Successful fruit picking system

Netizens looked at Peng Teacher and the students first wrote painting, and sometimes in the paper, sometimes used a computer.

However, the lens did not spoilently designed such a similar article, it seems to stay the suspense to the back to let everyone go to see ...

Then, I saw them with this volleyball size, the high-end multi-axis CNC machine tool with this volleyball size.

Some netizens asked, before cutting the stone, using the machine tool and the saw blade when the jade is going out, but this jade has been taken out, is there any hand carved?

Do they have a team ready to engrave with a machine?

Is it not a manual, is it worth money? Is it good to have a good craft? Not a handmade carving, what should I calculate?

Of course, some people say that manual, manual, is to produce products with hands and tools. Ancient artists and tools have an ancient tractor and tools. Today, there are tools for today's craftsmen, so they can't use more modern tools. ......

In fact, Mr. Peng is what they have to do this, in addition to implementing their own philosophy, using a more advanced technical process, follow-up, there is a traditional handicraft section, so this will be a beautiful crafts combined with ancient and modern crafts!

This machine in front of the audience appears. It is a circular number control center on Friday, not the world's most advanced machine tool, but it is definitely the first echelon, which is one of the most advanced existence in the machine tool of the big summer!

A lot of machine tools, it is definitely often spit and easy to tear tearful topics ...

Mainly because of civilian fields, commercial machine tools, generally high-end are all machine tools from next to the island or old Europe, including supporting CNC software.

After all, we must consider cost problems such as good quality ...

However, once the military products are reached, they can only rely on the domestic machine, even if the safety problem is not considered, I really want to use people, people are not willing, the blockade is still too late ...

Therefore, the big summer is not without high-end machine tools, but basically stay in the military field, and the private basics are basically used.

So, many people see the colorful foreign high-end civilian machine tools in the factory, and they have been spitting big summer seemingly developed. In fact, even the most basic machine tools, the machine's machine, but all are foreign ...

This is not right, but only on the civilian commercial machine, in fact, in the military field, the related machine is still two brushes, otherwise the big summer invisible fighter and international first-class ship use what creation?

For example, a large machine tool such as a carbon fiber wing and other components such as the invisible fighter, the beautiful country can purchase automatic paving machines directly from the Old European Spain Kingdom, tape the machine, and the big summer military work can only find a way ...

As for the civilian field, the big summer is on the one hand to compete for the domestic civil aviation airline market, get some opportunity to produce aircraft components to the old Europe, and get a part of the Machine Tool and non-core technology of the Spanish Kingdom to make carbon fiber aviation components. ,

Core technology is of course self-studying. Related companies is the Flying Industry Group, located in the southwestern suburbs of the side of the side of the side of the side, with the same satellite urban area with the factory to the Rockets aluminum shell.

Yes, I said that I said that I said that there is a crane tail in the second-tier city in the side of the side.

The Flying Group has a composite research base, which can give the wing skin, paving, paving,

The reason why it can introduce and land this civil project, then climb the learning curve, and finally digestive absorption becomes themselves because they have done the armed helicopters and micro-spacing passenger aircraft, with relevant technical accumulation and industrial basis.

However, they are not very good in recent years. After all, there are also aerospace industries, and people's industries are upgraded faster.

Said to see this CNC machining center before

Not only hardware is from a military engineering self-research machine tool, but the numerical control system is also a large summer, from Xia Zhongzhong series numerical control system from Xiazhong University of Science and Technology.

The reason why the United University is a domestic machine, and it is also a domestic numerical control system. First, because of Germany's Ximen System to participate in sanctions, it is not open to them.

Even if you can use it, you can also limit a large part of the key function, only open a small part ...

The second is that the fruit and the United Congress have begun to costly, systematically abandon the use of these products before being sancted, and changed to the use of domestic ...

Or the sentence that I have said, this is not a populin, but it is really for survival and development.

Otherwise, the project is engaged in the neck, then who is getting ...

I said that there was a military technology in the stabilizer system. At the time, I thought that I was authorized to pay for foreign technology, I was not as good as the military in the future. Military, herself in self-research, while putting the military's military transit optimization.

Including high-speed motor and eddy current separation techniques for previously smart home appliances, the military helicopter engine and the separation system of preventing dust dust from being sucked into the scroll engine also have related technologies, but they can't go to the civilian level. After all, it is manufactured. Since the industry has already had foreign mature civilian technology, it will come to find the big summer army at all, and then save money and improve any civilized development and improvement ...

And the United Nago Research Center did not have this issue, they have funded, some talents, and have a strong reserve forces that have been bonded by the successful fruit of the study.

So, any technology that can work and improve the technology, then take shortcut;

No, then I have developed myself.

Because of this operation, the Federation of Research Center has achieved various technical issues in a short time, not what miracle happened ...

And the choice on this route also leads to the finals of the UNAMSION, which is the road like the big summer heavy-duty, rather than the joint venture route ...

The summary of these Linlin added, and it created that there was a lot of manufacturing inspirators who appeared in the camera at this time. I didn't recognize what brand of CNC machining centers.

It is a small number specializing in the military department to develop this machine, see the machine that is involved in the R & D, excited to introduce the netizens ...

The whole pizewor did not cut the plane to facilitate the clamping of the machine, but directly adopted a flexible matrix clamp that was good at clamping an irregular object.

The process of positioning is passed by the lens, and then people will see the machine start processing according to the design graph.

Originally, I saw the spindle head like a flexible machine arm, cutting, replacing the knife head, with a dynamic stepping point music, everyone has already thought that this machine is very powerful, as if it is a kind of enjoyment,

Unexpectedly, in order to increase the processing latitude, and to avoid the stroke of the spindle header, the rigidity is insufficient, the clamp is actually cooperated with the spindle cutter head like the robot arm, which has become like two flexible arms in each other. Team with processes!

Is this a multi-axis multi-linking machining center? It is simply another form "mechanical manual"!

About the knife head, the narrator also has an introduction.

I still remember that I have a large amount of diamonds before cutting, and I will cooperate with the Central Plains Industrial University. Is it developing a diamond nano-coated cutter head and grinding head?

Diamond hardness can be drifted, let alone jade!

Of course, considering that the hardness is more brittle, the basic use is a grinding head, a saw blade, and not a bite series.

Continued ...