My pet is snapping turtle

Just, the arm is screwed.

Feng Xuesong is the director of the workshop, a hand of this workshop, although the Van Gao Zhizhi is a senior technician, but still dare not, can only arrange the tricks in the old man.

The test knife started.

Seeing the tools they brought by Han Guang, whether it is a drill, or milling cutter, all black and black, his heart is slightly strange.

But it is only slightly stunned, and there is no more asking, guess this may be a new product of Taishan alloy tools.

He thought about it, how is the new product, certainly unable to compare with the tools of Shante.

After some preparation, the test knife began.

The parts processed are the same as those next to the CNC center.

Like the parts, the two CNC machine tools are the same model, the NC machining processes adopted.

Ready, try the trick!

This CNC machining center works, everyone is quiet, approximately two or 30 minutes, the first parts are completed.

The CNC machining center stopped, and the workers in this machining center immediately check.

First look at each tool, whether it is a drill bit and a milling cutter, the visual inspection does not have any questions, and it has been measured by the workpiece, and then loudly.

"Feng Director, Fan Engine, and tools do not have a half problem, and the parts are processed."

what!

Is there a half problem?

Fan Gong's careful personally looked at it, seeing really there is no problem, can't help but wonder, I still see Han Guangquan and others, and the eyes seem to say, this is impossible.

However, just the processing of the first part, maybe you can't explain what, Van Gao Yi did not say anything, just a little box.

Feng Xuecong is a line in the field of processing. He is previously the technical director of the workshop and has a deep accomplishment in mechanical processing technology.

He also personally looked at the parts of processing, and also looked at the tool and nodded gently.

It is also very popular with the machined iron filings. If you think, you will nod.

An experienced technician often can see some clues from the machined iron filings.

Continue processing.

The worker installed the second part and completed the knife and prepared for processing.

"Feng Director, I saw the processing parameters, the speed of the speed is low, and the speed of the drill mill is only 500. I suggest it to increase to 1500 revolutions, or higher.

what!

Fan Gao Yi is going to expose, it is preparing to say loudly, you don't understand machining, this is a high temperature alloy, typical difficult processing materials, using 1500 revolutions, what concept!

But his words have not come yet, and Feng Xueong raises his hand and interrupted.

Feng Xuecong, "Han, so confident in your knife, really use 1500 revolutions."

"I think I can try it, I think there is no problem with the speed of 1500 revolutions." Han Guang is very confident.

Feng Xueong just hesitated, then nodded, "That line, the speed increased to 1500 turns, let's try it."

Van Gaohe: "..."

He still didn't say anything, because he was interrupted by Feng Xuecun. Just now, Feng Xuecong looked at the condition of the tool and the case of iron filings. I feel that I tried the speed of 1500 revolutions, it should be possible.

The machining CNC is immediately modified, and the speed of the drilling and milling has increased to 1500 revolutions.

Press the start button and the processing begins!

This time the processing speed is much more, the first parts are processed for more than twenty minutes. This time only only seven or eight minutes, the time is only about one-third of the first part.

Processing!

The machining center stopped, and the guard door opened. Everyone has gone through the past, and I have seen it carefully.

"what!"

Feng Xuepeng was slightly surprised. "Han, your knife does not change, and it can't be worn."

Two parts are processed continuously and are typical difficult to process materials, and 1500 revolutions are used, and the general tool should be changed.

Han Guang also looked at the case of the tool and looked at the parts of the parts.

Some tools really do not have a change in change, can't see a wire wear.

Suddenly, he was in the heart, and the experience told him that the tool made of black alloy was not general.

After confidence, Han Guang recommended the road, "Feng Director, processing speed increased 3000 turns."

Feng Xuecong said, "Yes, we will try the processing speed of 3000 revolutions."

After some preparation, the third part processing started.

The processing speed of 3000 revolutions was originally only three or 30 minutes, and it was only available for three or three minutes.

"Oh my God!"

"You look at it, the appearance of the parts that work is still very beautiful, and it is incredible that this set of tools do not have a slight wear."

"It's amazing, this tool really can't see any wear."

"......."

The whole site is excited. Everyone is a good look, only Van Gao Zhi did not speak, Shen Hao face, only one thought in my heart, this is not scientific!

The fourth part, sixth part, seventh parts ...

The processing speed of 3000 revolutions is simply improved, and one part is machined every three and four minutes.

After a part, this machining center is cheering, and there are more and more people, and some workers and technicians will run through the news.

Such a big movement soon, it will soon attract the idea of ​​people who are not a unidirection.

They fog!

This is how the same thing?

Try a knife, how is the movement of the Taishan knife so big, one by one seems to play the stimulant, one of the technologies of Shante quietly makes it.

After reading a few minutes, he was a horror, and the heart didn't really.

Nima, three, four minutes, processing a part, the key is that the tools provided by Taishan Group have been processed for more than a dozen parts, no need to grind, there is no three-point wear.

This is not scientific!

Scorpio, how can there be such an alloy tool in the world, this is really unscientific!

After a long time, he went back to God, and his mood was lowered to the next machining center, and his face was bitter.

At this time, their parts were completed, and the same parts were used for more than twenty minutes.

I know that the Taishan Group is three or four minutes, and he has completed a part. He shook his head helplessly.

Shante's tool has a significant wear, and the fourth part has been processed, and the tool needs to be removed to develop or replace alloy blades.

"Old Chen, what is this?"

Some people noticed his look, and some people didn't understand.

.........

The second is more sent!