Successful fruit picking system

As the head and the clamp end, the flexible roller is moving, this volleyball size is gradually showing some of the equipment characteristics.

For example, in a corner, people have seen the contour of the chain chain ...

Some emerald players know that there is a technique of engraving the serial chain in the jade engraving technique, and usually in the great amount of jade, after all, I want to engrave a buckle and the chain of each other, it is simply Like a whole piece of precious wood to make a big ornament, the last car is a bead and a pile of powder ...

Moreover, the jade lock chain is very sleeper, which is very sleeper, compared to the fixed carved, the ring buckle of the chain must also be active as the real chain, which is difficult.

After the partial contour of the lock chain ring buckle and a similar octagon tip object connected to this partial chain, Peng Teacher who stopped the machine, did not continue to process, but remove this At present, only a small portion of the object is processed.

Then, see Peng Teacher demonstrates how to connect a portion of the structure that is still connected to each other with a fixed lock loop to each other, be careful to cut separation, become a real-active jade lock chain, which is a bit like a mold casting or After 3D printing, put the items from the support column.

Of course, it is necessary to manually polish the traces of the loop buckle to break, so that it becomes a smooth and perfect jade chain.

After Peng Teacher Demonstrate, let students get started, try to separate the remaining locks and buckles and complete the grinding.

Next, they put the above-haired active jade lock chain, reinstall, fixed, and prevent the free shake chain while the latching chain will be dismantled.

Then they came to the cutter, find the positioning, the octagonal tower connected to the jade chain, cut from the whole pizza that has been processed by the machine.

Netizens saw some ends, which was a cover that was connected to the theme item by jade chain.

Someone has begun to guess what is doing,

Purple incense burner? The octagonal tip will not be a pot of teapot?

Return the octagonal tower and the chain that has become a movable component, and then the whole porp is once again put in the CNC machining center, repositions, and start processing again ...

First, the inside of the octagon cover is hollowed out, followed by this octagota cover, the kettle portion to cover is taken out, but it is not completely hollow.

This part is to cover the cover, fix it, and then process the overall outline of the object outside, the last thing is to return to the interior of this jade container, not first, then processed an empty shell.

Although as long as the machine is powerful, it is not necessary to take the jade container shell to rupture, but for insurance, the processing steps are designed from the beginning, it is designed to reduce the probability of problems.

Some netizens saw that it is ridiculed, saying that the small pieces that are pulling down can not give themselves ...

The octagonal tower is applied to a special colloid, which is behind the container, bonded, including the chain of the active state, and is also re-sealed by colloid, like a bridge, so that the cutter head continues to process this Emerald container housing.

Finally, the object re-locates again, repositions, start processing again ...

Gradually, an octagonal whose contour of the upper kettle cover is displayed, and many of the prodence of this is a purple tea pot is confident that I have guess it.

Subsequent video accompanied by China's wind and electrical sound given by Zhai's fruit, starting to use acceleration concentration mode,

The audience see the eight-faceted pots, as well as the spun, potles, etc., and each face is also a different Xusui grain decoration.

Finally, remove the octagonal cover on the body and the colloid on the jade chain, and then don't worry about the glue, and firmly fix it in the side of the pot, and then start the inside of the kettle.

Some people say that considering this emerald volume, the purple cylinder that can be taken inside can also open a lot of bracelets.

But the final part is made a pair of purple grains with this purple gorghum pot ...

After the interior of the hollow pot, it has come to a more difficult process:

Top the kettle mouth to the water in the pot body ...

Internal and external crossings, no problem;

Finally, the tunnel is connected to each other as each other, constitutes an inner, and it can go out of water.

Teacher Peng will hold the purple gorghum pot in the hand, filled with water, and even see the internal shaking water through the wall of the ice pot ...

When they try to pour water before the lens, the water can flow smoothly, and the vent hole on the lid is pressed with a thumb, because the atmospheric pressure relief is stopped instantly, this proves that the octagon lid is combined with the pot Although it is possible to ensure smooth open closing pot cover, the accuracy is sufficiently strict.

To know that the pot cover and the pot body are an octagon, it is not more vulnerable to grind the process,

Even the ancient simple pedal wooden lathe can be made more convenient to work, polished the cylindrical object, if converted to the octagonal or three-dimensional octas, then the craftsman can use handmade a little bit of sealing each The corner, and then try the temperament over again ...

Here, this purple has not yet been able to get the most critical part, because a good pot is not only the airtightness of the binding of the pot and the body, causing the venting hole to freely Control the water situation, but also see the water column form of water ...

Yes, this is actually involved in fluid mechanics ...

When a good pot is paying for water, the water column forms a perfect curved shape, the water column is not distorted, and the fission is constantly cracked into a flounded form ...

So, then they repeatedly carefully polished the morphology of the mouth and the inner waterway and the inner wall of the waterway,

This step is time, even more than the previous processing pot, the pot cover, the jade lock chain of the lid and the pot body is still long!

In fact, when they were originally designed, they had already considered this problem, and even the plastics of a whole mold first carved the physical model, and also found the physics teacher, and ask how to design the water flow. Like a perfect curved glass column ...

After repeatedly adjustment of the homework in the previous period, this porchot is finally reached in the water, even if the pot is pulled to a distance from the water cup, the water column can still present perfect radians, not distortion, and fracture!

Continued ...