Magi Craft Meister

"Of course you can. If you have the material you want, you can talk to Butler B or C."

When Greena and Freddie approximated the story of wanting to do a study of "wind floaters" at Nido Castle, Jen admitted it in a good mood.

"Good for you, Freddie"

"Oh. Shall we build a basic fuselage first"

"Right."

Using light silver (= titanium) for the skeleton, Freddie and Greena began making the original 'wind floater (blow floater)'.

"" Deformation "!" Deformation "!"

"Ugh, that's nasty... why is it so hard to determine dimensions in one shot?

Freddie is blurry.

Very small objects are both magician (Magicraftsman) crying because slight errors make a big difference and extremely large ones are hard to grasp the dimensions.

"Master Jin is easy to do..."

"... I don't think I can compare it to that guy"

"Right."

"Let's do it at my pace"

"No objection"

Freddie and Greena were in agreement.

"... so you keep it for three at a time, huh?

"Yes. Basically, we ride together, but you think we need some extra time"

"I agree. Should I do that to dimensions about Master Jin's 'taube'?

There, Butler B gave me some advice.

"Approximately, though there is a table of weight and wing area relative to it"

"... what do we do?

"I guess I can look at that. Because it wouldn't be a value that varies from person to person."

It's like a function table, so you don't have to bother to find out for yourself if it's a universal value, you wouldn't mind referring to it, Freddie said.

"Hmmm...... I guess so.... Right"

Greena also agrees and will determine the diameter of the main wing disc wing.

"It can be combined with a blowing engine. Why don't we make room at first and make it bigger?

"Yeah, I think so."

Two people going about their work like this.

Sometimes I fought my opinion and spent five days completing one Wind Floater.

"Hmm......"

And Freddie and Greena had asked Jen to do an overall check before the test flight.

As for Jen, he is not in his skill, and he likes the way the two of us have asked him to check it out.

So I carefully carried out the check.

"Yeah, yeah, the joints are strong enough, and there's no material bias. No problem with the skeleton."

Jen takes the stage to carry out the checks and inform him of the results.

"Did you use light silver that was also thinned on the wing surface? It's strong enough now, but we should think about it a little bit more in the future."

"What do you mean?

To Jen's words, Greena listens back.

"Now it's good because the backbone of the main wing is shaped like this, but if it's shaped like an elliptical or rhomboid wing or something, it could be partially under-strengthened"

In order to receive the wind from below, Jen explains that there is always a 'peeling' force applied.

"The weight will increase, but you should also add a little more rib (small bone). In that case, doing a good meat drain reduces weight gain."

"... is that what you mean, I get it"

"The output of the blowing and floating engine (blowing engine)... seems to be able to afford it. It'll be enough."

"I'm relieved"

On Jen's last check, Glinna lowers her chest.

Freddie, on the other hand, is thinking about improving what Jen pointed out for herself.

"Dear Ginn, just now, is it okay if it's 'Underground Spider Resin (GSP)' that you put on your wings?

It can be said that the most required for the outer plate of the wing is the pull strength.

The "Underground Spider Resin (GSP)" from Penglai has a higher pull strength than the unenhanced light silver.

"Oh, that's a good focus. In that case, we'll have to increase the number of ribs more."

"Yes."

Freddie was pleased to have Jen acknowledge her thoughts.

"Dj, Master Jin, do you have a knack for 'meat draining'?

Greena asks in a bit of a panic. Do you think Freddie crossed the line?

"Right. Think of the structure and do it without losing strength...... So that's it. You should look into structural mechanics."

"Okay!

Structural mechanics is a bit daunting, but there are also such materials in Erdo Castle.

Strength against bending, for example, but taking angles of constant length as an example….

What will happen to the strength (same material and length) relative to the longitudinal bending of the square material of 1x2, 2x1 and 2x2, based on a cross section with 1x1 vertical x horizontal?

It is structural mechanics that gives the answer to that.

If the intensity of 1 × 1 is set to 1, the intensity of 1 × 2 is 2, and the intensity of 2 × 1 is 4. That means 2 x 2 is 8.

In other words, a longer cross section is more intense in relation to the direction of bending.

From now on, the strength against bending is strong on the upper and lower sides of the bend, so I can derive the answer to where to go if I want to drain meat...

Also, the quadrangle distorts with force from the side, but not the triangle. This is called truss structure.

A truss structure can be used to create a strong structure with thin members.

It's a dome roof or a muscle crossing between a column and a column.

In addition to this, the 'ramen' structure is firmly fixed so that the junction does not move.

H-shaped steel, often seen in steel as a cross-sectional structure, and L-shaped angles and C-shaped channels employed in aluminium. Honeycomb construction.

Hollow pipes are also products of structural mechanics.

gossip.

Jen suggested accumulating such necessary knowledge without giving a direct answer.

"That's right. Me, it's more practice than knowledge! Thought so."

Jen laughed when she heard that.

"Ha, I might feel that way when I have a strong artisanal temperament. Conversely, researcher temperament may be a knowledge priority. Which is better. It's not bad, and it must be balanced."

Greena is artisanal and Freddie is Jen who feels like a researcher. This would be a partner that could make up for this, he said.

"Anyway, you can try flying it"

Greena asks.

"Oh, fine. But be careful, okay?

"Yes.... uh, I'm thinking of asking 'Shall' to be a test pilot"

Char is a girl-type automatic doll (Automata) previously made by Greena with brown eyes on red hair.

"That's good."

Jen himself, Reiko and Jen D are often entrusted with commissioning. Well, neither Greena nor Freddie has ever operated a wind floater.

Although Greena had once piloted the elliptical wing 'Tempest' on a pilot.

Safety comes first on the raven and on the corner.

Greena and Freddie were to fly the test of the prototype Wind Floater (Blow Floater) No. 1 in front of Jen, Reiko, Butler B and C.