My pet is snapping turtle

Chen Shen can only sigh, smile, laugh, Taishan tool is too big to hit him.

He did ten years in this industry, and he did several years in the Shante knife. He always thought that the Sand's tool was the best in the world.

The situation next to it has greatly subverted his cognition, and the whole person is not good.

"See the tricks of Taishan tool next to it?"

"I saw it, I really don't understand what they are calling."

I heard that my colleagues actually didn't know what was going on, and he was more bitter in his heart.

Chen Shen sighed, "That is what they cheered, their set of tools, using 3000 revolutions, have been processed for more than a dozen parts, the tool does not have a slight wear, the processing of parts is also complete Qualified, very beautiful appearance. "

what!

This is impossible!

The few people in Shante were stagnant, and they came back for a long time. The first reaction they came back and god was not believed.

How can there be such an alloy tool in the world, if you really have, it will be born in the mountain, not a Taishan Tool Group.

The two foreigners who quietly opposed the eyes, then nodded gently, quietly arrived at the side of Taishan tool, elongated the neck, erect the ear.

Among the crowd, it was an explosive voice, another part was pretty processed.

"This is the first one."

"It is already the 21st, the tool has not been worn for a half point, and there is no problem with 21 parts."

"My God, today is a rising posture, a set of alloy tools, dozens of parts, I have seen it for the first time."

"The key is that these are all high-temperature alloy parts, typical difficult-processed materials, next to the people in the trial, I heard that a set of tools can only process four parts, and then take the tool to get down to wear Or replace alloy blades. "

"It's just like dreaming, when is our domestic alloy tool so when it is so batch.

There is also a lively scene, more and more people who come and watch the lively, almost three floors, three layers outside.

The two old faces of Shante gradually sink, know that this time the trial is completely faced.

The two faces are all right, and the gray is returned to their side, and the situation will be said, Suddenly, the few people of Sandte are all hit.

Don't play this at all!

A set of alloy tools is a tens of parts, that is also a fart, it is not comparable.

Slow, I can only slip.

These people have packed things, and they are glowing.

Afternoon.

This batch of 45 pieces, this CNC drilling and milling process may have time to consume two or three days, and it is entirely processed for a long time.

"Hey, this is too big, this set of tools can not see obvious wear."

"It's a bunch of cattle, it is an eye."

"....."

Those workers next to the onlookers, the technicians are hot, one is very good, almost directly, the Tams Group's set of tools is too boss.

All parts are all completed, check all the qualifications, and the alloy tool is finally unloaded and enlarges on the knife.

It is only to see the wear of a dock, and it is slightly more clear to zoom in to 50 times.

Feng Xuesong is very satisfied, it is simply a laugh, "Han, the tool wear is very small, and there is no problem with it, and then processes the second and thirty parts.

At this time, Han Guang's mood is so good.

The heart is also full of gratitude, the gang brother gives me this black alloy, gave me such a big surprise.

He has a keen realize that there is such a black alloy, in the future, the high-end alloy tool market is basically no foreign tool business.

After the drilling and milling process, the alloy tool is perfect, bringing great surprises to everyone.

In addition to the drill and milling cutters, Han Guang also brought a few car alloy blades.

Han Guangdao, "Feng Master, then we will try a trial car alloy blade, how."

"Good wow!" Feng Xuemeng agreed, seeing the few boxes of the cartoons that Han Guang took out the black and black, the heart was excited, and I look forward to it.

How is such a blade performance? How many parts can a piece of blade?

Make arrangements!

Feng Xuesong loudly, "Fan Gong, where did it?"

Many people look forward to finding it.

There is a technical manner, "Fan Shen has long been gone, he is not here."

Feng Xuecong is slightly dissatisfied, "" I can't see this time. "

There is also a face here. When he processed to a dozen parts, he quietly slipped.

He knows that today is faced.

He is very respected to import alloy tools, which is simply unbearable.

Taking others don't pay attention, he is asyging.

Feng Xuesong called another senior technical personnel, then, then, the test knife of the CNC turning process began.

The same or high temperature alloy material, this material turning is poor, especially the wear of the tool is relatively large, and the alloy car cuts cannot be cut two, and the three parts need to be replaced with alloy blades.

The workers in this CNC lathe are preparing, such as the black-black-bright alloy blade that is installing the Taishan Group, the parts to be processed on the table, and so on.

Han Guang, Feng Xuecong, etc., after watching the grid processing procedure, after reading, Han Guangdao, "Director Feng, I think the parameters of the CNC machining program should be changed."

Feng Xuesong agreed.

Thus, the original machining speed 30 is changed to 200 turns, the crude vehicle depth is 0.8 mm to 2 mm, and the depth of the fine train is 0.3 mm to 0.5 mm ...

After the parameters are modified, the machine is started and the turning begins.

Similarly, the number of people next to this CNC machine is surrounded by workers, and some technicians, and some groups of team leaders.

"Wow, the speed is so fast!"

"Seeing that there is no, so fast, the lathe did not have a half-bit shake, and the sound is small."

"This is the true moistening thing."

"Really been waiting!"

Originally this to the process car cut a part for about 55 minutes, only 12 minutes, turning is completed.

The machine tool guard door opened, everyone first saw a very beautiful part, the surface shining like a mirror.

Experienced people know that the surface of the part is so bright, indicating that the alloy tool processed is very sharp.

Niu batch!

Eye-opener!

Surround, everyone comment on the head, almost one by one, and it is all the colors.

Check parts, qualified!

Check the tool, no half of wear, still like a brand new!

The second part, the third part, the fourth part ...

Take it until the evening, this batch of 42 pieces, all of which are completed, and the alloy car has not reached the extent to which the alloy blade needs to be replaced.

This is going to be before, who is a letter!

Next day, afternoon.

Han Guang took a thick test knife report, and took several samples of alloy tools, he quickly went to the Global Building.

.....

Third!