factory?

Therefore, if they have the manufacturing capacity, the rocket engines used by China can be exported!

This is equivalent to finding a long-term meal ticket for the military.

Moreover, these countries have to import materials from China!

Perhaps, European and American countries will continue to hinder China's entry into world trade because of China's export of weapons and technology to these countries.

If China does not export weapons technology, will they create less resistance to China's entry into the WTO?

Damn, if you run them to export all kinds of high-end weapons and equipment to the world, then China will not be allowed to export?

Go to special!

Anyway, missiles with a range of only tens of kilometers or hundreds of kilometers are all conventional weapons and equipment, and what China exports are all traditional poor countries.

No matter how poor these countries are, the profit is much higher than in China, where you can only export the most inferior weapons—guns and guns—to some tribes in Africa.

If you don’t count the small number of tanks exported to Pakistan and other small countries, as well as some backward fighter 7, perhaps the shoulder-mounted portable rockets that China exports to the African market are the most advanced weapons and equipment exported by China in this era. Up.

Lao Mei has exported hundreds of billions of dollars in arms to the international market a year!

It is precisely because of this that, under the seduce of Yunfei, Li Zhongwei did not even do the work of requesting instructions and reporting to his superiors. He agreed to Yunfei's proposal to export some high-end weapons and equipment that are not advanced in China to these countries. Manufacturing technology.